User Guide

11
The QUICK SETUP screen assists you to make necessary settings.
To display the picture from this unit, turn on your television and change
the television’s video input mode which is
connected to this unit (e.g. VIDEO 1, AV 1, etc.). To change your television’s video input mode, refer to its
operating instructions.
≥ This remote control can perform some basic television operations (➜ page 39, Operations Guide).
To change these settings later
Select “QUICK SETUP” in the “Others” menu (➜ page 32,
Operations Guide).
∫ Details of settings
≥ Boxed items are the factory settings in the above diagram.
STEP8 Performing QUICK SETUP
ENTER
RETURN
DVD
SETUP
1
Turn on the unit.
2
Select “DVD/CD”.
3
Press and hold to show
the QUICK SETUP screen.
4
Follow the messages and
make the settings.
≥Menu Language
≥TV Type
≥TV Aspect
≥Video Out (AV/Component)
(For details ➜ below)
5
Press to finish QUICK
SETUP.
6
Press repeatedly to exit.
Select
Register
ENTER
Menu Language
Choose the language for the
on-screen messages.
≥ English ≥ Français ≥ Deutsch ≥ Italiano
≥ Español ≥ Polski ≥ Svenska ≥ Nederlands
TV Type
Select to suit the type of
television.
≥ Standard (Direct View TV) ≥ CRT Projector ≥ LCD TV/Projector
≥ Projection TV ≥ Plasma TV
TV Aspect
Choose the setting to suit
your television and
preference.
≥ 4:3 : Regular aspect television
≥ 16:9: Widescreen television
Video Out (AV/Component)
Choose the video signal
format to be output from the
SCART (AV) and Component
terminal.
≥ Video/YPbPr : Video and YPbPr ≥ S-Video/YPbPr: S-Video and YPbPr
≥ RGB/No Output: RGB only