User Guide

7
∫ Television with COMPONENT VIDEO IN terminals
The COMPONENT VIDEO OUT terminals provides a purer
picture than the S-VIDEO OUT terminal. These terminals
can be used for either interlaced or progressive output.
Connection using these terminals outputs the colour
difference signals (PB/PR) and luminance signal (Y)
separately in order to achieve high fidelity in reproducing
colours.
≥ The description of the component video input terminals
depends on the television or monitor
(e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of
the same colour.
≥ When making this connection, select “Video/YPbPr”
(Video and YPbPr) or “S-Video/YPbPr” (S-Video and
YPbPr) from QUICK SETUP (➜ page 11). If “RGB/No
Output” (RGB only) is selected, the RGB signal is output
from the SCART (AV) terminal, but no signal is output
from the component video output terminals.
To enjoy progressive video
≥ Connect to a progressive output compatible television.
≥ Set “Video Output Mode” to “480p” or “576p”, and then follow the instructions on the menu screen (➜ page 28,
Picture Menu, Operations Guide).
≥ Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible.
Consult the manufacturer if you have another brand of television.
r
s
S-VIDEO
S-VIDEO
OUT
OUT
R
L
AUX
AUX
VIDEO
VIDEO
OUT
OUT
P B
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
P R
Y
Digital Transceiver
AV
VIDEO IN
S-VIDEO
IN
COMPONENT
VIDEO IN
PR
PB
Y
AUDIO
OUT
L
R
Television
(not included)
Back of this unit
Video cables
(not included)
Audio cable
§
(not included)
§
This audio connection will enable you to play audio from your television through your home theater system.
Refer to “Operating other equipment” (➜ page 39, Operations Guide).