User Guide
25
RQT7621
RECORDING
Timer recording
[HDD] [RAM] [DVD-R]
You can enter up to 32 programmes up to a month in advance.
Entering VIDEO Plus
r
numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
≥Using VIDEO Plusr numbers for Satellite stations or Cable TV
stations
Set this unit to recognise VIDEO Plus
r
numbers for Satellite stations
or Cable TV stations before you start the following operations
(
➡
page 17, VIDEO Plus
r
numbers for Satellite/Cable TV stations).
1 Press [VIDEO Plus+].
2 Press the numbered buttons to enter
the VIDEO Plusr number.
Press [2] to move back to correct a digit.
3 Press [ENTER].
≥Confirm the programme and make corrections if necessary
using [3, 4, 2, 1] (➡page 26, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information on a TV
station, it is kept in the unit’s memory.
≥
You can also press [REC MODE] to change the recording mode.
≥PDC (➡right): ON!)OFF (– – –)
≥
You can also press [HDD] or [DVD] to select the recording drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (➡ right, Relief Recording).
≥RENEW (Auto Renewal Recording) [HDD] (➡page 26)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press
[ENTER] (➡page 38).
4 Press [ENTER].
The settings are stored.
Repeat steps 1–4 to programme other recordings.
5 Press [F TIMER].
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
≥The message screen
appears. Play is only
possible while timer
recording is in standby (➡page 28, 29). (You cannot play a
title recorded using a different encoding system from that of
the TV system currently selected on the unit.)
≥
The unit is not off. To save power, turn the unit off by pressing [
Í
].
Using the VIDEO Plusr number to
make timer recordings
CH
VOLUME
SKIP
STOP PAUSE PLAY/
SLOW/SEARCH
CANCEL
123
4
5
6
789
0
HOME THEATER TV
EXT LINK
MULTI REAR
DUBBING
S.POSITION
CREATE CHAP
C.FOCUS
REC MODE
CH SELECT
RETURN
ERASE
TIMER
TIME SLIP
AV2/OPT
TOP MENU
ENTER
DIRECT NAVIGATOR
FUNCTIONS
MIX
2CH
REC
TEST
MANUAL SKIP
REPEAT
AV
AUXFM/AMDVDHDD
DISPLAY
PRO LOGIC
VIDEO Plus +
SHIFT
DIRECT TV REC
FM MODE
SUB MENU
STATUS
PROG/CHECK
PROG/CHECK
HDD/DVD INPUT
AUDIO
-/--
F
A B C D
Í
3 4 2 1
ENTER
HDD, DVD
F TIMER
REC MODE
¢ CANCEL
PROG/CHECK
VIDEO Plusr
EXT LINK
Numbered
buttons
VIDEO Plus
+
1:58 SP
DVD
30:24 SP
Remain HDD
12:53:00 15. 7. TUE
Enter
VIDEO Plus+
Number by using 0-9 keys.
TIMER
RECORDING
12:54:00 15. 7. TUE
Programme Name
ModeStopStartName Date
PDC
HDD
DVD
20:0019:0015/ 7 TUE SP
OFF HDD
1:58 SP
DVD
30:24 SP
Remain HDD
1 BBC
∫ To release the unit from recording standby
Press [F TIMER].
“F” goes out.
≥Be sure to press [F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if “F” is displayed.
∫ To cancel recording when recording has
already begun
Press [F TIMER].
≥You can also press and hold [∫] on the main unit for more than
3 seconds to stop recording.
[Note]
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even
when playing.
≥Timer recordings do not begin while editing or transferring
(dubbing) in normal speed mode (➡page 39).
≥“F” flashes for about 5 seconds when the unit cannot go to
timer recording standby.
≥
If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording starting
time, the “
F
” flashes on the unit display. In this case, press
[
F
TIMER] to put the unit in the timer recording standby mode.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with HDD or DVD-RAM and approximately 30
seconds when recording with DVD-R).
∫ PDC function (➡page 55)
As long as a PDC signal is being broadcast by the TV station,
even if the broadcast programme time changes, the recording
time automatically changes to match the new broadcast time.
To activate the PDC function
In step 3 in the PDC column, press [3, 4] to select “ON”.
∫ Relief Recording
When the recording drive is set to “DVD” for timer recording and
if the programme will not fit onto the disc, the recording drive will
be altered to the “HDD” automatically.
≥If there is no disc in the tray or the disc cannot be recorded on,
for example by the timer recording function while transferring
(dubbing), the recording drive will automatically revert to the
HDD.
≥The Direct Navigator shows which programmes were relief-
recorded (“ ” is displayed.) (➡ page 27).
≥If the time remaining on the HDD is insufficient, as much of the
programme as possible will be recorded onto the HDD.
≥Relief recording is not activated when recording the programme
with PDC and it is extended so that it no longer fits on the disc.
VIDEO Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from
Gemstar Development Corporation.
SP
OK
20:0019:00BBC 1 15/ 7 TUE01
Mode
Disc
space
StopStartNo. Name Date
TIMER
RECORDING
12:55:00 15. 7. TUE
New Timer Programme
OFF
PDC
HDD
DVD
1:58 SP
DVD
30:24 SP
Remain HDD
Check to make sure
“OK” is displayed
(➡ page 27).
Timer standby is active, only playback is possible.
HT1500_EB.book 25 ページ ２００４年５月２８日 金曜日 午後１時４１分