Manual

You can set up to 8 programs to be recorded while
you are away,
Press PROG* to display SET PROGRAM
screen.
2
1)Press Ay to select
TIMER
PROGRAMMING.
2) Press • to display
screen.
• If a program is already in
memory, press &V, and
II. to select an unused
program number.
Press Ai,_l'to select
and • or 4 to set the
recording DATE.
• 1~3"_=Onetime
• DALLY = MON~FRI
• WEEKLY SUN-SAT
= Same time once a week
.s-9 ........31-
Today's--_ SELECTA l, Se_ion Order DAILY
Date _.=WEE_LY.... _F-EKLY WE_.KLYJ
-- /SAT) "" (MON__ (SUN)
Repeat step 3 to set:
• start time, atop time
• Channel (or LINE for outside south;e}
• Speed (SP, LP, SLP)
Press PROG (or
ACTION) to end the
program.
To Enter More Programs,
press &_' to select
and • to set a blank
program number, and
then repeat step 3.
Press PROG twice (or ACTION)
to exit this mode.
• If you're using a cable box, make sure that it is
tunedto the desired channel and the power is
le_,on for timer recordir_g,
• PROG TIMER indicator lights on the unit,
E_ Ready Check List
[] All connections are made.
[] Your unit is plugged in.
[] The clock is set to corTeet time.
[] The tape is long enough.
[] The record tab is in place.
PROG TIMER indicator
__Timer Recording Using __
unit Buttons
You can set a Timer Recording
using ACTION key on the unit,
(See page 11.)
VOI. OH _TOPIF4ECT REWI_
eeee F:IE]
*-- ACTkON--*
_] Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
Press _t,Y + - to select 'VCR"
and STOP/EJECT and REW
together to display SET UP
VCR screen,
_, Press &_' to select "TIMER
PROGRAM" and + to display
the TIMER PROGRAM screen.
Repeat main steps 3 ~ 5.
22