Manual

Universal Remote Control is...
The Remote Controt may be set up to control some basic
DSS or Cable box functions.
Find your DSS box or Cable box Brand Code
Number from one of the charts on the next
page.
Set up remote. Hold down DSS CABLE and
press NUMBER keys to enter code.
• If code number is 100 or greater, e.g., press t _O_ 2 for
102.
Confirm code entry. Press POWER* to turnselected unit ON or OFF.
• See below for controllabte functions in each mode.
• Please repeat the Universal Remote Control Setup after
replacing remote control battedes.
• The remote control will not operate air DSS receivers or Cable
Boxes made by the manufacturers listed, it you get no results,
your particutar brand cannot be controlted.
Once the remote control has been properly set up, you can
select FM/TV, DVD, DSS or CABLE mode depending on
which functions you wish to control.
Press FM/TV, DVD or DSS CABLE on the remote
control to select the desired mode. (See below for buttons
available in each mode.)
DVD
POWER
FM/TV DSS
CABLE
NUMBER
keys
ENTER
Set to FM/TV, DVD:
AllTV, FM,and DVD functions,
Set to DSS CABLE:
• CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys
(except 100 key), CH UP/DOWN.