Manual

•Equipped with ,-Ibz'-TV Noise
Reduction for true MTS
reproduction.
dbx'-TV Noise Reduction is
required for good stereo separation
and audio fidelity,
dbx®is a registered trademark, and
is licensed by _lbzj Technology
Licensing.
DISPLAY _ @'_ @'_
AUDIO _ _ _' '_
The following are possible audio broadcast types and on-screen
displays. The signal being received is indicated with an "[[c"
mark while the selected audio mode is indicated with an arrow,
To change the audio mode for these broadcasts, see the "Audio
Mode for TV Viewing" section below,
Press DISPLAY to display the broadcast signal being
received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts
are being received simultaneously,
Select the STEREO or SAP audio
mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast, Select STEREO audio
mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio mode
for possible improvement.
SAP broadcast
Secondary Audio Program (sub
language). Select SAP audio mode for
the sub language.
MONO broadcast
Normal monaural sound broadcast.
,I_'I']'U]_',',',',',',',',_JT]T_";_U]"__ILT|T_j
Press AUDIO to select the desired audio mode as described above.
(Arrow shows selection.)
• Each pressof AUDIO will change the audio mode as shown below.
• "SAP" is selected with first pressof AUDIO.
< Example >