nason/c Palrnco dc TM Camcorder Operating Instructions PV-53 [v.sl_ Consists of PV-53D/PV-A16 Before attempting to connect, operate or adjust this product, please read these instructions completely. Spanish Quick Use Guide is included. Gufa para rapida consulta en espa5ol esta_incluida.
Thank you for choosing Panasonic! You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. Please take time to fill in the information at right. The serial number is on the tag located on the underside of your Palmcorder. Be sure to retain this manual as your convenient Palmcorder information source. _Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No.
1. Read Instructions -- All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions -- The safety and operating instructions should be retained for future reference. 3. Heed Warnings -- All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions -- All operating and maintenance instructions should be followed. 5. Cleaning -- Unplug this video unit from the wall outlet before cleaning.
14. Lightning -- For added protection of this video unit receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video unit due to lightning and power-line surges. 15.
Getting Started Things You Should Know ........................................................................................................ 2 Important Safeguards and Precautions .............................................................................. 3 Palmcorder Accessory System ............................................................................................. 6 Attaching the shoulder strap ...............................................................................................
For more information and ordering instructions see the separate Selection Guide and Accessory Order Form.
1 Pinch the tabs together on either side of the clasp and open the buckle. 2 Unhook the strap from the Buckle Catch. 3 Thread the strap ends through the Strap Attachment Rings. Then re-hook them onto the Buckle Catch. 4 Snap the clasp shut to lock the strap in place. Pull a loop of the strap loose from the buckle, then pull the strap firmly through the buckle to adjust the length.
Use tapes with the _[_ Tape Speed Selector Position T-20 Cassette type T-30 mark in this unit. T-40 SP (Standard Play) 20 Minutes 30 Minutes 40 Minutes SLP (Super Long Play) One Hour One Hour 30 Minutes Two Hours The Palmcorder may be ON or OFF when you insert or remove a cassette. 1 Turn the Tape Wheel in the direction of the arrow until there is no slack. 2 ,.., EJECT Slide the EJECT switch to open the door.
1 Plug in the AC Adaptor. _EH_ REFRESH POWER 2 CHARGE o Power Indicator lights up. Insert the Battery Slide the top of the Battery forward then press down and release. • The Battery Pack should charge in about 2 hours. BATTERY Indicator REFRESH POWER CHARGE Charge Indicator lights up. (A) Remove the Battery (A) Slide Battery forward. (B)Lift up and out. BATTERY REFRESH POWER C o CHARGE 0 Charge Indicator goes out when charging is done. (About two hours.
This feature allows you to completely discharge the power from the Battery Pack before recharging. It is recommended to use this feature after about every 5 charges to keep your Battery in top operating condition. 1 Place the Battery into the AC Adaptor. BATTERY REFRESH 2 J,czm Press the BATTERY REFRESH button. The Charging indicator will flash and discharging will begin. When discharging is complete, the indicator will stop flashing.
] Connect the DC Output on the AC Adaptor to the DC Input on the Palmcorder with the DC Power Cable (supplied). 2 DC Plug in the AC Adaptor. • The Power indicator will light up. ] Connect a PV-C16 Car Battery Cord to the DO Input of the Palmcorder. 2 Start your car engine and then insert the Car Battery Cord plug into your cigarette lighter socket. hter Socket • There is a fuse located in the lighter plug end of the cord. Should fuse replacement be necessary use the exact current rating (in amps).
i_iiii_i! _ i __/ _, il¸ !_! i_ii_ _i_ii!_ii ¸_!i_:i_i NORMAL AUTO LOCK --_ When the AUTO LOCK switch is set to the AUTO LOCK position, the white balance and focus are automatically adjusted while the more advanced features listed below are locked. Auto Lock is especially helpful for the first time Palmcorder user and ensures "point and shoot" operation under most conditions.
Thedateandtimeiscalculated, includingleap year,uptoDec.31,2089.Thisfunction operatesona miniature battery(supplied) even whenthePalmcorder is OFF. 1 While pinching the stopper tabs together, pull the tray out of the Battery Compartment. 2 Insert the battery (supplied) into the Battery tray with the @mark facing down. • Do not reverse the polarity. .... REPLACE BA-I-FERY WITH PANASONIC PART NO. VSBW0004 (CR2025) ONLY. USE OF ANOTHER BATTERY MAY PRESENT A RISK OF FIRE OR EXPLOSION.
