Digital Video Camcorder Operating Instructions Models No. (PV-GS59 Shown) PV-GS59 PV-GS39 PV-GS29 Before attempting to connect, operate or adjust this product, please read these instructions thoroughly. Spanish Quick Use Guide is included. Guía para rápida consulta en español está incluida. For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo For assistance, please call : 1-800-561-5505 or visit us at www.panasonic.
Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we’re sure it will bring you and your family years of enjoyment. Please take time to fill in the information on the right. The serial number is on the tag located on the underside of your Camcorder. Be sure to retain this manual as your convenient Camcorder information source.
- U.S.A. CONSUMERS OnlyDeclaration of Conformity Trade Name : Panasonic Model No. : PV-GS29/PV-GS39/PV-GS59 Responsibility Party : Panasonic Corporation of North America Address : One Panasonic Way Secaucus New Jersey 07094 Telephone Number : 1-800-211-PANA(7262) This device complies with Part 15 of the FCC Rules.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Precautions USE & LOCATION WARNING ● TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture. Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your Camcorder.
End User License Agreement (for USB Driver, MotionDV STUDIO and Quick Movie Magic) Before opening the CD-ROM package (PV-GS59 Only), please read the following. You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co., Ltd.
Differences between models This operating instruction book is designed for use with models PV-GS29, PV-GS39 and PV-GS59. The PV-GS59 is the model used for illustrative purposes. Features may vary, so please read carefully. Model Number PV-GS29 PV-GS39 PV-GS59 Battery Pack (Supplied) CGR-DU06 (640 mAh) CGR-DU06 (640 mAh) For U.S.A. customers: CGR-DU06 (640 mAh) For Canada customers: CGA-DU12 (1 150 mAh) CD-ROM – – Supplied (LSFT0648) USB Cable – Card Feature No Yes Yes Monitor 2.
With a PC (Operating System Compatibility Chart) Before using the PC function (pp. 56~69), please refer to the OS (operating system) compatibility chart, below.
Contents Before Using Things You Should Know .......................................2 Safety Precautions .................................................2 Precautions .............................................................5 End User License Agreement .................................6 Differences between models ..................................7 With a PC (Operating System Compatibility Chart) ...8 Quick Guide ..........................................................10 Standard Accessories ........
Quick Guide Inserting a Card 1 Using the Battery 1 Attach the Battery to the AC Adaptor and charge it. Place your Thumb on the [OPEN] 1 Knob and pull the LCD Monitor 2 out in the direction of the arrow. 2 1 • Before use, fully charge the Battery. • Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor. • The [CHARGE] Lamp lights up, and charging starts. • When the [CHARGE] Lamp goes off, charging is completed.
2 Adjust by turning the Eyepiece Corrector Knob 1 . Playing Back a Tape 1 [One-Touch Navigation icon] Recording on a Tape 1 Set the Mode Dial to Tape Recording Mode. (PV-GS39/ (PV-GS29) PV-GS59) 2 • The [ TAPE RECORDING MODE] is displayed on the screen. (PV-GS39/ PV-GS59) 2 (PV-GS29) 3 Move the Joystick Control [▲] 2 to start playback. 2 Press the Recording Start/Stop Button. • Recording starts. Move the Joystick Control [▼] 3 to stop playback.
Before Using Parts Identification and Handling Camcorder Standard Accessories 3 4 5 2 The following accessories are supplied with your Camcorder. 1) 6 7 PV-DAC14D K2GJ2DC00011 2) 3) CGA-DU12 (PV-GS59 Canada Only) 4) CGR-DU06 K2KC4CB00020 5) LSFC0018 K1HA05CD0014 LSFT0648 (For PV-GS39 (PV-GS59 Only) (Canada Only)/ PV-GS59) 1) AC Adaptor, DC Cable and AC Cable (pp. 15~16) CAUTION: This unit will operate on 110/120/220/240 V AC.
15 Audio-Video Output Jack [AV OUT] 30 Mode Dial (p. 23) (pp. 51, 54) 31 Recording Start/Stop Button (p. 30) 32 Joystick Control (pp. 23, 25) 33 Light Button [LIGHT] (pp. 33~34) 34 16 17 35 18 36 21 19 20 22 34 Grip Belt (p. 17) 35 Tripod Receptacle 16 Cassette Eject Lever [OPEN/EJECT] • This is a hole for attaching the Camcorder to optional tripod. (Please carefully read the Operating Instructions for how to attach the tripod to the Camcorder.
The Remote Control (PV-GS59 Only : Optional) 43 Inserting the Button-type Battery Before using the Remote Control, insert a button-type battery (not supplied). 42 44 45 42 Slow Motion/Still Advance Buttons [◄Ι, Ι►] (◄Ι: reverse, Ι►: forward) (p. 46) 1 While pressing the Lock Button 1 , pull out the Battery Holder. 2 Insert a button-type battery (CR2025) with the (+) marking facing upward. 3 Insert the Battery Holder into the Remote Control. 43 Zoom/Volume Button [ZOOM/VOL]* 1 (pp.
