Operating instructions

VQT2M20
16
STOP
Recording indicator
•
A-B / MENU
FOLDER/SPEED
VAS (Voice Activated System) function
Recording stops automatically when silence
continues for about 3 seconds. If the unit
detects sound, the recording resumes.
Start recording to activate this function.
When the VAS function is active and the
recording is paused during recording, “ ”
and the recording indicator blink.
Cancelling VAS function:
Select “ ” and enter in step
3
.
* Turn the function off when recording
important matters.
* Press
STOP
to stop the setting process midway.
1
2
Press +, – to select “ ” and
press
q
/
g
to enter.
Press and hold
•
A-B / MENU
for 1
second or longer.
“ ” (blinking) is displayed.
• Press
STOP
to stop the unit.
Preventing unnecessary recording (VAS)/Confirming possible (remaining) recording time
The “ ” display while
stopped shows approximate
remaining memory.
“ ” lights up in response to
the remaining time.
When there is only a little
∗
remaining
memory left, “ ” blinks.
∗ When the remaining recording time falls
below approx. 1 hour.
Press
u
,
i
to select “ ” and
press
q
/
g
to enter.
Then “ ” is displayed.
3
Confirming possible
(remaining) recording time
Press and hold
FOLDER/SPEED
for 1 second or
longer while recording
or stopped.
Possible recording time is
displayed for approx. 3 seconds.
When there is only a little
∗
remaining memory
left while recording, the display is automatically
changed to the remaining recording time
display.
Possible
recording time
hour minute
second
1
4475'A'P836/AKPFF4475'A'P836/AKPFF ඦᓟඦᓟ