LSQT1091_ENG.book 1 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Operating Instructions Digital Video Camcorder Model No. PV-GS320 Before connecting, operating or adjusting this product, please read the instructions completely. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. Mini For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www.
LSQT1091_ENG.book 2 ページ ２００６年１１月２７日 Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your Camcorder. Be sure to retain this manual as your convenient Camcorder information source.
LSQT1091_ENG.book 3 ページ ２００６年１１月２７日 月曜日 午後１時１７分 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LSQT1091_ENG.book 4 ページ ２００６年１１月２７日 月曜日 午後１時１７分 IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
LSQT1091_ENG.book 5 ページ ２００６年１１月２７日 Precautions USE & LOCATION WARNING ≥ TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee.
LSQT1091_ENG.book 6 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Warning Risk of fire, explosion and burns. Do not disassemble. Do not heat the batteries above the following temperatures or incinerate. Button-type battery 60 oC (140 oF) Battery pack 60 oC (140 oF) AC adaptor This AC adaptor operates on AC between 110V and 240 V. But ≥In the U.S.A. and Canada, the AC adaptor must be connected to a 120V AC power supply only. ≥When connecting to an AC supply outside of the U.S.A.
LSQT1091_ENG.book 7 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before opening the CD-ROM package, please read the following. End User License Agreement (for USB Driver, Quick Movie Magic and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
LSQT1091_ENG.book 8 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Contents Before using Quick Guide ................................................... Accessories ................................................... Parts identification and handling.................... Attaching the lens cap ................................... How to remove the Sensor tag (for U.S.A. only)........................................... The grip belt................................................... Power supply .............................
LSQT1091_ENG.book 9 ページ ２００６年１１月２７日 Playback mode Playing back tape .......................................... Slow-motion playback/ frame-by-frame playback ............................ Variable-speed search function ..................... Playback on TV.............................................. Playing back card .......................................... Deleting files recorded on a card ................... Formatting a card........................................... Protecting files on a card .......
LSQT1091_ENG.book 10 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 3 Push the [PUSH] mark 1 in order to close Quick Guide the cassette holder. ª Charging the battery 1 Connect the AC cable to the AC adaptor and the AC jack. 2 Put the battery on the battery mount by aligning the mark and then securely plug it in. 1 PUSH 4 Only after the cassette holder is completely housed, close the cassette cover. ª Inserting/removing a card 1 Open the card slot cover.
LSQT1091_ENG.book 11 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª How to turn off the power 1 While pressing the button 1, set the [OFF/ 1 Press the Photoshot button [ ]. ON] switch to [OFF]. 1 OFF ON ª Recording on a tape ≥Set to Tape Recording Mode. 1 Press the recording start/stop button to start recording. 2 Press the recording start/stop button again to pause recording. ª Playing back tape ≥Set to Tape Playback Mode. 1 Operate with joystick.
LSQT1091_ENG.book 12 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Parts identification and handling Before using Accessories ª Camcorder The following are the accessories supplied with this product.
LSQT1091_ENG.book 13 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using (8) (9) (10) (11) (12) (14) (15) (16) (17) (18) (19) (20) (22) (21) (23) (25) (13) (8) Viewfinder -18-, -75- Due to limitations in LCD production technology, there may be some tiny bright or dark spots on the Viewfinder screen. However, this is not a malfunction and does not affect the recorded picture. (9) USB terminal [ ] -50-, -52(10) DC input terminal [DC/C.C.
LSQT1091_ENG.book 14 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ≥When you remove the lens cap, press the knobs firmly. How to remove the Sensor tag (for U.S.A. only) 1 Flip the grip belt. (32) (32) Tripod receptacle This is a hole for attaching the Camcorder to optional tripod. (Please carefully read the operating instructions for how to attach the tripod to the Camcorder.) ≥You cannot open the card slot cover when the tripod is used. Insert the card first and then attach the tripod.
LSQT1091_ENG.book 15 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Power supply ª Charging the battery When this product is purchased, the battery is not charged. Charge the battery before using this product. ≥Battery charging time. (-16-) ≥We recommend using Panasonic batteries. (-12-, -79-) ≥If you use other batteries, we cannot guarantee the quality of this product. ≥If the DC cable is connected to the AC adaptor, then the battery will not get charged. Remove the DC cable from the AC adaptor.