POWER VCR OFF CAMERA Set the POWER switch to CAMERA. AUTO LOCK -_ Set the AUTO LOCK switch to "NORMAL." Press DATE/TIME in / Record/Pause mode to I AM12:00 display the date and time.\ aA" 1 1993 &6 2 SEL the first portion flashing. P_ressSEL(ect) to start IA SET 5 _ M_I'_..00 \aA..11993 Press SET repeatedly (or hold down) to enter the desired numbers. Then press SEL(ect) to fix that portion and move to the next. I I day Repeat hour, minute, month, anduntil year the have been entered.
Here are some of the basic indications which appear in the Palmcorder EVF. They will not be recorded on the tape. REC REC (record) !iiiiiiiiii!iiiiii!!il ¸_i:iiiiii _¸_¸¸"¸ iii¸?_i iiiiiiii:_i_iiiiilill _?!i i _!! i ii !ii,_ii¸ FF (fast forward) PLAY REW (rewind) E m _ F F _ E-E-\x - E !: i_!!iiii_i_ iiiiiiiii_i_ii:iiiill ! iiiiiiiiiii!!_ ¸ _. _ _.__11! __!ili_ _ii_i_!!; ¸ // F ,, ,, I .- .F -BATTERY 'I I / /,_l_,/\\ / II \// \ F _ BATTERY \\ // I \\ "E - - - F" appears when the Battery Pac
Use to brighten the natural colors in a scene. 1 Slide Light into built-in Light Mount. Be sure the Light locks into place. RELEASE] bu_on j' 2 LIGHT Press Light button ON. To remove the Light: RELEASE Press the LIGHT RELEASE button and slide the Light off. CAUTION: This light becomes hot during operation. Turn screw counterclockwise on the underside of the reflector casing and remove. ...........
Before you begin... • Connect the Palmcorder to a power source (Battery Pack, AC Adaptor or Car Battery Cord.) • Insert a cassette with Record Tab (see page 8). EVF POWER sP 1 ((Io VCR OFF CAMERA Set the POWER switch to CAMERA. Underside View 2 _ ._r_----_=_ J Palmcorder goes intoRecord/ Pause mode" I 14 TIl_-----_Jr "-_visi°n [ [---_ 'I'L_ /I =====_=_ (A) Fully extend viewfinder. (B) Adjust the Vision Adjustment Knob to you r eyesight.
If you stop recording but plan to resume within 24 hours, you can use the Edit Standby feature to make a smooth transition between scenes. Set the POWER switch to OFF and leave the cassette in the Palmcorder. Press RECORD/PAUSE (within 24 hours) to continue recording. Note: If it is longer than 24 hours before you resume recording, use the manual Easy Edit feature described below.
Operatethemajorfunctions ofyourPalmcorder froma distanceofupto 16feet(approx.) with thisconvenient remotecontrol. REPLACE BATTERY WITH PANASONIC PART NO. VSBW0004 (CR2025) ONLY. USE OF ANOTHER BA'I-I-ERY MAY PRESENT A RISK OF FIRE OR EXPLOSION. CAUTION-BATTERY MAY EXPLODE IF MISTREATED. DISPOSE OF USED BATTERY PROMPTLY. KEEP AWAY FROM CHILDREN. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE. _While pinching the stopper tab, ® pull the Battery Tray out.
Before you begin... • Connect the Palmcorder to a power source. • Insert a cassette. • Fully extend the Viewfinder. VCR OFF CAMERA Set the POWER switch to VCR. REW Press REW/SEARCH to rewind the tape. ORWAR_J \ O A.DUB O V.DUB _ COUNTER Press PLAY to start playback. AST STOP "_ _i_iiii;i_ i Press STOP to stop playback. ......... ii 2 3 4 (Sound is Muted) Rapidly Locate a Segment Press PLAY to start playback, then press FAST FORWARD or REWIND to start a rapid visual search.
o Remove the Battery Compartment lid and insert an AA size battery. • Make sure polarities are aligned properly. • When tape loading and unloading time becomes longer than normal, battery replacement is necessary. eq 1 JL 2 Turn the Tape Wheel on the J_vHsr-',;J cassette in the direction of the arrow to take up any slack before placing the cassette in the PlayPak. Slide the RELEASE button to open the PlayPak door.
