Operating Instructions Digital Wireless Stereo Headphones Model No. RP-HD305B Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use.
Safety precautions ∫ Unit WARNING: To reduce the risk of fire, electric shock or product damage, • Do not expose this unit to rain, moisture, dripping or splashing. • Do not place objects filled with liquids, such as vases, on this unit. • Use the recommended accessories. • Do not remove covers. • Do not repair this unit by yourself. Refer servicing to qualified service personnel. Avoid the use in the following conditions • High or low extreme temperatures during use, storage or transportation.
About Bluetooth® Panasonic bears no responsibility for data and/or information that is compromised during a wireless transmission. ∫ Frequency band used This unit uses the 2.4 GHz frequency band. ∫ Certification of this unit • This unit conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. • The actions below are punishable by law in some countries: – Taking apart/modifying this unit. – Removing specification indications.
Table of contents Safety precautions ...................................................................................................................................... 2 About Bluetooth® ......................................................................................................................................... 3 Before use Accessories .................................................................................................................................................
Before use Expressions used in this document • Pages to be referred to are indicated as “l ±±”. • The product illustrations may differ from the actual product. Accessories Please check and identify the supplied accessories. 1 x USB charging cord 1 x Detachable cord Maintenance Clean this unit with a dry and soft cloth. • Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be deformed or the coating to come off.
Before use Part names 1 Right (R) side 2 3 4 5 10 6 7 8 9 11 1 2 3 4 5 6 Audio input terminal [SOUND] button [i] button [1/;/ ] button [j] button Charging terminal (DC IN) 7 8 9 10 11 Power/pairing LED*1 [Í/I ( )] button*2 Microphone Ear pads Raised dot indicating the left side • Connect the USB charging cord (supplied) to this terminal when charging.
Preparation Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer using the USB charging cord. A: Power/pairing LED B: USB charging cord (supplied) • Check the direction of the terminals and plug in/out straight holding onto the plug. (It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in wrong direction.
Preparation Connecting a Bluetooth® device Preparation • Place the Bluetooth® device within approx. 1 m from the unit. • Check the device operation using its operation instructions as required. Pairing (Registration) this unit with the Bluetooth® device for connection 1 In the power-off state, press and hold [Í/I ( )] of this unit until the power/pairing LED blinks. When pairing a device for the first time: approx. 3 seconds When pairing a second or subsequent devices: approx.
Preparation Connecting a paired Bluetooth® device 1 Turn on this unit. • Press and hold [Í/I ( )] of this unit for approx. 3 seconds until the power/pairing LED (blue) blinks. • A beep will sound, and the power/pairing LED (blue) will blink slowly. 2 Perform steps 2 and 3 of “Pairing (Registration) this unit with the Bluetooth® device for connection”. (l 8) • When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.
Operation Listening to music If the Bluetooth® compatible device supports the “A2DP” and “AVRCP” Bluetooth® profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit. • AVRCP (Audio/Video Remote Control Profile): Allows remote control of the device using the unit. 1 Connect the Bluetooth® device and the unit. (l 8, “Connecting a Bluetooth® device”) 2 Select and play the music on the Bluetooth® device.
Operation Selecting the sound mode This changes the sound quality of the music or video being played back. Press the [SOUND] button on this unit. • Each press of this button changes the sound quality. Clear Voice ↓ Bass Enhancer ↓ – Bass Enhancer : Produces a more dynamic sound effect with enhanced bass. – Clear Voice : Produces a sound effect which makes human voices, such as vocals and dialogues, clear to listen to. – OFF : Turns off sound effects.
Operation Making a phone call With Bluetooth® enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth® profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication using the microphone on the unit. • HFP (Hands-Free Profile): In addition to the HSP functions, this profile has the incoming and outgoing calls function.
Operation Useful functions Activating voice functions You can use a button on this unit to activate Siri or other voice functions on your smartphone or similar device. 1 Connect the Bluetooth® device and the unit. (l 8, “Connecting a Bluetooth® device”) 2 Press and hold [1/;/ ] on this unit until the voice function is activated. Note • For details about voice function commands, refer to the operating instructions for the Bluetooth® device.
Operation Using the detachable cord (supplied) While the power is turned off or the battery has no remaining charge, this unit can be used as normal headphones by connecting the detachable cord (supplied). • Before connecting the detachable cord (supplied), lower the volume on the connected device. • If you connect the detachable cord (supplied) when connected via Bluetooth®, the power will turn off. • Noise may occur due to dirt on the plug. Clean the plug with a soft dry cloth if this occurs.
Other Restoring to the factory settings When you want to delete all pairing device information, etc., you can restore the unit to the factory settings (original settings upon purchase). Charge the battery before restoring the unit. 1 While the power is turned off, press and hold [Í/I ( )] for at least 5 seconds until the power/pairing LED lights alternately in blue and red. 2 While the power/pairing LED is lighting alternately in blue and red, press [i] and [j] at the same time for at least 5 seconds.
Other Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated do not solve the problem, consult your dealer for instructions. Sound and audio volume No sound. • Make sure that the unit and the Bluetooth® device are connected correctly. (l 8) • Check if music is playing on the Bluetooth® device. • Make sure that the unit is turned on and the volume is not set too low.
Other General The unit does not respond. • This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using the USB charging cord. (l 14) • The power cannot be turned on when the detachable cord (supplied) is connected. Power supply and charging Cannot charge the unit. / The power/pairing LED does not light during charging. / Charging takes longer.
Other Specifications ∫ General Power supply DC 5 V, 500 mA (Internal battery: 3.7 V (Li-polymer)) Operating time*1 Approx. 24 hours (SBC) Charging time*2 (25 oC) Approx. 5 hours Charging temperature range 10 oC to 35 oC Operating temperature range 0 oC to 40 oC Operating humidity range 35 %RH to 80 %RH (no condensation) Mass Approx. 218 g (without cord) *1 It may be shorter depending on the operating conditions. *2 The time required to charge the battery from empty to full.
Other To remove the battery when disposing of this unit The following instructions are not intended for repairing purposes but for the disposal of this unit. This unit is not restorable once disassembled. • When disposing of this unit, take out the battery installed in this unit and recycle it. • Disassemble after the battery runs out. • Keep disassembled parts out of reach of children. Regarding the handling of used batteries • Insulate the terminals with adhesive tape or similar material.
Other Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.
Other Suomi ∫ Varotoimet turvallisuuden takaamiseksi VAROITUS: Jotta vähennetään tulipalon, sähköiskun tai tuotteen vahingoittumisen vaaraa, • Älä anna tämän laitteen altistua sateelle, kosteudelle, pisaroille tai roiskeille. • Älä laita laitteen päälle mitään nesteitä sisältäviä esineitä kuten maljakot. • Käytä suositeltuja varusteita. • Älä poista suojuksia. • Älä korjaa tätä laitetta itse. Anna huoltopalvelut tehtäväksi pätevälle huoltohenkilöstölle.
Sales and Support Information Customer Communications Centre • For customers within the UK: 0344 844 3899 • For customers within Ireland: 01 289 8333 • Monday–Friday 9:00 am–5:00 pm (Excluding public holidays). • For further support on your product, please visit our website: www.panasonic.co.uk Direct Sales at Panasonic UK • Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre Monday–Friday 9:00 am–5:00 pm (Excluding public holidays).