LSQT1091_ENG.book 16 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ≥Hold the battery with your hand so it does not fall. ≥Before removing the battery, be sure to set the [OFF/ON] switch to [OFF]. Charging time and recordable time The times shown in the tables below are for when the temperature is 25 oC (77 oF) and the humidity is 60%. If the temperature is higher or lower than 25 oC (77 oF), the charging time will become longer. Supplied battery/ CGR-DU06 (7.2 V/ 640 mAh) CGA-DU12 (7.
LSQT1091_ENG.book 17 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª How to turn the power on and off with the LCD monitor/viewfinder When the power switch is set to [ON], the power can be turned on and off with the LCD monitor and the viewfinder when the unit is in Tape Recording Mode or Card Recording Mode. OFF Setting date and time When the Camcorder is turned on for the first time, [SET DATE AND TIME] will appear.
LSQT1091_ENG.book 18 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Using the LCD monitor Using the viewfinder You can record the image while viewing it on the opened LCD monitor. 1 Pull the LCD monitor out in the direction of the arrow. ª Extending the viewfinder 1 Pull out the viewfinder and extend it by pinching the extension knob. ≥It can open up to 90o. 2 Adjust the angle of the LCD monitor according to your preference. ≥The viewfinder will be activated.
LSQT1091_ENG.book 19 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Quick Start When Quick Start is ON the battery power is still being consumed, even when the LCD Monitor and the Viewfinder are closed. The Camcorder will resume recording/pause mode about 1.7 seconds after the LCD Monitor and the Viewfinder are reopened. ≥Please note in Quick Start Mode approximately half the pause recording power is being consumed. Using Quick Start Mode will reduce the battery recording/playback time.
LSQT1091_ENG.book 20 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Inserting/removing a cassette 1 Fit the AC adaptor or the battery and turn on the power. 2 Slide the [OPEN/EJECT] lever and open the cassette cover. OPEN/ EJECT condensation may be formed on the heads or the cassette tape. (-72-) ª When the cassette holder does not come out ≥Close the cassette cover completely and then open it again completely. ≥Check if the battery has run down.
LSQT1091_ENG.book 21 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 3 Insert/remove the card into/from the card slot. 1 ≥When inserting a card, face the label side 1 towards you and push it straight in with one stroke as far as it goes. ≥When removing the card, press the center of the card and then pull it straight out. 4 Securely close the card slot cover. ª Concerning the card ≥Do not format the card with another Camcorder or any personal computer. This operation may make the card unusable.
LSQT1091_ENG.book 22 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using How to use the joystick ª Basic joystick operations Operations on the menu screen and selection of files to be played back on the multi-image display Move the joystick up, down, left or right to select an item or file and then push in the center to set it. 2) Tape recording mode ([AUTO/MANUAL/FOCUS] switch is set to [MANUAL]) 1 3 5 4 2 2 1 1 Select by moving up. 2 Select by moving down. 2 3 Select by moving left.
LSQT1091_ENG.book 23 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 4) Card recording mode ([AUTO/MANUAL/FOCUS] switch is set to [AUTO]) 2 1/2 3 1 2 2/2 1 Self-timer recording Backlight compensation Help mode Soft skin mode Tele macro Help mode Select an icon for an explanation of the function. ≥Set to Tape/Card Recording Mode. 1 Press the joystick to display the icon during the recording pause. Move the joystick down until icon 1 appears.
LSQT1091_ENG.book 24 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using 5 Move the joystick right or press it to set the Switching the language You can switch the language on the screen display or the menu screen. 1 Set [LANGUAGE] >> select the desired language. selection. 6 Move the joystick up or down in order to select the item to be set. Using the menu screen For each individual menu, please refer to -63-. 1 Press the [MENU] button. 7 Press the joystick to determine the setting.
LSQT1091_ENG.book 25 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using ª Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the [MENU] button. Adjusting LCD monitor/viewfinder ª Adjusting the brightness and color level 1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES]. 2 Select a menu item. ≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit.
LSQT1091_ENG.book 26 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Using the remote control (10) (14) ª Remote control Using the remote control supplied will enable control of almost all functions of this Camcorder.
LSQT1091_ENG.book 27 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Before using Replace battery with Panasonic PART NO. CR2025 only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep away from children. Do not recharge, disassemble or dispose of in fire.
LSQT1091_ENG.book 28 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Record mode Check before recording Check the following before recording important events such as weddings or when the Camcorder has not been used for a long time. Conduct a test recording to make sure that the image recording and the audio recording work properly.
