Manual

DRC (Dynamic Range
CompresSion)
OFF:
Normal audio range is selected. (Factory
preset)
ON:
For dynamic sound even at low volume.
This is useful for late-night listening.
[Dolby Digital DVDs only].
Type of Recommended setting
_amplifier to LPCM Dolby
be (DVD) Digital dts
eo°_ectod "\,
\,
\ "\
is connected \\
\
AV amplifier
without
Colby PCM PCM*_ PCM*_
eigitaUdte
decoder
AV amplifier
including
Dolby Digita{ PCM Bitstream.3 PCM
decoder
AV amplifier
including
eolby PCM Bitstream*:_ Bitstream.2
eigitaUdts
ldecoder
.4 When connecting an amplifier (with an
optical digital input connector) which does
not contain the Dotby Digital or dts decoder,
be sure to select "PCM 2 tf ' Bitstream" is
selected, starting DVD play may cause
such a high level of noise as to be harmful
to your ears and damage the speakers.
*2 When a dts decoder is connected, please
select _'Bitstream" in "dts." if"PCM" is
selected, there wilt be stereo sound.
_3
When a Dolby Digital decoder is connected,
ptease select "Bitstream" in "Dolby Digital."
If _'PCM ' is selected, there will be stereo
Set to reouce jitter m a displayed still picture
or a motion picture.
! Press ACTION in Stop mode to
display MAiN MENU.
2 Press &T4_ to select "DVD."
3 Press SET to display DVD MAIN
MENU,
4 Press A_' to select "STILL MODE."
5 Press SET repeatedly for mode.
l AUTO:
"FIELD" (Field still) or "FRAME" (Frame
still) Is automaticaltj selected during the
still mode. (Factory preset)
m FieJd:
"FIELD" (Field sti!l) is aNvays selected.
This setting wiII reduce jitter when
compared wig* 'AUTO" on some discs.
•Make settings according to amplifier
connected to optical audio output as shown
Jnabove table.
8 Press ACTION to redispiay DVD
MA!N MENU and go to step 4 to set
up another item. Or, press ACTION
three times to exit.
m Frame:
'FRAME" _Frame stil ) is always selected.
Some texts and fine patterns will be seen
c_ear_y when comsarea wl[n "AUTO" on
some discs.
6 Press ACTION twice to exit this
mode,
57