Manual

Please make all cable or antenna connections before powering on.

For ANT./Cable

Connect the cable from

AntennalCable to the VHF/UHF

terminal on the unit.

For DSSICab|e Box

Connect the OUT jack on your

cable box to the VHF/UHF

terminal on the unit with a RF

cable.

WARNING: ....

Overtightening Nut type RF coaxial cables

may damage jacks, Finger t ghten only,

Press Combo on the remote for Combo

mode.

Plug the unit power cord into an

AC wall outlet.

Press Power* on the remote or

unit. The unit comes on and auto

channel and clock set starts,

UNIT

VHF/UHF

Cable TV

Converter Box

ANT./CABLE

Settingsare made

automatically. When setup is

done, this screen appears.

• if you use a cable box, turn it on and set it to the

Public Broadcasting Service (PBS) channel in

your time zone, If you use a DSS reciever, it

must be turned off,

If AUTO CLOCK SET (S

INCOMPLETE screen

appears, set the clock using

MANUAL CLOCK SET

procedure as below.