Manual

For Model PV-C2062 only
Equipped with _loz_ -TV Noise
Reduction for true MTS
reproduction, db_ -TV Noise
Reduction is required for good
stereo separation and audio
fidelity, ,-I_z_ is a registered
trademark, and is licensed by _}_z®
. Technology Licensing.
POWER, _ _ _ RAPID
MUTE-- _ _ _ TUNE
VOL_ _ >CH&V
UP/DOWN
_D
I
_ _o[L NUMBER
OD _D Keys
100 KEY _GD_
_'_"_ _ _ DISPLAY
_ AUDIO
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated with
an ° [.to"mark while the selected audio mode is indicated with an
arrow. To change the audio mode for these broadcasts, see the
"Select Audio Mode for TV Viewing" section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts ere
being received simultaneously. Select
the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast, Select STEREO audio mode.
• if stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results.
_iiiil)!iii !!!i_!_i;_;ii_i:ii!i;_ii_!¸
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
Normal monaural sound broadcast.
Press AUDIO to select the desired audio mode as described above.
(Arrow shows selection,)
• Eachpressof AUDIOwillchanget,heaudiomodeasshownbelow.
• "SAP" is selected with first press of AUDIO.
< Example >
IMPORTANT NOTE:
• This stereo system is designed for TV viewing only. Recording
and playback will always be in monaural. 15