Manual

Please make all cable or antenna connections before powering on.

[_Jt11_',J]tvJt_

For ANTJCable

Connect the cable from Antenna/Cable to

the VHF/UHF terminal on the unit.

For DSS/Cable Box

Connect the OUT jack on your cable box

to the VHF/UHF terminal on the unit with

a RF cable.

WARNING

vertightening "NL_ type" RF coaxial cables

ay damage jacks. Finger tighten only.

VHF/UHF

IN from

AN_/CABLE

Cable TV

Converter Box

IN from

ANT/CABLE

II11t1_11[.-]_j]lr_l_ [(i;]_._J I_ _L_J]

Plug the unit power cord into an AC

wall outlet,

Press POWER* on the remote or unit,

The unit comes on and auto channel

and clock set starts,

If AUTO CLOCK SET IS INCOMPLETE

screen appears, set the clock using MANUAL

CLOCK SET procedure on next page.

• if you use a cable box,turn iton and set it to the

Public Broadcasting Service (PBS) channel in your

time zone. If you use a DSS receiver, it must be

turned off.

Settings ere made automatically. When

setup is done, this screen appears.

• Function buttons are inoperative during Initial Setup.

• Depending on condiSons, Auto Clock Set may take

longer than 30 minutes. If so, press STOP to stop

setup and perform settings manually. (See page

12-13.)