Manual

Cancel a Timer Recording: /
(Recording is in progress) /
Hold down STOP for a few seconds #1
to cancel the Timer Recording. /
• Any future daily or weekly recordings
w be performed as programmed.
Repeat steps 1 and 2 on page 22.
Press AV to select
the desired program.
@
G3 G:3 _!
GE3QD _3D
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
\PROG
ADD/DLT
STOP
3
To Replace program...
1) Press • to display.
2) Press AV to select
and press • or •
to set new program
contents.
3) Press PROG (or
ACTION).
To Clear program...
Press ADD/DLT.
Press PROG twice (or ACTION)
to exit this mode.
I
Model PV-C2062 remote shown.
• 2 minutes before Timer recording is performed,
"PLEASE PREPARE FOR TIMER REC" appears and/
or the PROG TIMER Indicator flashes. Be sure a
cassette with record tab is loaded and the unit is in
Stop mode.
• If the start times of two programs overlap, the lower
numbered program will have priority.
• If the start time for a Timer Recording comes up during
a normal recording or One Touch Recording (page 12),
the Timer Recording will not be performed.
• If there is a power interruption of more than one minute,
the recording may not be performed or continued.
• If "INCOMPLETE" appears after all items have been
set, check all entries and make necessary corrections.
23