Operating Instructions Digital Wireless Stereo Earphones Model No.
Accessories Dear customer Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Please check and identify the supplied accessories. 1 USB charging cord 1 Earpieces set (L, S) Table of contents Before use Accessories .............................................................................................................. 2 Safety precautions ..................................................................
Safety precautions ■■Unit •• Avoid using or placing this unit near sources of heat. •• Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites. •• Do not block the ventilation of this unit with items such as cloth for long periods of time while charging or while the power is on.
Charging Part names Left Right 2 The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Remote controller 1 1 Connect this unit to a computer using the USB charging cord 6 7 4 9 10 11 3 5 8 1 2 3 4 Earphone Earpiece Remote controller LED indicator light* • The number of blinks or color notifies the status of the unit.
Turning the power on/off Connecting a Bluetooth® device 1 In the power-off state, press and hold the Preparation power of this unit for approx. 3 seconds until the LED (blue) blinks LED •• A beep will sound, and the LED (blue) on the remote controller will blink slowly. To turn the power off for approximately 3 seconds. •• Press and hold A beep will sound and the power will be turned off. ■■Note •• Place the Bluetooth® device within approx. 1 m from the unit.
Listening to music Connecting a paired Bluetooth device ® on the unit 1 Turn • Press and hold the power button of this unit for approx. 3 seconds until the LED (blue) blinks. • A beep will sound, and the LED (blue) will blink slowly. 2 If the Bluetooth® compatible device supports the “A2DP” and “AVRCP” Bluetooth® profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
Making a phone call With Bluetooth® enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth® profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication using the microphone on the unit. • HFP (Hands-Free Profile): In addition to the HSP functions, this profile has the incoming and outgoing calls function.
Maintenance Clean this unit with a dry and soft cloth. • Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off. Keeping the battery performance About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ■ Frequency band used This unit uses the 2.4 GHz frequency band.
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. General The unit does not respond • Push button for 10 seconds. The unit will be reset. (The pairing device information will not be deleted.) Power supply and charging Cannot charge the unit • Make sure the computer is turned on and is not on standby or sleep mode.
Specifications ■ General Power supply DC 5 V, 0.6 W (Internal battery: 3.7 V (Li-polymer 90 mAh)) Operating time*1 Approx. 4 hours 20 minutes Charging time*2 (25 ºC) Approx. 90 minutes Charging temperature range 10 ºC to 35 ºC Operating temperature range 0 ºC to 40 ºC Operating humidity range 35%RH to 80%RH (no condensation) Mass Approx. 13 g *1 It may be shorter depending on the operating conditions. *2 Time taken to recharge from empty to full.
To remove the battery when disposing of this unit 1 2 The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. When disposing of this unit, take out the battery installed in this unit and recycle it. Danger As the rechargeable battery is specifically for this product, do not use it for any other device. Do not charge the removed battery. • Do not heat or expose to flame.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.