Manual

Please make all cable or antenna connections before powering on.
[_Jt11_',J]tvJt_
For ANTJCable
Connect the cable from Antenna/Cable to
the VHF/UHF terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your cable box
to the VHF/UHF terminal on the unit with
a RF cable.
WARNING
vertightening "NL_ type" RF coaxial cables
ay damage jacks. Finger tighten only.
INfrom
ANT/CABLE
VHF/UHF
I I e_bEow
Converter B0x
_CABLE
VHF/UHF
II11t1_11[.-]_j]lr_l_ [JLi;]_._JI_ _L_J]
Plug the unit power cord into an AC
wall outlet,
Press POWER* on the remote or unit,The unit comes on and auto channel
and clock set starts,
If AUTO CLOCK SET IS INCOMPLETE
screen appears, set the clock using MANUAL
CLOCK SET procedure on next page.
• if you use a cable box,turn iton and set it to the
Public Broadcasting Service (PBS) channel in your
time zone. If you use a DSS receiver, it must be
turned off.
Settings ere made automatically. When
setup is done, this screen appears.
• Function buttons are inoperative during Initia_ Setup.
• Depending on condiSons, Auto Clock Set may take
longer than 30 minutes. If so, press STOP to stop
setup and perform settings manually. (See page
12-13.)