Manual

Handling
precautions
•Sticking a labet on the
disc may impair DVD-R
playback.
• Do not attach sticker to
disc. (Do not use discs
with exposed adhesive
from tape or teft over
peeled-off stickers.)
• Onty hold disc by edges
as shown betow. .-..f ....
Fingerprints, dirt and
scratches can cause
skipping and distortion.
, Do not write on labet
side of disc. L
°Never use record I //if-,,_, i
cleaning sprays,
benzine, thinner, static
electricity prevention
liquids, or any other
solvent.
°Do not try to close disc Disc t_:ay Disc
tray when disc is not
properly placed.
This unit is designed and manufactured to
respond to the Region Management
Information that is recorded on a DVD disc. If
the Region number described on the DVD
disc does not correspond to the Region
number of this unit, this unit cannot play this
disc.
For U.S.A. and Canada
. The region number of this player is "1".
• The ptayer witl play DVD-Video marked with
labels bearing "1" or 'ALL".
Example:
With a soft, damp (water only) cloth, gently
wipe from the center hole to the outer edge
as shown below. (Wiping in a circular pattern
will scratch the surface.)
• DVD-RAM, DVD-R :
Clean only with the DVD-RAM disc cleaner
available. Never use cloths or cleaners for CDs,
etc.
ff disc is brought from a coJd to a warm
environment, moisture may form on the
disc
Wipe away moisture with a soft, dry, lint-free
cloth before using disc. (See above.)
Improper disc storage
Discs can be damaged if stored or left in
these environment:
• Exposed to direct sunlight.
• Areas that are humid or dusty.
• Near heat (i.e. heater, radiator, etc.).
10