SC-BTT268_P_eng.book 1 ページ ２０１０年１２月２４日 金曜日 午前１１時１９分 Owner’s Manual Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT268 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
SC-BTT268_P_eng.book 2 ページ ２０１０年１２月１７日 金曜日 午前８時５分 WARNING FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SC-BTT268_P_eng.book 3 ページ ２０１０年１２月１７日 金曜日 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings.
SC-BTT268_P_eng.book 4 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Table of contents IMPORTANT SAFETY INSTRUCTIONS ......... 3 Getting started Radio Accessory......................................................... 5 Control reference guide.................................... 6 Listening to the Radio..................................... 24 •Remote control ................................................................. 6 •Main unit (Front) ...............................................................
SC-BTT268_P_eng.book 5 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Getting started System SC-BTT268 SA-BTT268 Front speakers SB-HF270 Center speaker SB-HC270 Surround speakers Subwoofer SB-HS270 SB-HW270 Playback Main unit Speaker system Getting started ≥ Operations in this Owner’s Manual are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same.
SC-BTT268_P_eng.book 6 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Control reference guide 13 リワヱヶヵ モヷ 1 1 2 2 14 15 3 4 ュリヴヤ ㄊヱㄐㄅ ヴユモンヤラ ヱロモヺ 16 ヴユモンヤラ ヴロヰヸ ヴレリヱ ヴヵヰヱ 6 6 チヤ モ ヴ ヷリユンモ ヵ ヱ ヶ チヮユワ ユワヶ ヱチヮ VQT3M40 18 ラヰヮユ ヵヰヱ 8 ユヹリヵ ノヶ ヰヱ 7 17 ヴレリヱ ヱモヶヴユ 5 Remote control 19 20 ンユヵヶンワ 9 21 10 11 12 22 Turn the unit on and off Select title numbers, etc.
SC-BTT268_P_eng.book 7 ページ ２０１０年１２月１８日 土曜日 午後１時５分 1 2 POWER Getting started Main unit (Front) 3 VOL OPEN/CLOSE Pull open. iPod SD CARD 4 1 2 3 4 5 5 6 7 8 9 10 6 7 8 Start play ( 20) SD card slot ( 18) Remote control signal sensor Distance: Within approx. 7 m (23 ft.) Angle: Approx. 20o up and down, 30o left and right 9 Display 10 Connect iPod/iPhone ( 27) Standby/on switch (POWER Í/I) ( 16) Press to switch the unit from on to standby mode or vice versa.
SC-BTT268_P_eng.
２０１０年１２月１７日 金曜日 午前８時５分 ∫ Finalize ∫ SD card DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions. ≥ miniSD Cards, microSD Cards, microSDHC Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided. ≥ Keep the Memory Card out of reach of children to prevent swallowing.
SC-BTT268_P_eng.book 10 ページ ２０１０年１２月１８日 土曜日 午後１時５分 STEP 1 : Preparing the STEP 2 : Positioning speakers Caution Preparing cables and making connection ∏ 5 Speaker cables (REEX1266A: RED) (REEX1267A: WHITE) (REEX1268: GREEN) (REEX1269: GRAY) (REEX1270: BLUE) 1 How you set up your speakers can affect the bass and the sound field. Use of the speaker cable stickers is convenient when making cable connections. e.g.
SC-BTT268_P_eng.book 11 ページ ２０１０年１２月１７日 金曜日 午前８時５分 STEP 3: Connections Getting started Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. Speaker cable connection Connect to the terminals of the same color.
SC-BTT268_P_eng.book 12 ページ ２０１０年１２月１８日 土曜日 午後１時５分 Connection to a TV ≥ The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize your system setting. ≥ Do not make the video connections through the VCR. Due to copy guard protection, the picture may not be displayed properly. ≥ Turn off all equipment before connection.