LSQT1091_ENG.book 29 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Recording on a tape Remove the lens cap. (-14-) (When the Camcorder is turned on with the lens cap attached, the automatic white balance adjustment may not function properly. Please turn the Camcorder on after removing the lens cap.) When this unit is purchased, the aspect ratio is set to [16:9] for recording images compatible with a wide-screen TV.
LSQT1091_ENG.book 30 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ≥When connected with the USB cable or the DV cable to a personal computer or other equipment ≥When in PC Connection Mode ª Stopping blank search midway through Move the joystick down to select the [∫] icon. Recording check The last image recorded is played back for 2 to 3 seconds. After checking, the Camcorder will be set to a recording pause. ≥ Set to Tape Recording Mode. 1 Press the joystick to display the icon during the recording pause.
LSQT1091_ENG.book 31 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ASPECT [4:3]: 1 M : 1280k960 0.3M : 640k480 Recording still pictures onto a card (Photoshot) ≥ Set to Card Recording Mode. 1 Press the Photoshot button [ ] halfway in order to adjust focusing. (For auto focusing only) ≥If you set [O.I.S.] to [ON], then the image stabilizer function will be more effective. ([ MEGA (MEGA Optical image stabilizer)] will be indicated.
LSQT1091_ENG.book 32 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode 3.1M : 2M : 1M : 0.3M : 2048k1512 1600k1200 1280k960 640k480 ≥When you purchase this unit, [ASPECT] is set to [16:9]. The sides of pictures recorded when [16:9] is set may be cut at printing. Check before printing. Zoom in/out function You can zoom in up to 10k optically. ≥Set to Tape/Card Recording Mode. 1 Wide-angle recording (zoom out): Push the [W/T] lever towards [W]. Close-up recording (zoom in): Push the [W/T] lever towards [T].
LSQT1091_ENG.book 33 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ª Digital zoom function If the zoom magnification exceeds 10 times, then the digital zoom function will be activated. The digital zoom function allows you to select a magnification from 25k to 700k. ≥Set to Tape Recording Mode. 1 Set [ADVANCED] >> [D.ZOOM] >> [25k] or [700k].
LSQT1091_ENG.book 34 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode MagicPix function Soft skin mode This function allows you to record color subjects in dark locations to stand out against the background. Attach the Camcorder to a tripod and you can record images free from vibration. ≥Recorded scene is seen as if frames were missed. ≥ Set to Tape Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears. 2 Move the joystick up to select the MagicPix icon [ ].
LSQT1091_ENG.book 35 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Tele macro function Fade in/fade out function By focusing only on the subject and blurring the background, the image can be impressive. This Camcorder can focus on the subject at a distance of approx. 50 cm (20 inches). ≥ Set to Tape/Card Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears. 2 Move the joystick right to select the tele-macro icon [ ].
LSQT1091_ENG.book 36 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ª To select the color for fade in/fade out The color which appears in fading pictures can be selected. 1 Set [ADVANCED] >> [FADE COLOR] >> [BLACK] or [WHITE]. ≥While the fade in/fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.
LSQT1091_ENG.book 37 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Self-timer recording Wide/4:3 function You can record still pictures on a card using the timer. ≥Set to Card Recording Mode. 1 Press the joystick to display the icon. Move the joystick down until icon 1 appears. 2 Move the joystick left to select the self-timer recording icon [ ]. This allows you to record images compatible with wide-screen TVs. Wide Function Images are recorded with a 16:9 aspect ratio.
LSQT1091_ENG.book 38 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Optical image stabilizer function This feature reduces the jitter caused by hand movement when recording. ≥ Set to Tape/Card Recording Mode. 1 Set [ADVANCED] >> [O.I.S.] >> [ON]. Recording in various situations (Scene mode) When you record images in different situations, this mode automatically sets optimum shutter speeds and apertures. ≥ Set to Tape/Card Recording Mode. 1 Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL].
LSQT1091_ENG.book 39 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ª To cancel the scene mode function Set [BASIC] >> [SCENE MODE] >> [OFF] or set the [AUTO/MANUAL/FOCUS] switch to [AUTO]. Sports mode ≥This mode reduces Camcorder shakes for slow-motion playback or playback pause of recorded pictures. ≥During normal playback, the image movement may not look smooth. ≥Avoid recording under fluorescent light, mercury light or sodium light because the color and brightness of the playback image may change.