Power Supply Using the Remote Control (PV-GS59 Only : Optional) Direct the Remote Control at the Remote Control Sensor of the Camcorder and press an appropriate button. Using the AC Adaptor • Before connecting or disconnecting the power supply, set the [OFF/ON] Switch on the Camcorder to [OFF] and make sure that [STATUS] Indicator is not lit. (p.
• Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it from the AC Adaptor. • The [CHARGE] Lamp lights up, and charging starts. • When the [CHARGE] Lamp goes off, charging is completed. • When the battery is completely discharged, the [CHARGE] Lamp blinks at first, but the battery is charged normally. When the temperature of the battery is too high or low, the [CHARGE] Lamp blinks and the charging time becomes longer than usual.
To Use as a Grip Belt Adjust the length of the Grip Belt to the size of your hand. 1 Detach the end of the Grip Belt. 2 Adjust the length of the Grip Belt to the size of your hand. 3 Reattach the Grip Belt. Before Using • “1 h 40 min.” indicates 1 hour and 40 minutes. • Battery CGR-DU06 (PV-GS29/PV-GS39/PV-GS59 U.S.A.) or CGA-DU12 (PV-GS59 Canada) is supplied. • The times shown in the table are approximate times. The numbers indicate the recording time when the Viewfinder is used.
• When not using the Lens Cap, pull the Lens Cap Cord in the direction of the arrow. 1 • When you are not recording, be sure to cover the Lens with the Lens Cap for protection. 2 2 1 • When you remove the Lens Cap, press the knobs firmly. Inserting/Removing a Cassette • Please use Genuine Panasonic DVC Tapes for more information please contact your local dealer or visit www.panasonic.com.
Notes: Caution : 2 Do not place fingers here. 5 [Bottom View] Only after the Cassette Holder is completely housed, close the Cassette Compartment Cover by pressing the mark 3. 3 When the Cassette Holder does not come out • Close the Cassette Compartment Cover completely, and then open it again completely. • Check if the battery has run down. • Check if the Cassette Compartment Cover is in contact with grip belt as shown below. If so, be sure the grip belt stays clear of the cover when opening.
3 While holding the Memory Card with its cut corner facing right 1 , insert/remove it into/from the Card Slot. Turning on the Camcorder Turn on the power first and then select modes. How to Turn on the Power 1 Set the [OFF/ON] Switch to [ON] while pressing the button 1 . 1 1 4 Close the Card Slot Cover securely. Removing the Card Open the Card Slot Cover and press the center of the Card and then pull it straight out. • After removing the Card, close the Card Slot Cover.
3 Open the LCD Monitor or extend the Viewfinder again. 3 Press the Joystick Control to finish setting the date and time. • The clock operation starts from [00] second. • If the built-in battery is weak, the [ ] Indication flashes. In this case, charge the built-in battery. • The clock uses the 12-hour system. About Date/Time • The Date and Time function are driven by a built-in lithium battery. • Make sure to check the time before recording because the built-in clock is not very accurate.
Using the LCD Monitor Adjusting Brightness and Color Level With the LCD Monitor open, you can also record the picture while watching it. 1 Place your Thumb on the [OPEN] Knob and pull the LCD Monitor out in the direction of the arrow. When [ LCD SET] or [ EVF SET] on the [ SETUP] Sub-Menu is set to [YES], the following items are displayed. LCD SET • The LCD Monitor will be activated. • It can open up to 90°.
Easy to Use Mode Dial You can choose a desired mode by rotating the Mode Dial. Rotate the Mode Dial. • Set your desired mode to 1 . 1 1 (PV-GS39/ PV-GS59) : (PV-GS29) Joystick Control (See below) Press Center Press ▼ Tape Recording Mode Use this mode when recording pictures on a tape. : Tape Playback Mode Before Using 1 Joystick Control and Screen Display Press the center of the Joystick Control, and the One-Touch Navigation icon will be displayed on the lower right of the screen.
Tape Recording Mode • When the [AUTO/MANUAL/FOCUS] Switch is set to [AUTO]. 1/4 NEXT 2/4 NEXT Tape Recording Mode • When the [AUTO/MANUAL/FOCUS] Switch is set to [FOCUS]. 1/6 NEXT 4/4 NEXT 3/4 NEXT 2/6 NEXT 3/6 NEXT WB MF MF – + 6/6 NEXT 1 IRIS SHTR 5/6 NEXT 4/6 NEXT WB 1/4 2/4 3/4 ◄ Fade p. 37 ► Help Mode* p. 25 ▲ Backlight compensation p. 37 ▼ Go to next page. ◄ Soft Skin Mode ▼ Go to next page. – ▲ MagicPix Mode p. 38 ▼ Go to next page.
