Manual

• H ,. , m_[.ill
Select the digital output to be output from the optical
digital audio output connecter of the unit.
Do steps 1 and 2 on page 46,
1) Press AVto
se}ect "AUDlO
OUTPUT."
2) Press SET to
display screen.
N
_,_ se]ect an item.
2) Press SET
repeatedly for
output. (See
be_ow.)
• "LPCM (DVD)" selections
OFF: Linear PCM of less than 48 kHz/t 6 bit
is output. V_
Inlinear PC
digital audi(
PCM: When playil
linear PCM
more. digita
kHzJf 6 bit c
(Digital outF
to4_ kHz/t(
protection.)
• "D Digital'
Bitstn Dolby Di!
output. (F
PCM: When yo
that doe_
decoder.
• "d
Bitatn
POM:
is output,When playing DVDs recorded
in linear PCM of over 48 kHz/20 bit, no
digital audio is output,(Factory preset)
When playing DVDs recorded in
linear PCM of 48 kHz/20 bit/24 bit or
more, digital audio converted to 44.1
kHzJf 6 bit or 48 kNz/t6 bit is output.
(Digital output ct POM audio is restricted
to48 kHz/t6 bit orbelow totcopyright
• "Dolby Digital" selections
Bitstream: Dolby bigite_ bitstream (fch-5.tch) is
output. (Factory preset)
When you have connected a amplifier
that doese't have a bt_lif-in Octby O_g_ta_
• "dts" selections
Bitstream: dts bitstream is output, (Factory p(eset)
When you have connected a amplifier
that doesn't have a built-in dis decoder.
• "DRC (Dynamic Range Compression)"
selections
OFF: Normal audio range is selected. (Factory
preset)
ON: For dynamic sound even at low volume,
this is useful for/atemight listening.
IOolby D)gifa)DVDs on)y].
Press ACTION to redisplay DVD MAINMENU
Sand go to step 2 to setup another item, Or,
press ACTION three times to exit.
_®oo
00®®
8'®®®
=rlE
2®®®
- ACTION
1°
Type of Recommended setting
connested
NOamplifier
__ilisconnected
AVamplifier
Oigita((dts
including
DolbyDigital
decoder
__m*#'vamplifier
includin9
Dolby
Digitaifdts
, Make settings according to amplifier
connected to optical audio output as shown
in above table.
"1 When connecting an ampfffier (with an
optical digital input connecter) which
does net contain the Oolby Digital or
(its decoder, be sure to se_ect"PCM?
If _Bitstream" is selected, starting DVD
play may cause such a high level of noise
as to be harmfuJ to your ears and damage
the speakers.
*2 When a dts decoder Jeconnected, please
select "Bitstream" in "dts:' If"PCM* Js
selected, there wm be stereo sound,
H