Your Palmcorder may be connected to a TV to play back tapes or to monitor what you are recording. 1 Back of TV[_ Connect your Palmcorder to a power source (Battery Pack, AC Adaptor, or Car Battery cord). To AudioNideo In 2 Video Cable (suplied) POWER VCR OFF CAMERA Set the POWER switch to VCR to playback a tape. Or set to CAMERA to monitor what your Palmcorder is recording. 3 To Audio/Video Out Turn the TV ON and set it to LINE INPUT.
I Top View_ ' O A,DU8 " O V,OUB COUNTER (KD REW _1 t.._.____ PLAY FF STOP STILL / The Tape and l-irne Counter displays can be selected to track your current position, or find a desired tape location. SEARCH --J Press the DISPLAY button repeatedly to select the desired display. Fifth press _ % Tape Counter: A reading is displayed for any position on the tape. Press the RESET button to reset display to "0000".
You can control the zoom speed for close ups or wide angle shots. The zooming speed ranges from a gradual speed of 15 seconds to a fast 3 seconds according to the pressure applied to the zoom buttons. Zoom slowly by lightly pressing the 'q-" (Telephoto) or the '_V" (Wide Angle) side of the POWER ZOOM switch. Zoom Out ("W") Zoom quickly by applying more pressure. Digital Auto Shutter AUTO-H.S.S. In AUTO H.S.S.
The Palmcorder will automatically bring the subject into focus even during zooming. Press the FOCUS button so that the letters "MF" do not appear in the EVF. 1 AUTO LOCK--_ Set the AUTO LOCi( switch to "NORMAL." t FOCUS AiM Press FOCUS so that "MF" (Manual Focus) appears in the EVF. Press and hold the "T" side of the POWER ZOOM switch until the subject to be recorded is at maximum zoom-in. Turn the oo (FAR)/NEAR picture is in focus.
No EVF '_ IndicationJ Use for continuous color balance in both indoor and outdoor lighting situations. When the AUTO LOCK switch is to "AUTO LOCK," or when there is no EVF indication, AUTO White Balance is selected. Use under the conditions described below. 1 AUTO LOCK_ Set the AUTO LOCK switch to "NORMAL." WB 2 Press WHITE BALANCE repeatedly to select one of the following settings. Select" EVF Indication -_O._" OUTDOOR when recording outdoor scenes from indoors, or outdoors with an amber filter.
EVFIndication - INDEX _/l\ I _\1/4 1 An invisible index mark is automatically placed on the tape at the beginning of each recording (the Index indicator will flash). Then, you can enjoy automatic review and playback of indexed tapes using Panasonic VCR models which feature the VHS Index Search System. • No mark is placed where a recording resumes after the Palmcorder has been put into Pause.
(__NORMAL LocK--_ AUTO Set the AUTO LOCK switch to "NORMAL." - HOLD--_ 2 MODE SEL Press HOLD/MODE SEL repeatedly to select the desired fade effect. (no indication) black • Other than "BLACK", the mode selected will appear in the EVF. f WHITE (white) L'I SFT (soft) =1 SHR r_ MSC (mosaic) SFT (soft) r-_ .,, WHT_ FADE SHR (sharp) STR (stripe) "-"..':- RDM m Press COLOR repeatedly to select the desired Color for Digital Fade effects other than Black and White.
Before you begin... • Set the POWER switch to CAMERA. This feature allows you to increase the magnification of the Power Zoom. Set the AUTO LOCK switch to "NORMAL." 2 _D'ZOOM Press DIGITAL ZOOM once to select D.ZOOM 1 for partial increase (20X max.) or twice to select D.ZOOM 2 (100X max.) for even greater increase. Because the image is enlarged digitally, the picture may become distorted when the higher magnification levels are used. 3 Press and hold the "T" side of the POWER ZOOM switch.
