Manual

Wher_UeiversaJ Remote Control (page 20) is used,
and this feature is set to "ON," e warning appears
whenever an invalid key is pressed In DSS or
Gable mode.
Press ACTION* to display MAIN MENU.
I) Press AT'_ Jl_
to select "TV."
2) Press SET to
dispta_j SETUP
TV screen.
3
1) Press AT to
select
REMOTE
WARNING.
2) Press SET to
set "ON" or
"OFF."
• "REMOTE WARNING : OFF"
Remole warning w{{I not appear even if
invatidkey is pressed.
F#I'#/i_J_
Press ACTION twice to returnto the
normal screen.
When "ON" {s sefeeted, the picture is displayed
even when a broadcast signal Is weak or
non-existent,
Press ACTION to display MA/N MENU.
2
_) PressAIT<
I1_ to select
2) Press SET to
display SET
UP CHANNEL
screen.
3
) PressAT to
setect WEAK
SIGNAL
DISPLAY.
2) Press SET to
set "ON" or
"OFF."
• "ON" = Picture is displayed ragardtess of si#na/
conditi<;_q, aJ_d may not always be clearly
visible.
"OFF_= Screen turns soP_ blu_ when signal is absent
o{ weak.
• ff unit is connected to equipment which has b_e back
feature, sele_ng "ON_will have no effect on rh8 {3taer
equ_men_
Method 1:
Press CH &V. The display will change as
foJlows,
LINE24_,_k- 1 ,_-_-24-_3
Method 2:
a Press ACTION for MAIN MEND.
b Press _.Y_lb _ to select 'qV," then press SET
for SET UP TV screen.
c Press J.y to select _INPUT SELECT," and.
then press SET to select '_TUNER," "L)NE1 of
"LINE2.."
d Press ACTION twice to exit this mode.
Press ACTION twice to returnto thenormal screen.
• Auto Shut Off
No broadcast signal in TV mode (Only when Weak
Signal Display is set to OFF.), DVD stops for 5
minutes.
•-, Power turns off
• T_tSfeatureis ¢anceled if any button is pressed
d_ring above conditions.
_O