Manual

Press DISPLAY
to display or remove the overlay.
Channel Caption
(See page 28,)
Function Status
_\ Current Time Counter
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to "OFF" (see
page 27), the screen will turn solid blue.
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
Receivable Broadcast Tape Speed
Types (See page 15,)
(For model PV-C2062 only)
Warning and Instruction Displays These displays will alert you to a missed
operation or provide further instructions.
[0,!_!gt'_l
• If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
• If you press REC, and a cassette is inserted with 3, 12
no record tab...
• If you press STOP during a Timer Recording... 23
• If you press PLAY, FF, REW, or REC without a 12
cassette inserted...
• If the unit is not in Stop mode or a cassette with 22, 23
record tab is not inserted two minutes before a
Timer Recording is about to begin...
• If head cleaning becomes necessary while playing 4
back a tape...
Y _rLOCKACTIVATED • If you pressa functionbutton otherthan STOP/EJECT 27
or POWERwhilethe unitis in VCR Lockmode...
34