Manual

You can copy all of the images stored on a
Disk Media to another Disk Media using
this operation.
1
--Before you begin
Set the POWER Switch to PLAY. (See
pages 19~20.)
2
23
4
3
Press • or • to select COPY.
<PLAY MENU 1/2> /
t
DISPLAY MOOE NORMAL
DELETE
E)_IT : MENU •
AUDIO ON
PRINT MARK
SEL :AV SET :<l_
Press • to display COPY menu and
select COPY ALL.
SEL : AV SET :<•
EXIT : M_NU
Press • to display COPY ALL menu
and press • or • to select YES.
<COPY ALL>
COPY ALL PAGES
OK?
NO
SEL : Av
ENILR : SHTR
• Select NO to return to the COPY
MENU.
Press SHTR to copy.
PLEASE WAIT
• When copying images from one disk to
another, the images are temporarily stored in
camera memory before being copied to the
target disk. As the camera memory is only
equal to about one Floppy Disk, all the
SuperDisk Diskette images cannot be stored
and COPY ALL cannot be used. If COPY ALL
is selected when SuperDisk is the source,
"CANNOT COPY ALLTHE SUPERDISK" will
be displayed.
• Ifthe memory capacity of the SuperDisk
Diskette or Floppy Disk that you want to copy
to is not sufficient, the following message will
appear.
Nor AVAlULO Le C4SK _OT ENOUGH _SK S_'UCe
coe_n_ue: e_nR co--u==: S_rR
EXIT : MeN_ exrr : NENU
• You can copy images from a Floppy Disk to
another Floppy Disk or a SuperDisk Diskette
providing the TARGET disk has enough
space.
• "PLEASE WAIT", then "PLEASE
CHANGE DISK" is displayed. After
Disk is changed, "PLEASE WAIT" is
displayed as all of the images are
copied. When copying is complete,
the screen below will be displayed.
1
COPYING IS COMPLETE ]
J
• Press MENU twice to exit.
important:
• While "PLEASE WAIT" is displayed, do
not turn off the Digital Camera or
unplug the AC Adaptor (supplied)
because this will cause irreversible
damage to the memory, resulting in
reduced image storage capacity.
43