Operating instructions

8
RQT7635
Erasure preventionA
Recording the radio
Erasure preventionA
Use normal position/TYPE
I
tape only.
Follow steps 1 to 3.
In step 1: Set [SELECTOR] to “RADIO” and tune to the station. ( page 6)
In step 2: Insert the tape inside with the side to be recorded facing out and
close by hand.
In step 3: [ PLAY] is also depressed with [ REC].
Recording stops and the button is released when the front side finishes.
To stop recording
Press [ STOP/EJECT].
To pause recording
Press [ PAUSE].
To resume recording, press [ PAUSE] again.
• Changes to volume and tone will not affect the recording.
• Wind up the leader tape before recording.
• When recording MW, set [FM MODE/BP] to the position where
there is less noise.
• Use the AC power supply cord or insert fresh batteries.
Break out the tab.
Cover the tab with adhesive tape when you want to use the tape for
recording again.
Recording tips
Side A
Tab for Side B
Tab for Side A
RX-CS40_RQT7635 04.2.6 10:30 ページ 8