User Guide

17
DVD Operation
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside
down, “PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON
DISC” is displayed.
• Remove disc and press unit POWER off
when not in use.
• Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.
■ Forward/Reverse rapid scene search
->Press SEARCH or SEARCH
during play.
->Press PLAY to release.
• Starting forward/reverse search during play started
from menu on Video CDs may recall menu.
• Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
■ Forward/Reverse Chapter/Track Skip
Press SKIP | or | during play.
Each press skips a chapter (DVD) or track
(Video CD/CD).
• Pressing | SKIP once midway through a
chapter/track returns to start of that chapter/
track. Each additional press skips back one
chapter/track.
• Pressing SKIP
| or | during play started
from menu on Video CDs may recall menu.
■ Still (Pause) Picture
-> Press PAUSE during play.
-> Press PLAY to release.
• DVD/Video CD : The unit will enter Still picture
mode.
• CD : The unit will enter Pause mode.
■ Frame by Frame picture
(DVD/Video CD)
-> Press PAUSE in Still mode.
-> Press PLAY to release.
• Each press advances picture one frame.
• Hold down for consecutive frame advance.
• Whether pictures are advanced by “FRAME” or
“FIELD” is selected automatically (see page 43).
■ Slow Motion picture (DVD/Video CD)
-> Press SLOW or SLOW (DVD only)
in Still mode.
-> Press PLAY to release.
• Slow motion speed, slow at first, is increased with
each additional press of the button up to 5 levels.
• Reverse slow motion is not available for video CDs.
• When
appears on the screen while a button is
being operated, it means that the corresponding
operation is prohibited by the unit or the disc.
Notes
Auto-Power Off function
1.Do steps 1-4 (previous page).
When menu appears, press STOP.
2.Press number key(s) to select
desired track (play begins).
• Check disc for track numbers.
• Press “1” to start at beginning of disc.
To Resume Menu use,
Press STOP, and press PLAY, then menu
appears. Now, go to step 5 (previous page).
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
*Important: If a remote control button does not work when pressed, press the DVD button
on the remote and try the button again.
Current playback position
Reverse Skip Forward Skip
Chapter/Track Chapter/Track Chapter/ T rackChapter/ T rack
LSQT0501_16p23.p65 10/31/2001, 9:12 PM17