3 Card Recording Mode (For PV-GS39/PV-GS59) e.g. WB IRIS 2/4 NEXT 1/4 NEXT SHTR 3/4 NEXT MF MF – + 4/4 NEXT USAGE TO MOVE JOYSTICK IN DIRECTION OF DESIRED FUNCTION EXIT 1/4 NEXT SET 4 ◄ Manual Focus Adjustment Mode p. 44 4/4 ► Manual Focus Adjustment Mode p. 44 ▼ Go to next page. EXIT Move the Joystick Control [▲▼◄►] to select the desired function. e.g.
3 4 Move the Joystick Control [►] or press it to set the selection. Move the Joystick Control [▲] or [▼] to select the Sub-Menu. BASIC SCENE MODE REC SPEED WIND CUT ASPECT CLOCK SET SETUP ENTER 5 6 The menu screen transition is the same as when the buttons on the main unit are used. OFF SP ON 16:9 NO EXIT Move the Joystick Control [►] or press it to set the selection. 1 2 Move the Joystick Control [▲] or [▼] to select the item to be set.
[ ADVANCED] [ Advance Setup Sub-Menu [ PICT.QUALITY] (For PV-GS39/PV-GS59) ADVANCED] Advance Setup Sub-Menu [ REC SPEED] Recording Speed Mode (p. 29) [ [ EIS] REC STDBY] Image Stabilizer (p. 36) Recording Standby Mode (p. 54) [ [ FADE COLOR] PICT.QUALITY] (For PV-GS39/PV-GS59) Fade color (p. 37) Picture Quality (p. 32) [ [ AUDIO REC] Audio Recording Mode (p. 28) [ USB FUNCTION] (PV-GS59 Only) [ USB Functions Mode (pp. 61, 67) [ D.ZOOM] Audio Selector (p.
[ SETUP] Menus Related to Taking Pictures Setup Sub-Menu [ DISPLAY] DATE/TIME This switches between date and time indications. Set [ BASIC] or [ SETUP] >> [ DATE/TIME] >> [D/T], [DATE] or [OFF]. • The Camcorder automatically records the date and time of picture taking on the tape. • You can also show or change the Date/Time Indication by repeatedly pressing the [DATE/ TIME] Button on the Remote Control (PV-GS59 Only). Display Mode (p. 28) [ DATE/TIME] Date and Time Indication (pp.
POWER SAVE Menus Related to Playback AUDIO OUT LP Mode You can switch the tape recording speed. • Set to Tape Recording/Playback Mode. 1 Set [ BASIC] or [ ADVANCED] >> [ REC SPEED] >> [LP]. If the LP mode is selected, the recording time will be 1.5 times the SP mode, but some functions will be disabled. • We recommend using the SP mode for important recordings. • In order to fully exhibit the performances of the LP mode, we recommend using Panasonic cassettes marked LP mode.
4 Recording Mode About Recording Press the Recording Start/Stop Button again to pause the recording. • The [PAUSE] and [ • When recording pictures on a tape, set the Mode Dial to Tape Recording Mode [ ]. • When recording still pictures on a card, set the Mode Dial to Card Recording Mode [ ] (For PV-GS39/PV-GS59). • When recording with the [AUTO/MANUAL/FOCUS] Switch set to [AUTO], the Camcorder automatically adjusts the Focus and White Balance.
To Check the Recording • The [ ] indication and the One-Touch Navigation icon appears during the Blank Search. You can play back the last few seconds of the recorded scene in the Recording Pause Mode. SP • Set to Tape Recording Mode. 1 2 Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen. 12:34:56AM JAN 2 2006 Move the Joystick Control [▼] until the page with [ ] indication is displayed. Move the Joystick Control [◄] to select [ ].
Recording a Still Picture on a Card (Photoshot) (For PV-GS39/PV-GS59) Still pictures can be recorded on the Memory Card from the Camcorder. • Open the LCD Monitor or extend the Viewfinder before turning on the power. 1 2 (Normal) 440 440 880 1 760 Set the [OFF/ON] Switch to [ON]. 256 MB 1 760 3 520 • The [STATUS] Indicator lights Red. 512 MB 3 520 7 040 1 GB 7 040 14 080 2 GB 14 080 28 160 Set the Mode Dial to Card Recording Mode. • The numbers shown in the table are approximations.
Notes: Notes: • Even if the [ SHTR EFFECT] is set to [ON], the Shutter Effect cannot be recorded on the picture. • When the color of the screen changes or blurs, adjust the shutter speed manually to 1/60 or 1/100. • Photoshot Recording results in slightly inferior image quality. • For the number of still pictures to be recorded on a card, refer to page 32. • The sound cannot be recorded. • While data is being recorded on a card, do not operate the Mode Dial.
