nasonlc PalIT)COI_dEI_® Camcorder Operating Instructions Please read these instructions carefully before attempting Please save this manual, to operate this product.
Things You Should Know Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, it will bring you years of enjoyment. Please take time to fill in the information below. The serial number is on the tag located on the underside of your Camcorder. Be sure to retain this manual as your convenient Camcorder information source. f Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No.
Thin,Is You Should Know ll_'_ {:_T! "Jl[_l_. i I i I Is] I [_'-II WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE, Your Compact VHS Camcorder is designed to record and play back in Standard Play (SP) and Super Long Play (SLP) modes, You can also play a Compact VHS Camcorder recording on your VHS VCR using the VHS PlayPak supplied, This Camcorder is equipped with the HQ System to provide excellent video pictures, and is compatible with standard VHS equipment.
Important Safeguards 1. Read Instructions -- All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions-- The safety and operating instructions should be retained for future reference. 3. Heed Warnings -- All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions -- All operating and maintenance instructions should be followed. 5. Cleaning -- Unplug this video unit from the wall outlet before cleaning.
Important Safeguards 15. Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading -- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
Table of Contents Things You Should Know .................................................................................................. Important Safeguards ....................................................................................................... Precautions ....................................................................................................................... Self Demo Mode ....................................................................................................
Self Demo Mode Self Demo mode is on when the screen at the right appears. Follow the steps below to turn it off. Before you begin,.. • ConnectCamcorderto powersource. EVF Screen Panas0nic ITS TAPES PLAY iN YOUR VCR YES, IT'S VHSI 26x LENS / 150x D. ZOOM DIGITAL STABILIZATION FULL-SIZE HEAD SYSTEM AUTO/PHRASE TITLER 2 Set Hold down _ 1 t ME A. over 5 seconds. Note: • Self Oemo stops automatically if battery is attached (page 10) and cassette tape Is inserted (page 13).
Quick Operation Guide Charge Battery Pack fully before operation (page 10). 2 Insert _CHARGE Lamp lights and then goes out when charging is done. Plug in AC AdaDtor, @ Slide TAPE EJECT to open door. 1 Attach fully charged (page 10). Insert cassette (page 13). Press here to close door. 8 i ao] an__-'t-'n F-'le.
Quick Operation Guide |_I | J[_ P.I -"(_e] [i II i[++I Before you begin... • Charge Battery Pack fully before operation (page 10). 2 Press RECORD/PAUSE recording. Press _ recording. to start again to Set AMGA__EJ!_. II "-]I_[1] ,P.[_ :! ! I..11i[i i i [p".ll,_J [e] dl :[TJ ] Press PLAYto start playback. Press STOP to stop playback. Set vc__ _.,_..
Supplying Power |liJ i _l i[o.[=-11 i i [;]1 :_'_ | (q ILV| _L_T'o_ ;ll Charge Battery Pack fully before use. 2 POWER Lamp []1 Plug in AC Adaptor. POWER CHARGE l_' Lamp Lamp lights. Insert (_ _) lineon Align ACright Adaptor. side of Battery with Press Battery down and slide in CHARGE Lamp lights and then goes out when charging is done (approx. direction of arrow. 1 hour). Remove Ba__!_J3£ Slide Battery out and off.
Supplying Power i -'_'I i (;.1_r| --r_Ji i[;.,_--],i This feature completely discharges Battery before recharging begins. Use after about every 5 charges for optimum Battery performance. CHARGE 1 Lamp Plug in AC Adaptor. • POWER Lamp stays on as long as Adaptor is plugged in. P,°ce ,ntoA,aptor. Press BA'FFERY REFRESH. 1 The CHARGE Lamp flashes during discharge then stays lit until charging is complete.
Supplying Power DC Power Cable Connect POWER I ,.,_- ,L, _ '' Lamp i | AC Adaptor to P._ DC Power Cable. . VCR DC OUT with supplied °nnec'°r') ,,,___,,,_ L. ! _ VCR DC OUT Connector (_ _ ,_ Plugin AC Adaptor. Notes: • AC Adaptor cannot power Camcorder while charging Battery. • When not in use, unplug AC Adaptor from AC outlet. (Adaptor uses 1.2 W of electricity while plugged in.) CAUTION: This unit will operate on 110/120/220/240V AC.