Before you begin... • Set the POWER switch to CAMERA. This feature helps stabilize the picture in situations such as walking or shooting from a moving vehicle. Press EIS to activate the E.I.S. function. ("EIS" will appear in the EVF.) • The image in the EVF will be enlarged slightly and the shutter speed will be automatically adjusted from 1/100 to 1/250 according to the brightness of the subject. EIS EIS ) 1,2 Press EIS again to cancel.
• The AUTO LOCK switch is in the "NORMAL." AUTO LOCK --'_ Still Use this feature to record a still image from the current camera picture. Press STILL/STROBE once. Press twice more to return to normal recording. Strobe Use this feature to record a strobing progression of still images, (in 1/6 of a second intervals). Press STILL/STROBE twice. Press once more to return to normal recording. STROBE Wide Screen Use this feature to fill the entire screen of your Wide Screen TV.
Before you begin... • Turn ON both units. • Set the recording VCR's Input Signal Selector to LINE. • Set the POWER switch on the Palmcorder to VCR. • Set up and connect the units as illustrated. Connect the AC Adaptor to an AC Outlet. 1 Insert a pre-recorded tape intothe source (Playing) Palmcorder al_d a blank tape with record tab into the editing (recording) unit. 2 Press PLAY on the (Playing) Palmcorder. 3 STILL Press STILL when the tape reaches the point you want to start dubbing.
Before you begin... • Connect the Synchro Edit Cord (optional) as shown below. If the recording unit has no synchro edit jack, use operations on page 32. The Synchro Edit feature simultaneously the Pause mode on both units, so copying is fast and easy. i] _i!_!!_!i_!_!!!_ii!_i_i_ili!! _iiiiii ¸!_iii_i_!_i!_iiii!_!iiiii!i i_ii!iii!iiii releases ] Cable (not supplied) :i:_ Follow steps 1 to 4 on page 32.
Before you begin... • • • • Connect the external Microphone (if used). Turn On the Palmcorder. Insert a cassette (with tab) to be recorded. When using the RF Adaptor to monitor, turn the TV ON and select CH 3 or 4 (see page 22). or RF Adaptor (optional) Your own sound track may be substituted onto a tape using an external microphone or the built-in microphone on your Palmcorder.
Before you begin... • Turn ON the Palmcorder. • Insert a cassette (with tab) to be dubbed. • To monitor the dubbing, see connections on page 36. Your Palmcorder uses advanced Flying Erase Head technology to produce exceptionally clean edits. You can replace existing video segments with new ones such as a title etc. while keeping the original audio. POWER I VCR OFF CAMERA Set the POWER switch to VCR. PLAY 2 STILL Press PLAY to locate the starting point for dubbing.
Before you begin... • Turn On the Palmcorder. • Insert a cassete (with tab) to be dubbed. • When using the RF Adaptor to monitor, turn the TV ON and select CH3 or 4 (see page 22). _iii _............ Connecti0n Use this feature to replace existing audio and video segments with exceptionally clean and precise edits using Flying Erase Head technology. or RF Adaptor (optional) 1 Follow steps 1 and 2 on page 35. DC Power Cable o [] 2 A.DUB o V.
Car Battery Cord (P. 11) • Be sure to start the car engine before inserting the cigarette lighter plug of the Car Battery Cord into the cigarette lighter socket; otherwise, the cigarette lighter plug fuse may burn out when you start the engine. • The car engine should be running while your Palmcorder is in operation. Make sure your car is located in an open, well ventilated area. • Disconnect the cigarette lighter plug when your Palmcorder is not being used.
Your Palmcorder has been designed for normal scene illumination of 150 footcandles (1500 lux). However, the Palmcorder may be used at F1.4, if illumination is more than 0.1 footcandles (1 lux). The table below shows the color temperature for reference.