LSQT1091_ENG.book 40 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode ª To set the white balance manually Select [ ] in Step 3. Then, while viewing a white subject on the entire screen, move the joystick up to select the [ ] indication. ª About flashing of the [ ] indication When the manual adjustment mode is selected ≥Flashing indicates that the white balance previously adjusted is stored. This setting is stored until the white balance is adjusted again.
LSQT1091_ENG.book 41 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Record mode Manual shutter speed/aperture adjustment Shutter Speed Adjust it when recording fast-moving subjects. Aperture Adjust it when the screen is too bright or too dark. ≥ Set to Tape/Card Recording Mode. 1 Set the [AUTO/MANUAL/FOCUS] switch to [MANUAL]. 2 Move the joystick left or right to select aperture icon [ [ ].
LSQT1091_ENG.book 42 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode Playback mode Playing back tape ≥Set to Tape Playback Mode. (An operation icon automatically appears on the LCD monitor.) ª To adjust volume Adjust the speaker volume for playback. 1 Move the [s /VOLr] lever to adjust the volume. VOL 1 Operate with joystick. 1/;: Playback/Pause 6: Rewind/Review playback (Reverts to playback with the 1/; icon.) 5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.
LSQT1091_ENG.book 43 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode Slow-motion playback/ frame-by-frame playback ≥ Set to Tape Playback Mode. (Slow-motion playback can only be performed by using the remote control.) Slow-motion playback If the image is recorded in the SP mode, then it will be played back at a speed approx.1/5 the normal speed. If the image is recorded in the LP mode, then it will be played back at a speed approx.1/3 the normal speed.
LSQT1091_ENG.book 44 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode Playback on TV ª To display the on-screen information Images recorded by this Camcorder can be played back on a TV. ≥ Insert a recorded tape or card into this Camcorder. ≥Be sure that the power of the unit is turned off before connecting it to a TV 1 Connect the Camcorder and a TV. The information displayed on the LCD monitor or the viewfinder (operation icon, time code and mode indication, etc.) can be displayed on the TV.
LSQT1091_ENG.book 45 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode “UNPLAYABLE CARD’’ indication may appear as warning. ≥When playing back still pictures recorded in 4:3 mode ([ 3.1M ], [ 2 M ], [ 1 M ], [ 0.3M ]) on a widescreen TV, the picture quality may deteriorate. ≥When playing back a file recorded on other equipment, the date and time display is different from when it was recorded. ª To display multiple playback files Multiple files on the card (6 files on 1 screen) are displayed.
LSQT1091_ENG.book 46 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Playback mode ª Deleting still picture files recorded on a card by other equipment ≥A still picture file (other than JPEG) that cannot be played back on the Camcorder may be deleted. Note: To delete multiple files on the SD Card (selected files) connect to a PC and use the SD Drive feature. Formatting a card Please be aware that if a card is formatted, then all the data recorded on the card will be erased.
LSQT1091_ENG.book 47 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Edit mode Edit mode Recording from a tape onto a card Still pictures can be recorded on a memory card from scenes that have already been recorded on a cassette. ≥Set to Tape Playback Mode. ≥Insert a tape which already has recorded contents and a card. 1 Start playback. Copying onto a DVD recorder or a VCR (Dubbing) Pictures recorded by the Camcorder can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder.
LSQT1091_ENG.book 48 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Edit mode ≥If you record (dub) images onto another video device and then play them back on a widescreen TV, the images may be stretched vertically. In this case, refer to the operating instructions for the device that you are recording (dubbing) to or read the operating instructions for the TV and set to 16:9 (full). ≥For more information, refer to the operating instructions for your TV set and recorder.
LSQT1091_ENG.book 49 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Edit mode ª To cancel the standby for recording When the Camcorder is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control. ≥Do not plug or unplug the DV cable during dubbing or the dubbing may not be completed properly. ≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback.
LSQT1091_ENG.book 50 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Edit mode ª Before recording with audio dubbing ≥Set to Tape Recording Mode. ≥When you want to preserve the original sound taken during recording, set [ADVANCED] >> [AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.) ≥Set [BASIC] >> [REC SPEED] >> [SP] to take pictures.