Cassette Information flIP. 'I,-'[,,."[_| _':'JJll i I.."[=-]hl| [o] iYl ;{=-] i'I [olVP. III Turn Tape Wheel in direction of arrow until there is no slack. Attach Batte__r_(page 10). 3 Insert cassette as shown. Slide Press TAPE here to EJECT close door. to open door. • To remove the cassette, TAPE EJECT switch. II-"(_o] slide the arofA:,i LI_'_3 m_[_ :111.1 =. [=.=m Use tapes with the _ Tape Speed Selector Position SP (StandardPlay) SLP (Super Long Play) TAPE SPEED mark in this unit.
Attaching Shoulder Strap Remove Battery Pack before doing steps. 1 Undo strap ends from buckles. Thread strap ends through Strap Rings on Camcorder. Re-insert buckles. the strap ends into min. 1 inch (25.4mm) 1 Pull a loop of strap from buckle. Pull strap tight to shorten or lengthen. Adjust Hand Strap length to fit your hand as shown. 14 i Io] m=k'F=tk'_e.na[0(_PUmniiIt:{ I1ll_-i i B ".
MENU Mode Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. 1 Press MENU for MENU ---MENU--- PAGE 1Q_ PROGRAMMBD Tm.E REC ;_ TAI&YI_I ml,4 mode. E ; ON L_8_ CT:: PUSH PU_4 "/'_W NB_IU _ 2 Press PU_P__A.or DOWNV highlight menu item. 3 Press DISPLAY 4 Press MENU to exit. L _ to to set selection.
MENU Mode f--- MENU--- PAGE 1/2_ 1 2--... • PROGRAMMED REC 3-4J 5J • TITLE ; AUTO/MANUAL • TALLY LAMP ; ON • STAND-BY RELEASE ; OFF • CLOCK SET SELECT : PUSH V/A KEY SET : PUSH DISPLAY KEY END : PUSH MENU KEY ,, 6_ 7m J 2 TITLE (pages 39-41). AUTO/MANUAL PHRASE , PAGE 2/2_ • TIME LAPSE ; OFF - SECURITY ; OFF VIDEO EFFECTS ; FADE BLACK 5 • SELECT : PUSH •/• KEY SET : PUSH DISPLAY KEY END : 16 items : 10 items 3 TALLY LAMP (page 32). I f PROGRAMMED REC (page24).
Setting the Clock Set the following items in order: Time Zone, Daylight I_,_ i i li[+ I iil/rii[14,l Saving Time, Date and Time. Before you begin... ill The Camcorder is preset to Eastern time. To change time zone, do steps at right. • Connect Camcorder to power source, • Set POWER to CAMERA. i Note: • Setting POWER to VCR also displays • CLOCK SET menu. Clock may loseor gain up to 2 minutes per month. To adjust, see page 19. 1 3,4 O Press MENU for MENU mode.
Setting the Clock |_'ITi _ I_ Before you begin... I'11[_,'_-| I i[| • I I i| [,_II • Connect Camcorder to power source. • Set POWER to CAMERA. Clock will auto-adjust to daylight-saving time (DST). E Note: I* When POWER is set to VCR, CLOCK SET / menu appears. _o Auto DST does not function if time zone is | set to Hawaii or Samoa (page 17). 1 Press MENU for MENU mode. Press Up___& or DOWNY to select [e,]Ko[e,]_l,.'_¢id ..- MENU --. PAGE tQ_ PROGRAMMEDREC Tm.
Setting the Clock I-'l'_ | | I iT! n I]_'I (_l_.liT. ill, Before you begin... i[;II Date and time including leap year are calculated up to DEC 31,2097. • Connect Camcorder to power source. • Set POWER to CAMERA. ..=e: When POWER is set to VCR, CLOCK SET menu appears. Press MENU for MENU mode. Press UP& or W_ _oI_ I,'[11 to select TALLY IJddP ; ON ;OR = ,2,3,4 OCD 2 : l_l_.l DIIIFI.AY I_'Y : PI.lltH MBilJ KEY Press DISPLAY for CLOCK SET menu. Press UP& or DOWNY to selectr_J_l"J_.