2 3 Press the [LIGHT] Button. 2 • Gain Up mode is set to off. • To eliminate washed out images, use this mode. • The Video Light turns off. • Pressing the [LIGHT] Button again returns to 1 . 2 100 1 3 100 100 3 Notes: • The subject should be within 4.9 feet (1.5 meters) of the Camcorder. • Using the LED Video Light reduces battery time. • Set the LED Video Light to off when not in use. • Do not look directly into the light.
Self-timer Recording (For PV-GS39/PV-GS59) Zoom In/Out Functions When you set the self-timer, the recording starts automatically after 10 seconds on the Card. • Set to Card Recording Mode. 1 2 Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen. This feature gives special effects to the picture by recording objects close by or with wide-angle shot. You can zoom in up to 30× optically. • Set to Tape/Card Recording Mode.
Digital Zoom Function Image Stabilizer Function This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1× to 30× magnification. With the Digital Zoom Function, you can select a magnification from 50× up to 1000×. If the Camcorder is shaken while recording, the camera shake in the image can be corrected. • If the Camcorder shakes too much, the images may not be stabilized. • Set to Tape Recording Mode. 1 1 Set [ ADVANCED] >> [ [50×] or [1000×].
To Select the Color For Fade in/out Fade In/Out Functions The color which appears in fading pictures can be selected. • Fade In : The image and audio gradually appear. • Fade Out : The image and audio gradually disappear. 1 • Set to Tape Recording Mode. Note: 1 2 Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen. Move the Joystick Control [▼] until the page with [ ] indication is displayed.
MagicPix Function Soft-Skin Mode This function allows you to record color images brightly in a dark place without using the Video Light. • Set to Tape Recording Mode. 1 2 Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen. Move the Joystick Control [▼] until the page with [ ] indication is displayed. [One-Touch Navigation icon] This enables you to record skin colors in a softer tone.
Wind Noise Reduction Function This function reduces the sound of wind hitting the microphone when recording. • Set to Tape Recording Mode. 1 Set [ BASIC] >> [ • The [ WIND CUT] >> [ON]. ] Indication appears. SP 12:34:56AM JAN 2 2006 2:00 100 To Cancel the Wind Noise Reduction Function Set [ BASIC] >> [ WIND CUT] >> [OFF]. Notes: • The default setting is [ON]. • Reduces the wind noise depending on the wind strength.
To Cancel the Scene Mode Recording in Special Situations (Scene Mode) You can select optimal scene mode under specific recording situations. • Set to Tape/Card Recording Mode. 1 Set the [AUTO/MANUAL/FOCUS] Switch to [MANUAL]. Set [ BASIC] >> [ SCENE MODE] >> [OFF]. Or, set the [AUTO/MANUAL/FOCUS] Switch to [AUTO]. Notes: • If any of the Scene Modes are selected, you cannot adjust the shutter speed (p. 42) or iris (p. 43). • Using the MagicPix Function cancels any of the Scene Modes.
Recording in Natural Colors (White Balance) 1) 2) Depending on the scene or lighting conditions, the Automatic White Balance Adjustment Mode may not be able to bring out natural colors. In this case, the white balance can be adjusted manually. When the Camcorder is turned on with the Lens Cap on, the Automatic White Balance Adjustment may not function properly. Please turn on the Camcorder after removing the Lens Cap. • Set to Tape/Card Recording Mode.
3 Move the Joystick Control [◄] or [►] until the [ ] Indication is displayed. SP 3h59m59s29f R 2:00 ► WB WB < > BACK 12:34:56AM JAN 2 2006 4 5 100 Point the Camcorder at a full-screen white subject. Move the Joystick Control [▲] until the [ ] Indication stops flashing. To Resume Automatic Adjustment Move the Joystick Control [◄] or [►] until the [ ] Indication appears. Or, set the [AUTO/ MANUAL/FOCUS] Switch to [AUTO].
2 Move the Joystick Control [►] to select [ ]. [One-Touch Navigation icon] You can use this function when the screen is too bright or too dark. • Set to Tape/Card Recording Mode. WB IRIS Manual Iris Adjustment (F Number) SHTR 1 5/5 NEXT Set the [AUTO/MANUAL/FOCUS] Switch to [MANUAL]. • The Shutter Speed Indication appears. SP 3h59m59s29f R 2:00 ►1/100 SHTR SHTR – + BACK 3 • The [ ] Indication and the One-Touch Navigation icon appears.
Notes: • Depending on zoom magnification, there are iris values that are not displayed. • If the value does not become [OPEN], you cannot adjust the gain value. • If the gain value is increased, the noise on the screen increases. • If you are using MagicPix Mode (p. 38) or Scene Mode (p. 40), you cannot adjust the iris. • If you attempt to adjust the Shutter Speed after setting the Iris, the value set for the Iris will be canceled.