LSQT1091_ENG.book 51 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Edit mode 3 Move the joystick left and right to select a desired picture and then press it. cancel this setting. (Refer to the operating instructions of the printer for details.) ≥If your photos are sent to a professional photo printing service, please request that they are printed in their original aspect ratio. ≥Connect the printer directly to this unit. Do not use a USB hub. 4 Select the desired number of prints. ≥You can set up to 9 prints.
LSQT1091_ENG.book 52 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC With a PC Check before Use Available software and required drivers vary depending on the OS of the personal computer. Check the required software and drivers with the table described below and then install them from the CD-ROM. Supplied CD-ROM is available for Windows only.
LSQT1091_ENG.book 53 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC ≥MotionDV STUDIO -57-: Using the MotionDV STUDIO software allows you to capture video recorded on a tape or images viewed through the lens of a Camcorder. Connecting the Camcorder with the DV cable also allows you to output images edited on the personal computer to the tape in the Camcorder. 4 Follow the instructions on the computer screen until the installation is complete. ≥Setup window will disappear when the installation is complete.
LSQT1091_ENG.book 54 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC Using as a Web camera If the Camcorder is connected to your personal computer, you can send video and sound from the Camcorder to other parties via the network. Note: ≥Do not connect the USB cable until the USB Driver is installed.
LSQT1091_ENG.book 55 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC 3 Set [ADVANCED] >> [USB FUNCTION] >> [WEB CAM]. ≥To send pictures recorded on a tape to another personal computer using Windows Live Messenger/Windows Messenger/MSN Messenger, set [BASIC] >> [USB FUNCTION] >> [WEB CAM] on Tape Playback Mode before connecting the Camcorder to your personal computer.
LSQT1091_ENG.book 56 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC 5 After the setup is completed, sign in and start Windows Messenger. ≥Windows Messenger is activated. 6 Select the microphone attached to the PC in the [Microphone] menu. 7 Click [Web Camera Settings...] in the [Tools] menu. 8 Confirm that the [Panasonic DVC Web Camera Device] is selected. In the case of MSN Messenger 7.5/ Windows Live Messenger 8.0 1 Type in your E-mail address and password. 6 Click on [Audio Tuning Wizard...
LSQT1091_ENG.book 57 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC Using Quick Movie Magic or MotionDV STUDIO When the OS is Windows 2000/XP, the Camcorder can be connected to the personal computer with the DV cable. When the OS is Windows 2000/XP, the Camcorder can be connected to the personal computer with the USB cable. However, when the OS is Windows 2000, USB driver must be installed. ≥Do not connect the USB cable until the USB driver is installed.
LSQT1091_ENG.book 58 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC ª Installation of Quick Movie Magic/ MotionDV STUDIO 1 Insert the supplied CD-ROM into the personal computer’s CD-ROM drive. ≥Quit all applications. ≥[Setup Menu] appears. 2 Click the [Quick Movie Magic]/ [MotionDV STUDIO]. 3 Click [Next]. ≥After reading the displayed contents, please carry out the installation according to instructions. 4 Select the Video system. 5 After the completion of setup, click on [Finish].
LSQT1091_ENG.book 59 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC ≥The indication [Enhanced Host Controller] is changed as [EHCI] depending on the host controller you use. 4 Click [Driver] tab to check the description on [Driver Provider]. ≥If [Microsoft] is displayed on [Driver Provider], the confirmation procedure is completed. 4 Click [Standard Universal PCI to USB Host Controller] and then click [Next]. 5 Click [Finish]. ≥The update of the driver is completed. Connect the Camcorder.
LSQT1091_ENG.book 60 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC With DV cable (optional) OS: Windows 2000/XP 1 Set the Mode Dial to Tape Recording Mode or Tape Playback Mode. 2 Connect the Camcorder to the personal computer with DV cable. 4 Using a drag-and-drop operation, move the pictures you want to acquire or the folder storing those pictures to any different folder on the personal computer.
LSQT1091_ENG.book 61 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC ≥When Camcorder power is turned OFF. OFF ON ≥When Mode Dial is turned to change modes. When using on Macintosh Drag the [NO_NAME] or [Untitled] disk icon to the [Trash] and then disconnect the USB cable. If you no longer need software or driver (Uninstall) 1 Select [start] (>> [Settings]) >> [Control Panel], select the software or the driver from [Add/Remove Programs] to uninstall. ≥Uninstalling steps may vary depending on the OS.