Built-in Auto Light ll_li[_ lIi[4 For recording Before you begin... Ir_l]i • Connect Camcorder to power source. • Set POWER to CAMERA. in dim lighting. Set LIGHT to AUTO. Light turns on/off automatically according to lighting conditions. Or, set LIGHT to ON/OFF manually. _E>appears in EVF when Light is on. Caution: [ Light becomes hot. Never cover Light while on. 12:00:00AM 1 1999 Before you begin... • Order Part No. VULS0001 (VLLW0015 and cushions) for replacement bulb unit.
Camera Recording Before you begin... Built-in Twin Capsule 2-Way Microphone System • connect Camcorder to power source. • Insert cassette with record tab (page 13). JR -I Set POWER to CAMERA. Lens Cover opens. 2 EVF • Be sure POWER is fully turned CAMERA position. Tally Lamp 2 3 1 5 4 3 5 to Record/Pause mode. Look into Viewfinder and adjust Vision Adjustment control to your eyesight. Slide TAPE _SPEED to SP or SLP (page 13). Press RECORD/PAUSE to start or pause recording.
Camera Recording If left in RECORD/PAUSE mode for 5 minutes, Camcorder switches to Stand-by mode to conserve battery. When set to ON, Stand-by Quick Release lets you resume recording by pressing RECORD/PAUSE two times. New camcorders will default to OFF. Before you begin... • Connect Camcorder to power source. • Insert cassette with record tab (page 13). Set W to AM . Press MENU for MENU Press _ mode. or W_ RECORD/ PAUSE to select --- MENU--PRGGRAMMEO Tm.
Camera Recording Before you begin... For a smooth transition between scenes if recording is stopped, and then started within 24 hours. • Connect Camcorder to power source. • Insert cassette with record tab (page 13). Press RECORD/PAUSE to stop recording. Set POWER to OFF and leave cassette in Camcorder. 3 4 To resume recording, set to CAMERA, Press B,_ to resume recording. Note: 2 H LTA _.lat! _.ti _.L'Mi _ 3 • Use Manual Easy Edit (below) if more than 24 hours before recording is resumed.
Camera Recording i :dioI_ I_l ill li[_o ii ;[_,Ie] Iolil[e i Before you begin,., Set a recording start and stop time. Or, set a 5 or 10 second interval recording to be done each minute. • Connect Camcorder to power source. Use AC Adaptor for longer recordings. • Insert cassette with record tab (page 13). • Set POWER to CAMERA. 1 1,2, Press _ for MENU mode. Press UP& or DOWNY to select TALLy LAMP ; ON _;OFF SET D 2 Press DISPLAY. displayed.) Each additional increases start time by 30 ,,,,, ,,.,,.
Playing Back Recordings Before you begin... • connect Camcorder to power source. • Insert recorded tape. 1 2 Set POWER to VCR. • If tape has no record tab, auto playback begins. Playback O _ _) PLAY (_ STOP function buttons. : rewind tape. : play tape. : stop tape. Quick Visual Search Search Speed SP (Standard Play) : 3 times normal. SLP (Super Long Play) : 9 times normal. During playback, press: FF : fast forward search REW : rewind search Press again or PLAY for normal play.
Playing Back Recordings • uITJl -J m Connect Before you begin... _h [a.]:q[o] IfJ [:-lvlv|I i[0 i Camcorder to a IV • Connect Camcorder to power source. • Make all TV-Camcorder connections. to view playback or recordings in progress. _TV with AUDIO/VIDEO IN Jacks. 71 2 Set POWER to: VCR _ view playback. CAMERA _ view picture as it is recorded. Turn TV ON and set to LINE INPUT. See TV owner's manual. To Audio Begin playback or recording.
Playing Back Recordings in a VCR i =[oP..T, i'-m | (=]/vl I-_i tJP_ "._ :i Remove battery. Battery lid and insert AA • Do not reverse polarity. • Replace battery when tape loading/ unloading takes longer than usual. 1 2 Turn [_ in direction slack. cassette Tape Wheel of arrow to take up any Slide RELEASE to open cassette lid, Insert the _ cassette with the window up and on the left, then lid shut.