Playback Mode Adjusting the Sound Volume Adjust the speaker volume for playback. Playing Back a Tape The recorded scene can be played back immediately after the recording. • Open the LCD Monitor or extend the Viewfinder before turning on the power. 1 2 1 Push the [– volume. / VOL +] Lever to adjust the • Towards [+]: increases the volume Towards [–]: decreases the volume (Nearer the bar to [+], larger the volume.) Set the [OFF/ON] Switch to [ON]. • The [STATUS] Indicator lights Red.
Finding a Scene You Want to Play Back • Set to Tape Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. Cue/Review Playback 1 • The following 6 playback speeds are available for the Variable Speed Search Function in both the fast-forwarding and rewinding directions: 1/5× (slow playback in SP Mode only), 1/3× (slow playback in LP Mode only), 1×, 2×, 5×, 10× and 20×. To Resume Normal Playback Press the [►] Button or [VER SEARCH] Button.
Still Playback/Still Advance Playback 2 Set the Mode Dial to Picture Playback Mode. • The [ CARD PLAYBACK MODE] is displayed on the screen. • The One-Touch Navigation icon is displayed on the lower right of the screen. This Camcorder is capable of still picture playback and frame-advance playback. • Set to Tape Playback Mode. [One-Touch Navigation icon] • The One-Touch Navigation icon is displayed on the lower right of the screen. 1 2 3 (PV-GS59 Only) Press the [►] Button.
2 Move the Joystick Control [▲, ▼, ◄, or ►] to select a desired file. Slide Show (For PV-GS39/PV-GS59) The recorded still pictures in the Card can be played back like a Slide Show. • Set to Picture Playback Mode. • In the Multi-screen display, - Move the Joystick Control [▲, ▼, ◄, or ►] to select a file (The selected file will be encircled by a yellow frame) and press to determine it. The selected file is full-screen displayed. - If there are 7 files or more, then move the Joystick Control.
Deleting the Files Recorded on a Card (For PV-GS39/PV-GS59) To Select and Delete All Files 1 Using the Camcorder, you can delete the files recorded on a Card. After the file is deleted, it cannot be restored. Move the Joystick Control [▼] to select [ ]. [One-Touch Navigation icon] • Set to Picture Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. To Select and Delete Files 1 2 Move the Joystick Control [◄] or [►] to select the file to be deleted.
Writing Printing Data on a Card (DPOF Setting) (For PV-GS39/PV-GS59) DPOF Setting Printing data (DPOF Settings), such as the number of images to be printed, can be written to the Card. “DPOF” means Digital Print Order Format. • Set to Picture Playback Mode. • The One-Touch Navigation icon is displayed on the lower right of the screen. 1 Set [ ADVANCED] >> [ [SET]. DPOF SET] >> • When all images are not printed, select [CANCEL ALL]. About the DPOF DPOF stands for Digital Print Order Format.
Notes: • The Lock Setting carried out by this Camcorder is only effective for this Camcorder. • The SD Memory Card has a write protection switch on it. If the switch is moved to the [LOCK] side, you cannot write to or format the Card. If it is moved back, you can. Formatting a Card (For PV-GS39/PV-GS59) Playing Back on Your TV By connecting your Camcorder with your TV, the recorded scenes can be viewed on your TV screen. • Before connecting them, turn off the power of both the Camcorder and TV.
To Display the On-screen Information on the TV 1 The information displayed on the LCD Monitor or the Viewfinder (One-Touch Navigation icon, time code and mode indication, etc.), date and time can be displayed on the TV. Press the [EXT DISPLAY] Button on the Remote Control. (PV-GS59 Only) • Press the button again to erase the OSD information. Note: • Use the AC adaptor to avoid battery depletion.
2 Editing Mode Recording from a Tape onto a Card (For PV-GS39/PV-GS59) 3 Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette. 1 Press the [AUDIO DUB] Button on the Remote Control. • The [ ] Indication appears. To start Audio Dubbing, press the [ ] Button on the Remote Control. Or, move the Joystick Control [▲] to select [ ]. • The [ ] Indication appears. • Talk into the microphone. Set the Mode Dial to Tape Playback Mode.
Copying onto a DVD Recorder or a VCR (Dubbing) 5 6 Pictures recorded by the Camcorder can be stored on a DVD-RAM or other such media. Refer to the instructions for the recorder. 7 • Place a recorded cassette in the Camcorder, and an unrecorded DVD-RAM or cassette in the DVD Recorder or VCR. 1 Connect the Camcorder and the Recorder. Connecting with the AV Cable [VIDEO IN] [AUDIO IN] Start recording. Move the Joystick Control [▼] to stop playback. Stop recording.