LSQT1091_ENG.book 62 ページ ２００６年１１月２７日 月曜日 午後１時１７分 With a PC ≥If you install the USB driver while the USB cable is connected or if you do not follow these Operating Instructions, the Camcorder will not be recognized correctly. In this case, delete the driver from [Device Manager] as described below, uninstall the driver and re-install it.
LSQT1091_ENG.book 63 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Menu Menu ª [TAPE PLAYBACK MENU] Menu list Menu figures and illustrations are provided for easy-to-understand explanations and so they are different from the actual menu indications. ª [TAPE RECORDING MENU] 1) [BASIC] [SCENE MODE] -38[REC SPEED] -28[WIND CUT] -36[ASPECT] -37[CLOCK SET] -172) [ADVANCED] [PICT.QUALITY] -32[PICTURE SIZE] -30[O.I.S.] -38[GUIDE LINES] -38[FADE COLOR] -36[AUDIO REC] -65[USB FUNCTION] -55[D.
LSQT1091_ENG.book 64 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Menu ª [CARD RECORDING MENU] 1) [BASIC] [SCENE MODE] -38[PICT.QUALITY] -32[PICTURE SIZE] -31[ASPECT] -37[CLOCK SET] -172) [ADVANCED] [O.I.S.
LSQT1091_ENG.book 65 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Menu Menus related to taking pictures Menus related to playback ª [DATE/TIME] This switches between date and time indications. ≥The Camcorder automatically records the date and time the picture was taken on the tape/card. ≥You can also show or change the date/time indication by repeatedly pressing the [DATE/ TIME] button on the remote control.
LSQT1091_ENG.book 66 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Others Indications Various functions and the Camcorder status are shown on the screen. Basic indications : Remaining battery power 0h00m00s00f: Time code 3:30:45PM: Date/Time indication Recording indications R0:45: Remaining tape time ≥Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.
LSQT1091_ENG.book 67 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others ≥For images not recorded with this unit, the number of horizontal and vertical pixels may differ so the image size is not displayed. Warning/alarm indications If any one of the following indications lights up or flashes, please check the Camcorder. Confirmatory indications Y: A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted. No cassette is inserted. [--]/0: The built-in battery is low.
LSQT1091_ENG.book 68 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others CHANGE MODE TO USE USB: The USB cable is connected to the Camcorder in Card Recording Mode. DISCONNECT USB CABLE: You are attempting to turn the mode dial in PC Connection Mode with the USB cable connected to the Camcorder. You are attempting to record pictures on a tape/card with the USB cable connected to the Camcorder. NO INK IN PRINTER: There is no ink. Check the connected printer. NO PAPER IN PRINTER: There is no paper.
LSQT1091_ENG.book 69 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others ≥Audio dubbing ≥The section of a tape recorded in LP mode ≥The blank section of a tape ≥Sounds sent through the DV terminal Before requesting repair (Problems and solutions) Power/Body 1: The Camcorder power cannot be turned on. • Is the battery fully charged? Use a fully charged battery. • The battery protection circuit may have operated. Attach the battery to the AC adaptor for 5 to 10 seconds.
LSQT1091_ENG.book 70 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others 3: A cassette cannot be inserted. • Has condensation occurred? Wait until the condensation indication disappears. 4: Auto focus function does not work. • Is manual focus mode selected? If auto focus mode is selected, focus is automatically adjusted. • There are some recording subjects and surroundings for which the auto focus does not operate correctly. (-76-) If so, use the manual focus mode to adjust the focus.
LSQT1091_ENG.book 71 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others off the terminal with a soft cloth and then connect the cable to the A/V terminal. • Is a picture containing a copyright protection signal (copy guard) being recorded? When a protected picture is played back by the Camcorder, mosaic-like patterns appear on the picture. Card 1: Recorded pictures are not clear. • Have you set [BASIC] >> [PICT.
LSQT1091_ENG.book 72 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Cautions for Use ª About condensation If you turn the Camcorder on when condensation occurs on the head or the tape, condensation Indication [3] (yellow or red) is displayed on the viewfinder or the LCD monitor and the messages [3DEW DETECT] or [3EJECT TAPE] (only when the tape is inserted) appear. If so, follow the procedure below. 1 Remove the tape if it is inserted. ≥It takes about 20 seconds to open the cassette holder.
LSQT1091_ENG.book 73 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others battery or reconnect AC adaptor and turn the Digital Video Camcorder on. Do not use the Digital Video Camcorder near radio transmitters or high-voltage lines. ≥If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. Do not spray insecticides or volatile chemicals onto the Camcorder.