Copying your Tapes (dubbing) Before you begin... • Make Camcorder-VCR connections (see left). • Turn both units on. • Set VCR input signal to LINE. Please see VCR owner's manual. • Set Camcorder POWER to VCR. Source (Playing) Camcorder 1 Insert a pre-recorded tape into Camcorder and a blank tape with record tab into VCR. 2 Press PLAY on Camcorder, then press STILL at starting point. Press REC, then STILLJPAUSE VCR.
Power Zoom / Backlight Before you begin... Zoom in (close up) and out (wide angle) in one of four speeds ranging from slow (16 sec.) to fast (2 sec.). • Connect Camcorder to power source. • Set POWER to CAMERA. Zoom In ("T") Zoom Out ("W") Zoom slowly: Lightly press "3" (telephoto_ or ._ POWER ZOOM button. Zoom quickly: Apply more pressure to the button. Before you begin... Use when subject is darker than surroundings, in shadowed area, or in front • Connect Camcorder to power source.
Focus Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. Camcorder automatically focuses on subject even during zooming. Auto Focus is on when "MP MANUAL FOCUS Use Manual Focus (MF) when : • recording through glass. • lighting is poor. • subject is far away with objects in foreground. • subject has distinct horizontal lines. is not disptayed in EVF. Push to remove "MF" in EVF if necessary. * • • • • subject is not centered in Viewfinder. subject has shiny surface.
High Speed Shutter Improves Still or Slow Motion playback picture of high speed subjects stroke), when viewed on Camcorder or 3 or 4 head VCR. (e.g. a tennis Before you begin... • Connect Csmcorder to power source. • Set POWER to CAMERA. • Insert cassette with record tab (page 13). , 131 [,.']11111[L In AUTO mode (no indication in EVF), shutter speed is auto-adjusted according to subject brightness. • AUTO mode is selected _tjP.! il! f;.I J_'_ each time POWER from 1/60 to 1/350 is set to CAMERA.
Tally Lamp The tally lamp can be set to come on or stay off during recording. New camcorder's default setting is ON, Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. • Insert cassette with record tab (page 13). Press MENU for MENU mode. Press _ or _ _lllfll iW_llVJl'J --- to select MEENU --- pROG_ 2 Press _ ON 32 Lamp _ Ja]i+" l"'l"ll"'t I";I i I_°']P: 3 _ lamp lights during nuil I;llTll¥'Jilh Press M_ ! 1/2 to select: OFF _ lamp stays off. ..
Fade In/Out Before you begin... An interesting way to open and close scanes. • Connect Camcorder to power source. • Set POWER to CAMERA. Press MENU 1,234 for ( . .E.Umode.I_=-,- Press UP& D__J__to 2 or I selectls_-_r: Press __ 3 RECORD/ PAUSE Press DISPLAY COLOR__select Press B_menu't° or select BLACK or WHITE. 4 / ' "LACK| Pus. ,_._ / for VIDEO EFFECTS menu. f Press UPA or | to select | FADE P,_ _ -.- v=_o _ ..
Fade Before you begin... Choose from 7 fade effects in 8 different colors. • Connect Camcorder to power source. • Set POWER to CAMERA. Press_for I • MENU I_: P_s_ 11ME I._PSE ; OFF mode. FADE Press UPA or J' _ DOWNV to select laazcr: _s, ,i._-v O / J J o Press DISPLAY for VIDEO EFFECTS ___ menu. Press DOWNY to select ss._: _. :_ Press DISPLAY 6 rl SHR r,J MSC SFT r-_ SHR _STR FADE menu. Press _ or DOWNY to selectr_[_J'=l. Press DI._:)LAY for TYPE menu.
Digital Zoom Power Zoom magnification is digitally increased. Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. 1 2 Press .P_ J_G.LT_ _,_QM. D.ZOOM mode (150x maximum). Higher digital magnification levels may cause picture distortion. 2 Hold down .... n P W Digital Zoom starts when normal zoom reaches maximum (26×). , Zoom level appears in EVF. • POWER ZOOM switch controls digital zoom level. • Normal zoom resumes when level falls to 26x.
Digital E.L$. Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. Helps stabilize picture when recording unstable situations. in 1 Press EVF. EIS to display "EIS" in the • Image becomes slightly enlarged and shutter speed auto-adjusts from 1/80 to 1/350 according to brightness. • Use High Speed Shutter (page 31) if needed. Shutter speed setting remains after EIS is canceled. 2 1,2 Press EIS again to cancel when not in use. E.I.S. may not function during...