SC-BTT268_P_eng.book 13 ページ ２０１０年１２月１８日 土曜日 午後１時５分 ∫ When the HDMI terminal on the TV is labeled “HDMI (ARC)” Getting started Connection for the best picture and audio ≥ When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled “HDMI (ARC)”, you can connect the unit simply with a single HDMI cable. ≥ It is possible to playback 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
SC-BTT268_P_eng.book 14 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Connection with Set Top Box, etc. e.g., TV OPTICAL OUT To enjoy TV audio from this home theater system’s speakers: 1 2 Connect the STB and the main unit with the Optical digital audio cable (not supplied). Select “DIGITAL IN” or “D-IN” as a source ( 18). A Refer to the operating instructions of the respective devices for the optimal connections. B Optical digital audio cable (not supplied) C Set Top Box (Cable/Satellite), etc.
２０１０年１２月１８日 土曜日 Connection to a broadband network The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated ( 17) ≥ You can enjoy BD-Live ( 21) ≥ You can enjoy VIERA CAST ( 29) For details about connection method, refer to the instructions supplied with the connected equipment. 午後１時５分 STEP 4: AC power supply cord connection Getting started SC-BTT268_P_eng.book 15 ページ Connect only after all other connections are complete.
VQT3M40~Body_mst.fm 16 ページ ２０１０年１２月２７日 月曜日 午後６時１８分 STEP 5: Easy setup 1 The Easy setup assists you to make necessary settings. Follow the on-screen prompts to make basic settings for the system. 2 Press [Í]. Setup screen appears. If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit.
２０１０年１２月１７日 金曜日 Network Easy Setting The configuration of your network is about to begin. If you failed to make the settings, refer to “When you experience problems with settings”. When you experience problems with settings Network Easy Setting (Home Network Connection Check) 午前８時５分 ≥ Refer to the operating instructions of the hub or router. ≥ You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu.
SC-BTT268_P_eng.book 18 ページ ２０１０年１２月１８日 土曜日 午後１時５分 Inserting or removing media HOME menu Major functions of this unit can be operated from the HOME menu. Preparation Turn on the television and select the appropriate video input on the television. OPEN/CLOSE VOL 1 2 Press [Í] to turn on the unit. Press [3, 4, 2, 1] to select the item and press [OK]. SD CARD HOME Home theater OK ≥ When inserting a media item, ensure that it is facing the right way up.
２０１０年１２月１７日 金曜日 Enjoying sound effects from all speakers Enjoying surround sound effects 1 Press [SURROUND] several times to select the effect. STANDARD Sound is output as it was recorded/encoded. Speaker output varies depending on the source. MULTI-CHANNEL You can enjoy sound from the front speakers, as well as the surround even when playing a 2-channel sound or non-surround sound. MANUAL 2 ≥ The selected effect will only be displayed on the main unit.
SC-BTT268_P_eng.book 20 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Playing video contents Playback Search/Slow-motion [BD] [DVD] [CD] [SD] Search 1 While playing, press [SEARCH6] or [SEARCH5]. Insert the media. If the menu is displayed, press [OK] or [3, 4, 2, 1] to select the item. ( 18) 2 Press [3, 4] to select the title and press [OK]. When a message screen is displayed while playing back 3D compatible video software, play back in accordance with the instructions.
２０１０年１２月１７日 金曜日 Useful functions 1 2 Press [SUB MENU]. Select an item and press [OK]. While DIRECT NAVIGATOR screen is displayed Properties To display the titles properties (recording date, etc.) View Chapters To select the chapter View Playlists To play playlists View Titles To select the title. 午前８時５分 ∫ Deleting data/Formatting SD cards If you no longer need data recorded on the SD card, you can delete data with the following operation. Insert an SD card. Press [HOME].
SC-BTT268_P_eng.book 22 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Enjoying 3D video You can enjoy powerful 3D videos with realistic sensations by connecting this unit with a High Speed HDMI Cable to a 3D compatible TV. Useful functions 1 While playing, Press [SUB MENU]. 2 Press [3, 4] to select “3D Settings” and press [OK]. 3 Select an item, then press [OK]. Signal Format Original Keep original picture format. Side by side 3D picture format comprising of left and right screens.
２０１０年１２月２４日 金曜日 午前１１時１９分 Playing still pictures [BD] [DVD] [CD] [SD] (BD-RE, DVD-R/R DL, CD-R/RW, SD Card) In order to play back 3D still pictures (MPO), this unit should be connected to a Full HD 3D compatible TV via an HDMI terminal. 1 Useful functions 1 2 Press [SUB MENU]. Select an item, then press [OK]. While Photo View screen is displayed Slideshow Insert the media. If the menu is displayed, press [OK] or [3, 4, 2, 1] to select the item.