LSQT1091_ENG.book 74 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others ª About the AC adaptor ≥If the battery is warm, charging requires more time than normal. ≥If the temperature of the battery is extremely high or extremely low, the [CHARGE] lamp may continue flashing and the battery may not be charged. After the battery temperature has decreased or increased sufficiently, recharging starts automatically. So, wait for a while.
LSQT1091_ENG.book 75 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others ª LCD monitor/viewfinder LCD monitor ≥When the LCD monitor gets dirty, wipe it with a dry soft cloth. ≥In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. ≥If your Camcorder is extremely cold, the LCD monitor is slightly darker than usual immediately after you turn the power on. However, as the internal temperature increases, it goes back to normal brightness.
LSQT1091_ENG.book 76 ページ ２００６年１１月２７日 月曜日 Others ª White balance The image recorded by the Camcorder may become bluish or reddish under the influence of light sources. To avoid such phenomena, adjust the white balance. White balance adjustment determines the white color under different light sources. By recognizing which is the white color under sunlight and which is the white color under a fluorescent lamp, the Camcorder can adjust the balance among the other colors.
LSQT1091_ENG.book 77 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Specifications Digital Video Camcorder Information for your safety Power source: DC 7.9/7.2 V Power consumption: Recording 5.2 W Recording format: Mini DV (Consumer-use digital video SD format) Tape used: 6.
LSQT1091_ENG.book 78 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others AC adaptor Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 19 W DC output: DC 7.9 V, 1.4 A (Camcorder operation) DC 8.4 V, 0.65 A (Battery charging) Dimensions: 61 mm (W)k32 mm (H)k91 mm (D) 2.40 inch (W)k1.26 inch (H)k3.58 inch (D) Mass: Approx. 110 g (0.24 lbs) Specifications may change without prior notice. Maximum number of still pictures recordable on an SD Card (optional) [16:9] mode: PICTURE SIZE 0.
LSQT1091_ENG.
LSQT1091_ENG.book 80 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Camcorder Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Palmcorder Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.95 Total Enclosed 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
LSQT1091_ENG.book 81 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Request for Service Notice (USA Only) Please photocopy this form when making a request for service notice, in the unlikely event this product needs service. Request for Service Notice: •Please include your proof of purchase. (Failure to do so will delay your repair.) •To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
LSQT1091_ENG.book 82 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Limited Warranty (For USA Customers) PANASONIC PUERTO RICO, INC. Ave. 65 de Infantería, Km. 9.
LSQT1091_ENG.book 83 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Customer Services Directory Service in Canada: As per Service Center listed in Canadian warranty information on page -84-. Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.
LSQT1091_ENG.book 84 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Warranty (For Canadian Customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
LSQT1091_ENG.book 85 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Index ª Numerics ªP 4:3 Function ...................................................37 Photoshot ...................................................... 31 PictBridge ...................................................... 50 Portrait Mode ................................................. 38 ªA AC Adaptor ..............................................15, 74 Aperture .........................................................41 Audio Dubbing ......
LSQT1091_ENG.book 86 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others Spanish Quick Use Guide/ Guía española para el uso rápido 3 Apriete la marca [PUSH] 1 a fin de cerrar el compartimiento del cassette. ª Carga de la batería 1 Conecte el cable eléctrico de CA al adaptador de CA y a la toma de la red de CA. 2 Meta la batería en el respectivo soporte alineando la marca, luego encájela. 1 PUSH 4 Sólo cierre la tapa del cassette después de que el respectivo compartimiento esté cabalmente alojado.
LSQT1091_ENG.book 87 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Others ª Cómo apagar la alimentación 1 Mientras que oprime el botón 1, ponga el 1 Oprima el botón de Photoshot [ ]. interruptor [OFF/ON] en [OFF]. 1 OFF ON ª Grabación en una cinta ≥Ajuste al modo de grabación de cinta. ª Reproducción de la cinta ≥Ajuste al modo de reproducción de cinta. 1 Oprima el botón de inicio/parada de la grabación para empezar a grabar.
LSQT1091_ENG.book 88 ページ ２００６年１１月２７日 月曜日 午後１時１７分 Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 P Printed in Japan LSQT1091 A F1106Ak0 ( 7500 ) © 2006 Matsushita Electric Industrial Co., Ltd.