Player: 3 Press the [►] Button to start playback. Recorder: 4 Set [ ADVANCED] >> [ REC STDBY] >> [YES], then move the Joystick Control [▲] to select [ ]. SP 3h59m59s29f R 12:34:56AM JAN 2 2006 2:00 100 Or, while pressing the [● REC] Button, press the [►] Button on the Remote Control. (PV-GS59 Only) • Recording starts.
4 With a PC • This function is available for models PV-GS39 and PV-GS59. Using Camcorder with a PC An image stored on the DV Cassette or Memory Card can be transferred to your personal computer. Software Installation (For Windows) (PV-GS59 Only) 1 2 Turn on the personal computer and start up Windows. Insert the CD-ROM into the personal computer’s CD-ROM drive. Follow the instructions on the computer screen until the installation is complete.
Operating environment • Despite having the Operating environment indicated, it may not be possible to use the program with some types of personal computers. • When you connect to an USB 2.0 interface board, use a certified board with the USB 2.0 (HI-SPEED USB) logo. For Windows OS: 1 Function: IBM PC/AT compatible personal computer with pre-installed: Microsoft Windows XP Professional/Home Edition Microsoft Windows 2000 • The USB equipment operates with the driver installed standard on your OS.
6 7 7 After the USB Driver is installed, please restart your computer. • Reboot the computer to finish installing USB driver. • Installation continues after the computer reboots if you selected additional software. PV-GS39 Only • For Windows XP users, the USB equipment operates with the driver installed standard on your OS. • If you have Internet access, please download the USB Driver. 1 To download and install the Driver, go to: (For U.S.A. consumers) http://www.panasonic.
4 5 Open [My Computer] and click [Removable Disk] 1 (For Windows 2000 users). 4 Click [Open folder to view files using Windows Explorer] 2 and then [OK] (For Windows XP users). [Windows 2000] [Windows XP] Double click the “NO_NAME” icon. • You can view images stored on the Memory Card and also save them to your hard disk. • Please do not change file or folder names on the Personal Computer. The images on the Memory Card may not be able to be viewed on the Camcorder.
For Macintosh Removing the USB Cable safely for Macintosh Using as a Web Camera If the Camcorder is connected to your personal computer, you can send video and sound from the Camcorder to the other parties via the network. • Do not connect the USB Cable until the USB Driver is installed. (pp. 57~58) Please see chart below. [Send] [Receive] 1 Drop the [NO_NAME] icon which appeared when you connected the Camcorder with the USB Cable into the recycle bin, then disconnect the USB Cable.
To use the Camcorder as a Web Camera, the following conditions must be met. • To upgrade Windows XP to SP1 (PV-GS59) / SP2 (PV-GS39) or later, click [Start] >> [All Programs] >> [Windows Update]. (Requires Internet connection.) • To upgrade Windows 2000 to SP4 or later, click [Start] >> [All Programs] >> [Windows Update]. (Requires Internet connection.) • You have direct dial-up connection capability to the Internet. Also, you and the other person(s) are in the same Network (LAN).
• When you use Windows XP, the other parties via the network have to use the Windows Messenger on Windows XP. When you use other than Windows XP, the other parties via the network have to use MSN Messenger on an OS other than Windows XP. • If the Camcorder is used as a Web Camera, the quality of the video to be exchanged will depend on the Internet connection status. • If the USB Cable is disconnected from the personal computer, the Web Camera mode is canceled.
8 Select [DVC] in the [Microphone] menu. 7 8 Click [Web Camera Settings...] in the [Tools] menu. Confirm that the [Panasonic DVC Web Camera Device] is selected. In the case of MSN Messenger 7.5 1 Type in your E-mail address and password. • For other information about Windows Messenger, please refer to Help. • When access is finished, close Windows Messenger, then turn off the Camcorder. Finally, disconnect the USB Cable.
Using the Motion Picture Editing Software (PV-GS59 Only) Quick Movie Magic You can easily transfer recordings made with your Camcorder to a PC where you can enhance them with titles and music • For advanced users who want to make more precise edits, MotionDV STUDIO offers convenient features. The edited contents set with Quick Movie Magic can be opened in the MotionDV STUDIO where the recording can be made as desired.
4 Select the Video system. • The [Readme] screen is displayed. Please carefully read the displayed contents and close the [Readme] screen. 5 After the completion of setup, click on [Finish]. • Sample data is installed concurrently with the Quick Movie Magic software. 6 3 4 Click [Next]. • After reading the displayed contents, please carry out the installation according to instructions. Select the Video system. • The [Readme] screen is displayed.