Strap Attachment Rings See page 7. DC Input Connector See page 11,32, 33, 34, 36. RECORD/PAUSE Button See page 17, 18, 35, 36. Record Button Cover See page 17. Hand Strap This strap can be adjusted to the size of your hand. BA'I-I'ERY RELEASE See page 9. Audio Output Connector See page 22, 32, 33, 34, 36. ideo Output Connector See page 22, 32, 33, 34, 36. Synchro Edit/ Remote Jack See page 33. DO Output Connector for the RF Adaptor See page 22. Tripod Mounting Hole Lens Cap See page 47.
External Microphone Jack See page34. Cassette Compadment See page 19. DATE/TIME Bu_on See page 14. ,HIGH SPEED Button See page 24. BACKLIGHT Button See page 26. Built-In Twin Capsule 2-Way Microphone System WHITE BALANCE Button See page 26. oo (FAR) and NEAR Ring See page 25. Y Tray See page 13. Tally Light See page 17. REMAINING Switch See page 23. Lens Hood See page 38. lOBE Button See page 31. Remote Receiving Sensor See page 19. AUTO LO( See page 12. rAPE SPEED Selector See page 8, 17.
VIDEO DUB Button and Indicator See page 35, 36. POWER ZOOM Switch See page 25, 29. RESET Button See page 23, 35. DISPLAY Button See page 20, 23, 35. ,EJECT Switch page 8, 17. AUDIO DUB Button and Indicator See page 34, 36. Color Electronic Viewfinder (EVF) See page 17, 37. Light Mount See page 16. •POWER Switch See page 17,18, 20,22,34,35. REWIND/SEARCH Bu_on See page 18,20, 27. POWER Indicator PLAY Buffon See page 18,20, 27, 32,34,35. FAST FORWARD/ SEARCH Button See page 20, 27.
REMOTE SIGNAL ! POWER ZOOM ,_..._ Switch \\ See page 19. Button See page 19. REWIND/SEARCH POWER Switch /See "__ OFF EC/ sEk_ _ REW/SEARCH _/ page 19. ..--- RECORD/PAUSE Button See page 19. FFJSEARCH PLAY Button ----__ See page 19. FAST FORWARD/ SEARCH Button See page 19. STOP See page 19. STILL Button See page 19. Charging Indicator Lamp See e 9. Power Indicator Lamp See page 9, 11. Battery Charging Compartment See page 9. Clamp See page 9. AC Power Cord See page 9.
Accessories (Optional/ Supplied) .................... DC Power Cable .................... Record Review ................. 18 2, 6 2, 11, 32, 33, 34, 36 Audio Dubbing .................. 34 Dew Indication ................... 15 Safety Precautions ............. 2 Audiofideo Digital Auto Shutter ........... 24 Search Speed .................. 20 Digital Color Fade .............. 28 Shoulder Strap ........... 2, 6, 7 E.I.S ................................. Special Effect Cable ................
Power Source: Power Consumption: Video Signal: Video Recording System: Audio Track: Pick-Up System: Pick-Up Device: Lens: Viewfinder: Minimum Illumination Required: External Microphone Input Level: Operating Temperature: Operating Humidity: Weight: Dimensions: Compact VHS Patmcorder: DC 6V AC Adaptor: 110/120/220/240V AC, 50/60 Hz Battery: Nickel-Cadmium Type DC 6V Compact VHS Palmcorder: 6V DC 1 lW (Max.
If you have a p_oblem with your Palmcorder, it may be a minor one that you can correct yourself. Use the chart below in case your problem is listed, and then follow the recommendations. Correction Symptom No power ... • Make sure the Power Source is connected. (pp. 9, 11) • Make sure the POWER switch is set to "VCR" or "CAMERA". (pp. 17, 20) • Check the Dew Indicator. (p. 15) • Make sure the battery is fully charged. (p. 9) • Make sure all necessary cables are connected correctly and firmly.(p.
Panasonico Panasonlc Company Division of Matsushlta Corporation Electric of America One Panasonic Way, Secaucus, New Jersey 07094 Printed in Japan VQTW0456 Panssonlc Company (West) of America, Division of Matsushita Electric Corporation of America 6550 Kateila Ave. Cypress, CA 90630 Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. San Gabriel Industrial Park 65th tnfantr_ Avenue KM 9.