Security Mode Before you begin.,. • Connect Camcorder to power source. Use AC Adaptor for longer recordings. • insert cassette with record tab (page 13). • Set POWER to CAMERA. • Securely position and aim Camcorder. 1,2,3 Press MENU for I J, P_ _'_ 11ME MENU mode. ; OFF ! to selectlsaz.cr,pus,w,_zx / SET _ P_J_I O4SP_YKEY Press DISPLAY for SECURITY menu.
Time Lapse This feature reduces with TC-40 tape). tape speed to 1/3 SLP for long term period recording (up to 6 hours Before you begin... • Connect Camcorder to power source. 1 , 2, 3 use AC Adaptor for longer recordings. • Insert cassette with record tab (page 13). • Set POWER to CAMERA. • Slide TAPE SPEED to SLP. Press MENU for MENU mode. Press UPA or DOWNY to select OFFPAGE2/2 SELECT: PUSH V/A KL_'Y SET : PUSH DISPLAy KEY : FU6H MENU KEY 4 Press DISPLAY TIME LAPSE; to select ON.
Intelligent Titler I;I[1_ (,], _.l i [_/ii [-.I Before you begin... Camcorder auto-displays title greeting selected holidays when power is first turned on. See title list on page 40. on • Connect Camcorder to power source. • Set POWER to CAMERA. • insert cassette with record tab (page 13). 1 Press MENU for MENU mode. Press UPA or _ to select m --- MENU--- PROG_ 0 o PAGE 1/2_ REC : AUIX_AANUN. TALLY LAMP _C_._Y 8Er 2 Press DISPLAY MANUAL. ; ON REt.E/d;E ;OFF : PUSH DE.
Intelligent Titler Automatic/Manual Title Display List Dec. 31-Jan. 1 Feb. 14 2nd Sunday in May Last Monday in May 3rd Sunday in Jun. Jul. 4 1st Monday Oct. 31 in Sep. 4th Thursday Dec. 24-25 in Nov. These Titles must be displayed _ manually.
Intelligent Titler Before you begin... • Connect Camcorder to power source. • Set POWER to CAMERA. • Insert cassette with record tab (page 13). 1,2,3 1 Press MENU for MENU mode. Press UP& or DOWNY to select U _ED REC STANO-SY_ ;OFF SELECT: PUSH VI& KEY D 2 3 4 6 5 5 6 Press P_ D Press : PU,_ ME_IU _ to select PHRASE. MENU to exit. In Pause (Record mode), press repeatedly to display phrases from list below, left. To record the phrases, Press Press _ while remove phrase.
Electronic Viewfinder Indications Tape remaining and battery charge level can be displayed. 1 set 2 Press DISPLAY repeatedly to select the following displays. I 1 Fifth I ,x_=..= pr_ _ _111_ Jd_P ress (Initial screen) 1 IX Fourth press RE_ 1 "_l I First j_112:00Nd 1X--imlllliD 1 lliQO ,_ II I_ Second RP" press .em.
Electronic Viewfinder Indications lie,]h1_Vd ::1-"[,TAvLo,] -"m=[,L;[:._ 1 2 3 []_lll--I_DIMFIOI [D.ZOOM] 5 IVCR-MODE] 12:00:OOAML, JAN 1 1 9991 1 Bakery Remaining _E=::_:3._(page 42) pll,_ 'WARNING LOW BATTERY" appears and External Power Lamp starts flashing 15 seconds before Camcorder shutoff. 2 Tape Remaining • If cassette is not inserted or has no 4 TAPE SPEED (pages 13, 21, 38) (SP=standard play, SLP=super long play, T.LAPSE=time lapse).
Electronic Viewfinder Indications I[__'1kvjI=I'__,VAvL_-" i i=[.I, [;]m 1 2 _ L'--t, 10:201SLPI /9 3 _D.ZOOM1 I_DIM F I Or 10 11 12 1VC R- i OD-E II 4,5,6,7 --13 m ._12:00:OOAML, JAN 1 1999J 1 Zoom Magnification 2 Digital E.I.S. (page 36). level (page 29). 3 Digital Zoom (page 35). 4 VCR-MODE Appears 1 minute when POWER set to VCR or if RECORD/PAUSE is is pressed in VCR mode. 5 --14 9 10 11 12 13 14 Backlight Manual (page 29). Focus (page 30). Light ON/OFF (page 20).