To start Quick Movie Magic or MotionDV STUDIO If you wish to capture data from a tape, set the Camcorder to Tape Playback Mode and insert the tape. If you wish to capture images from the lens of the Camcorder, set the Camcorder to the Tape Recording Mode and remove the tape and the card. If a description other than [Microsoft] is displayed • Update the driver with the following procedure. 1 Click [Update Driver...]. 2 Check [Install from a list or specific location (Advanced)] and then click [Next].
Connecting the Camcorder to a personal computer 1 Set the Camcorder to Tape Recording Mode or Tape Playback Mode. 2 Set [ BASIC] or [ ADVANCED] >> [ USB FUNCTION] >> [MOTION DV]. 3 • It enters MotionDV STUDIO (Quick Movie Magic) Mode. Connect the Camcorder to your personal computer with USB Cable. 2 Connect the Camcorder to the personal computer with DV Cable. 3 Start Quick Movie Magic or MotionDV STUDIO LE for DV. • You can record the video edited by the PC onto the Tape in the Camcorder.
2 Connect the Camcorder to your Macintosh with the DV Cable. 3 Click the [ 4 Click [Create a New Project]. 5 Click [Create] in the [Create Project] screen and select a folder in which to save the motion pictures. iMovie HD] icon. • “Camera connected” is displayed. • Confirm the [ ] is selected. 6 7 Click [ ] to playback the tape. Click [Import] to capture the motion pictures you wish to save. • For more information about iMovie HD, please refer to Help.
• If you install the USB Driver after the USB Cable is connected, or if you do not follow these Operating Instructions, the Camcorder will not be recognized correctly. In this case, delete the USB Driver from [Device Manager] as described below, uninstall the USB Driver, and re-install it. • With the Camcorder and personal computer connected via a USB Cable, open the [Device Manager]. Right-click [!DVC] 1 in [Ports] or [Other devices], and select [Uninstall].
Others Indications Various functions and the Camcorder status are shown on the screen. Basic indications: 1/500 : Shutter Speed (pp. 42~43) : F2.4 : 6dB Slide Show Playback (p. 48) W: B: : : : Remaining battery power 0h00m00s00f: Time code 12:34:56PM: Date/Time indication Recording indications: R0:45: Remaining tape time • Remaining tape time is indicated in minutes. (When it reaches less than 3 minutes, the indication starts flashing.) : Tape Recording Mode (p. 30) : Tape Playback Mode (p.
Warning/Alarm Indications If any one of the following indications lights up or flashes, please check the Camcorder. Confirmatory Indications A cassette with the accidental erasure prevention slider placed in the [SAVE] position is inserted. No cassette is inserted. The built-in battery is low. (p. 21) [--] / : The Warning/Alarm Indication appears : when you record yourself. Turn the LCD Monitor towards the Viewfinder and check the Warning/Alarm Indication. No card is inserted.
CHANGE TO MANUAL MODE: You are attempting to select an item other than [OFF] in [ SCENE MODE] when the [AUTO/ MANUAL/FOCUS] Switch is set to [AUTO]. CAN NOT OPERATE (MOTION DV MODE) (PV-GS59 Only): You are attempting to change [ D.ZOOM] setting during MotionDV Mode. TURN OFF THE VIDEO LIGHT: You are attempting to select an item in [ SCENE MODE] when Light is on. REVERSE THE LCD MONITOR: When the LCD Monitor is rotated by 180° towards the lens, the brightness of the LCD Monitor cannot be adjusted.
About AC Adaptor Video Head Clogging and Care • If the temperature of the Battery is extremely high or extremely low, the [CHARGE] Lamp may continue flashing, and the Battery may not be charged. After the temperature of the Battery has decreased or increased sufficiently, charging starts automatically. If the [CHARGE] Lamp continues to flash even after the Battery temperature has decreased or increased sufficiently, the Battery or AC Adaptor may be faulty. In this case, please contact a dealer.
Optimal Use of the Battery Battery Characteristics This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. If the Battery is used in an extremely cold environment, the Battery may operate only for about 5 minutes.
LCD Monitor/Viewfinder/Lens Hood LCD Monitor • In a place with drastic temperature changes, condensation may form on the LCD Monitor. Wipe it with a soft dry cloth. • If your Camcorder is extremely cold when you turn its power on, the image on the LCD Monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness.
The Camcorder cannot be operated though powered up. The Camcorder does not operate normally. • The Camcorder cannot be operated unless you open the LCD Monitor or extend the Viewfinder. • Remove the cassette and then press the [RESET] button. (p. 78) If normal conditions are not restored yet, turn off the power. Then, about 1 minute later, turn on the power again. (Conducting the above operation when the Access Lamp is on may destroy the data on the card.) The cassette cannot be removed.