SC-BTT268_P_eng.book 24 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Playing music Listening to the Radio Radio [DVD] [CD] (DVD-R/R DL, music CD, CD-R/RW) 1 Presetting stations automatically Insert the media. If the menu is displayed, press [OK] or [3, 4, 2, 1] to select the item. ( 18) 2 Press [3, 4] to select the track and press [OK]. DIRECT NAVIGATOR CD No. 01 02 03 04 05 0.09 Track1 5 Tracks / Total Play Time 20min54sec Music list Track Name Track1 Track2 Track3 Track4 Track5 Up to 30 stations can be set.
SC-BTT268_P_eng.book 25 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Enjoying TV with unit’s speakers Press [RADIO] to select “FM”. Preparation Press the number buttons to select the channel. Turn on your TV and select the appropriate audio input mode [AUX, ARC, D-IN] to suit the connections to this unit. ( 18) To select a 1-digit number e.g., 1: [1] [OK]. To select a 2-digit number e.g., 12: [1] [2]. Alternatively, press [W, X] or [3, 4].
SC-BTT268_P_eng.book 26 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Linked operations with the TV (VIERA Link “HDAVI TM ControlTM”) What is VIERA Link “HDAVI Control”? VIERA LinkTM is a new name for EZ SyncTM. VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.
SC-BTT268_P_eng.book 27 ページ ２０１０年１２月１８日 土曜日 午後１時５分 Using the iPod®/iPhone® Other devices *1 *2 The selection works only when using an ARC compatible TV. “AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the audio link”. Power off link All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off.
SC-BTT268_P_eng.book 28 ページ ２０１０年１２月１８日 土曜日 午後１時５分 iPod/iPhone Playback 1 Preparation ≥ Make sure that the “IPOD” source is selected. Press [iPod] to select the source. ≥ To view photos/videos from the iPod/iPhone Operate the iPod/iPhone menu to make the appropriate photo/video output settings for your TV. ≥ To display the picture, turn on the TV and select the appropriate video input mode. iPod/iPhone 3 Enjoy music/video 1 2 2 Press [iPod] to select “IPOD”.
VQT3M40~Body_mst.fm 29 ページ ２０１０年１２月２４日 金曜日 午後７時５９分 Enjoying VIERA CASTTM Advanced operations 3 4 Press [iPod] to select “IPOD”. Press [STATUS] several times to select “ALL” on the unit’s display. ≥ You can also select "All" by using HOME menu. (> 18) Switch the TV input to video in. Play a slideshow on your iPod/iPhone. The picture will be displayed on your TV. To use the iPod touch/iPhone features 1 Press the Home button on the iPod touch/iPhone.
SC-BTT268_P_eng.book 30 ページ ２０１０年１２月１８日 土曜日 午後１時５分 Playback menu 1 Play Press [DISPLAY]. Repeat Play e.g., BD-Video (Only when the elapsed time is being displayed on the unit’s display.) Select the item which you want to repeat. The items displayed differ depending on the type of media. Disc Play Video Audio Signal Type Subtitle Off - Subtitle Style Menus Items Main 1ENG Angle - Settings 2 Press [3, 4] to select the menu and press [1].
VQT3M40~Body_mst.fm 31 ページ ２０１０年１２月２４日 金曜日 午後７時５９分 Setup menu Audio Movie Sound Effect Select the sound effect of the movie. ≥ Cinema Surround Plus: The function creates the sound of virtual speakers to enhance the realistic surround feeling as if the sound comes from all directions. Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. 1 2 3 Music Sound Effects*1, *2 Select the sound effect of the music.
VQT3M40~Body_mst.fm 32 ページ ２０１０年１２月１７日 金曜日 午前１０時１０分 Subtitle Language Choose the language for the subtitle. ≥ If “Automatic” is selected and the language selected for “Audio Language” is not available, subtitles of that language will automatically appear if available on that disc. ≥ Enter a code (> 40) with the number buttons when you select “Other ¢¢¢¢”. Menu Language Choose the language for the disc menus. ≥ Enter a code (> 40) with the number buttons when you select “Other ¢¢¢¢”.