Operation Notes 1-I IRT;I ='tum[,ei_l';'jl[,] 0_11all (=]t.t;.t m[, II =[=]i_.-[:_-lm Remove the Lens Hood by turning it counterclockwise. Then attach an optional filter or lens. • Be careful not to touch the lens itself. A • Replace the Lens Hood after removing the accessory. i I[:.1l[,.-ll -J[*[*Ti |=-! i[:_,ilJ i[:4 if:,ill*] ii1_= t! il [o] i I With a Wide or Telephoto conversion lens (optional) attached, the four corners of the screen may darken when zoom is set to maximum wide angle.
Replacing Clock Battery The clock battery necessary. is pre-installed. Follow the steps below if replacement becomes Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another battery may present a risk of fire or explosion. Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep l aWARNING: 1 way from children. Do not recharge, disassemble or dispose of in fire. Ed[Vl"__'A Tripod Mounting Hole While pinching Tray out.
Palmcorder Accessory For ordering instructions, see the Accessory Order Form page. • The listed standard battery use times are based on continuous Palmcorder. Accessory PV-A17 HHR-V214 # Figure .<._ __ recording using this Description $130.00 6.0Ah/6 hr Battery Pack with Universal Battery Charger $200.00 $60.00 _ 3.0Ah / 3 hr Battery PV-BP17/ _ 2.4Ah / 2 hr 30 min P-V214 _ Battery PV-BP18/ _ 1.8Ah / 2 hr P-V611 _ Battery PV-BP15/ _ 1.
Palmcorder Accessory Please photocopy 1. Palmcorder this form when placing Order Form an order. Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 5.00 Total Enclosed 3. Method of payment (check one) [] Check or Money Order enclosed (NO C.O.D.
Specifications Power Source: Audio: Compact VHS Camcorder: DC 6V AC Adaptor: 110/120/220/240V AC, 50/60 Hz Battery: Nickel-Cadmium Type DC 6V Compact VHS Camcorder: 6V DC 6.0 W (Max. 9.0 W) AC Adaptor: 24W 1,2W (when not in use.) EIA Standard (525 lines, 60 fields) NTSC color signal 2 rotary heads plus flying erase head.
Before Requesting Service It a problem arises, you may be able to correct it yourself. See Symptom and Correction list below. Symptom Correction No picturein EVF ... • • • • • Video cassettecannotbe inserted... • ConnectPower Source.(pp. 10, 12) • Insertcassette,windowside facing out. (p. 13) Video cassettecannotbe removed.... Connect PowerSource. (pp. 10, 12) Set POWER to VCR or CAMERA. (pp. 21, 25) Checkfor Dew Indication.(p. 44) Use fullychargedBattery.(p. 10) Firmlyconnectall neededcables.(p.
Request for Service Notice Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. • Please include your proof of purchase. (Failure to due so will delay your repair.) Request forService Notice: • To further speed your repair please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 1705 N.
Warranty Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. Ave. 65 de Infanteria. Kin. 9.
Warranty 1-800-332-5368 (Customer Orders Only ) Panasonlc Services Company 20421 84th Avenue South, Kent, WA 98032 (6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PeT) (Visa, MasterCard, Discover Card, American Express, Check) Centralized MAIL TO : Factory Servicenter Panasonic Services Company 1705N.Randall Road, Elgin, IL 60123-7847 Attention: Camcorder Repair Please carefully pack and ship, prepaid and insured, to the Elgin centralized repair Factory Servicenter.
Index A H AC Adaptor 12 Accessories (Optional) 47 2 Accessories (Supplied) Audio/Video Cable 26, 28 Audio/Video Out 26, 28 Auto Daylight 18 Saving Time Hand Strap High Speed Shutter HIGH SPEED SHU'I-rER Button B T Lens Cover Light LIGHT Switch C PLAY Button Playback DC IN 12 DC Power Cable 12 36 Digital E.I.S.
