Manual

*Important: If a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
Connections you'll need to make.
Recording (Editing) unit
Playing (Source) VCR
1
2
Insert pre-
recorded tape.
Insert blank tape with
record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
[_ Press PLAY then _-_ Press REC, then
PAUSEPAUSE at starting _ PAUSE/SLOW
point to put in immediately to put in
Standby mode. Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4
Press PLAY
to start dubbing.
PNJSE
Press PAUSE/SLOW
to start dubbing.
5
Press STOP
to stop dubbing.
P_0
Press STOP
to stop dubbing.
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Method 1:
Press OH AY. The display will change as follows.
a Press ACTION for MAIN MENU.
b Press AV<I • to select "TV', then press
ACTION for SET UP TV screen.
c Press AV to select 'INPUT SELECT," and
then press • to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
13