SC-BTT268_P_eng.book 33 ページ ２０１０年１２月１７日 金曜日 TV / Device Connection 3D Settings Press [OK] to show the following settings 3D Type Select the format of the connected TV. ≥ Change the settings for 3D on the TV also when “Checker board” or “Side by side” is selected. 3D Playback Precautions Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.
SC-BTT268_P_eng.book 34 ページ ２０１０年１２月１８日 土曜日 午後１時５分 Network Network Easy Setting ( Others 17) Remote Control Code Network Settings Change the remote control code, when other Panasonic products react to this remote control. Perform network-related settings individually. Press [OK] to show the following settings: Quick Start* IP Address / DNS Settings This is for checking the state of the network connection and setting the IP address and DNS-related. Press [OK] to show the respective setting.
SC-BTT268_P_eng.book 35 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Speaker settings Adjusting speaker level Delay time For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If either distance A or B is less than C, find the difference in the relevant table and adjust the delay time to make up for the difference. A C C L Volume (Channel balance) ( C 1 LS B Press [3, 4] to adjust the volume of each speaker.
SC-BTT268_P_eng.book 36 ページ ２０１０年１２月２４日 金曜日 午前１１時１９分 Speaker installation option Troubleshooting guide Optional speaker settings Reference Before requesting service, please perform the following steps. Attaching to a wall Do you have the latest firmware installed? You can attach all of the speakers (except subwoofer) to a wall. ≥ The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw.
金曜日 Still pictures (JPEG) do not playback normally. ≥ The images that were edited on the PC, such as Progressive JPEG, etc., may not playback. The TV tuner mode is not displayed when the TV is switched on. ≥ This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to “On”. ≥ Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting. You have forgotten your ratings password.
SC-BTT268_P_eng.book 38 ページ ２０１０年１２月１７日 金曜日 午前８時５分 Sound Radio No sound. Low volume. Distorted sound. Cannot hear the desired audio type. ≥ Check connections to speakers and other equipment. ( 10s15) ≥ Ensure the speaker settings for your speakers are correct. ( 35) ≥ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu.
VQT3M40~Body_mst.fm 39 ページ ２０１０年１２月２４日 金曜日 Messages The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use. On the television 午後８時１分 No PLAY ≥ There is a viewing restriction on a BD-Video or DVD-Video. (> 31) No READ ≥ The media is dirty or badly scratched. The unit cannot play. Cannot play. ≥ You inserted an incompatible disc. (Discs recorded in PAL video, etc.
SC-BTT268_P_eng.
VQT3M40~Body_mst.fm 41 ページ ２０１０年１２月１７日 金曜日 午前１０時１０分 Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.
VQT3M40~Body_mst.fm 42 ページ ２０１０年１２月２７日 月曜日 午前９時５６分 Specifications GENERAL Power consumption: 85 W Power consumption in standby mode: Approx. 0.4 W Power supply: AC 120 V, 60 Hz Dimensions (WkHkD): iPod/iPhone Connector: Dimensions (WkHkD): Mass (Weight): Operating temperature range: Operating humidity range: DC OUT 5 V 1.0 A MAX 430 mmk38 mmk279 mm (1615/16qk11/2qk1031/32q) Approx. 2.
SC-BTT268_P_eng.
SC-BTT268_P_eng.book 44 ページ ２０１０年１２月２４日 金曜日 午前１１時１９分 Index A Audio Changing audio. . . . . . . . . . . . . . . . .20 Language . . . . . . . . . . . . . . . . . .30, 31 B BD-Live. . . . . . . . . . . . . . . . . . . . . . . . . .21 C Chapter. . . . . . . . . . . . . . . . . . . . . . . . . .21 F File format . . . . . . . . . . . . . . . . . . . . . . .40 Firmware update . . . . . . . . . . . . . . . . . .17 I iPod/iPhone . . . . . . . . . . . . . . . . . . . . . .27 L LAN . . . . . . . . . . . . . . . .