Playback (Sound) Sound is not played back from the built-in speaker of the Camcorder. Although the Camcorder is correctly connected to a TV, playback images cannot be seen. • Is the volume too low? During playback, push the [– / VOL +] lever to display the volume indication and adjust it. (p. 45) • Have you selected video input on the TV? Please read the operating instructions of your TV and select the channel that matches the input terminals used for the connection.
Others The indication disappears, the screen is frozen, or no operation can be performed. • Turn off the power to the Camcorder. If the power cannot be turned off, press the [RESET] button (p. 78), or detach the battery or AC adaptor and then reattach it. After that, turn on the power again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased the Camcorder from. [PUSH THE RESET SWITCH] is displayed.
Explanation of Terms Digital Video System In a digital video system, images and sounds are converted into digital signals and recorded on a tape. This complete digital recording is capable of recording and playback with minimal image and sound deterioration. In addition, it automatically records data, such as Time Code and Date/Time, as digital signals.
Specifications Digital Camcorder Information for your safety Power Source: DC 7.9/7.2 V Power Consumption: Recording 4.2 W (PV-GS29) 4.4 W (PV-GS39/PV-GS59) Recording Format: Mini DV (Consumer-use Digital Video SD Format) Tape Used: 6.35 mm digital video tape Recording/Playback Time: SP: 80 min.; LP: 120 min.
Camcorder Accessory System Accessory # Figure Description PV-DAC14 AC Adaptor with AC Cable and DC Cables CGR-DU06A/1B 640 mAh/Rechargeable Lithium Ion Battery Pack CGA-DU12A/1B 1 150 mAh/Rechargeable Lithium Ion Battery Pack CGA-DU21A/1B 2 040 mAh/Rechargeable Lithium Ion Battery Pack PV-DDC9 (For USA) PV-DDC9-K (For Canada) DV Interface Cable (i.
Camcorder Accessory Order Form (For U.S.A. customers) Please photocopy this form when placing an order. 1. Camcorder Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling Total Enclosed 6.95 3. Method of payment (check one) Check of Money Order enclosed (NO C.O.D.
Request for Service Notice (For U.S.A. customers) Please photocopy this form when making a request for service notice. Request for Service Notice: In the unlikely event this product needs service. • Please include your proof of purchase. (Failure to do so will delay your repair.) • To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting.
Limited Warranty (For U.S.A. customers) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF PANASONIC PUERTO RICO, INC., AVE. 65 de Infantería, Km. 9.
Customer Services Directory Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/consumersupport or, contact us via the web at: http://www.panasonic.com/contactinfo You may also contact us directly at: 1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
Warranty (For Canada customers) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Spanish Quick Use Guide/Guía Para Uso Rápido Precauciones para su seguridad ADVERTENCIA: Para evitar incendios y descargas eléctricas, no exponga este equipo a la lluvia ni a la humedad. Camcorder está diseñada para grabar y reproducir en el modo de Reproducción Estándar (SP) Su y modo Largo (LP). Se recomienda el uso sólo de cintas de cassette que hayan sido probadas e inspeccionadas para su uso en aparatos VCR con la marca .
Guía rápida Inserción de una tarjeta de memoria 1 Cómo utilizar la batería 1 Coloque la batería en el adaptador de ca y cárguela. Usando su pulgar presione la perilla [OPEN] 1 y saque la pantalla LCD 2 en la dirección de la flecha. 2 1 2 • Antes de usar, cargue completamente la batería. • Debido a que la batería no se cargará cuando el cable de entrada de cc esté conectado al adaptador de ca desconéctelo del adaptador de ca • El indicador [CHARGE] se encienden y la carga comienza.
2 Ajuste rotando la perilla ocular correctora 1. Reproducción de una cinta 1 Ajuste el selector de modo en modo de reproducción de cinta. • Se visualiza la indicación [ REPRODUCCIÓN DE LA CINTA] en la pantalla. • El icono del sistema de navegación de un toque aparece en la parte inferior derecha de la pantalla. 1 [Icono de navegación de un toque] Grabación de una cinta 1 Ajuste el selector de modo en modo de grabación de cinta. • Se visualiza la indicación [ LA CINTA] en la pantalla.
Index A I AC Adaptor ............................................... 15, 73 Audio Dubbing ................................................ 53 Auto Focus ..................................................... 79 Iris ................................................................... 43 B Backlight ......................................................... 37 Blank Search .................................................. 31 Built-in LED Video Light .................................
S Scene Mode ................................................... 40 SD Memory Card ............................................ 69 Self-timer Recording ....................................... 35 Self Recording ................................................ 33 Sensor tag ...................................................... 17 Shutter Speed ................................................ 42 Slide Show ..................................................... 48 Slow Motion Playback ..........................
Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company (“PSC”), Division of Panasonic Puerto Rico, Inc. Ave. 65 de Infanteria, Km. 9.5 San Gabriel Industrial Park Carolina, Puerto Rico 00985 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 www.panasonic.
