Network Function Edition (PT-L785U) This projector has networking functions which allow it to be controlled through a web browser on a PC.
Contents Connecting a PC ..................................................3 System requirements ...............................................3 Connection example ................................................3 Projector Settings ................................................4 Network settings screen ..........................................4 Network status screen .............................................5 Using Web Browser Control ...............................6 Access procedure .............
Connecting a PC System requirements The following system specifications are required in order to use the networking functions. Hardware requirements OS: Windows XP/2000/Me (Millennium Edition)/98SE (Second Edition) CPU: Pentium III or faster or compatible processor (Celeron 633 MHz or faster is recommended) RAM: 64 MB or more (128 MB or more for Windows XP/2000) Hardware conditions: If you want to use the e-mail function, make sure the system can handle e-mail. Web browser: Internet Explorer 6.
Projector Settings Network settings screen 1 Press the [MENU] button. the [ ] buttons to display 2 Use the Network Settings screen, then The menu screen appears. NETWORK NETWORK HOSTNAME WEB CONTROL WEB STANDBY WEB PASSWORD MAC ADDRESS LAN1 PROJECTOR OFF OFF ON ON 00 : 0B : 97 : 41 : 00 : 00 press the [ENTER] button. the [ ] buttons to select a 3 Use parameter, then change its setting.
Network status screen [NETWORK] on the screen 1 Select discussed on the preceding page, then press the [ENTER] button. NETWORK ID DHCP IP ADDRESS SUBNET MASK GATEWAY ENTER LAN1 OFF ON 192.168.0.8 255.255.255.0 192.168.0.254 ESC the [ ] buttons to select a 2 Use parameter, then change its setting. SELECT : [ ] [ ] ENTER : [ENTER] ESC : [MENU] Description Parameter ID IDs are identification numbers under which settings are stored. Three different IDs can be stored (LAN1 through LAN3).
Using Web Browser Control Access procedure the web browser on your PC, then enter the IP 1 Start address which was set in the projector. “user1” in the user name field, then enter the 2 Enter password in the password field. The default setting is “panasonic” (all lower case). If you have changed the password, enter the new password here. If you forget your password, set a new password using the procedure described on page 4. The host name set in the projector is displayed in the “Realm” field.
Basic control page This page is the first page displayed when the projector is accessed through a web browser. To move from another page, click [Projector Control], then [Basic control].
Using Web Browser Control (continued) Detail control page Click [Projector Control], then [Detail control] to display the Detail control page.
Status information page Click [Projector Control], then [Status information] to display the Status information page. When is displayed, refer to the next page.
Using Web Browser Control (continued) Error information page When to display the error details. Items checked for errors is displayed on the status information screen, click it [OK]: Normal [FAILED]: Error Note: In the case of some errors, the standby status is established in order to protect the projector. "WEB STANDBY" must be set to [ON] to display the error information page. (See page 4.
When [FAILED] has appeared for an item: Item Description FAN Trouble has occurred in the fan or its drive circuit. The network functions are disabled when the standby status has been established by this error. INPUT AIR TEMPERATURE The input air temperature is too high. It may be that the projector is being used where the ambient temperature is high such as near a heating appliance. EXHAUST TEMPERATURE The air exhaust temperature is too high. The air outlet or exhaust holes may be blocked.
Using Web Browser Control (continued) E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then [E-mail set up] to display the E-mail setup page.
Button to update settings ON/OFF toggling for permission to send e-mail when error occurs Destination e-mail address field Change lamp usage time set value ON/OFF toggling for permission to send e-mail based on lamp usage time ON/OFF toggling for permission to send email based on air intake sensor temperature The settings for e-mail address 1 are the same.
Using Web Browser Control (continued) DNS server setup page Click [Network Setting], then [DNS Server set up] to display the DNS Server Setup page. Primary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. . . . Secondary DNS server address Available input characters: Numbers (0 - 9), period (.) (ex. . . .
POP server setup page Click [Network Setting], then [POP server set up] to display the POP Server Setup page. Toggling between Enabling/Disabling POP before SMTP POP server user name field POP server name field Available input characters: Alphanumeric characters (A–Z, a–z, 0–9), hyphen (-), period (.
Using Web Browser Control (continued) Adjust clock page Click [Network Setting], then [Adjust clock] to display the Adjust clock page. Time zone selection New date field Button to update time zone setting Button to update time and date settings New time field Note: If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed. Contact the dealer where you bought the projector to have the battery changed.
Network status page Click [Network Setting], then [Network status] to display the Network status page.
Using Web Browser Control (continued) Password change page This page can be used to change the password entered on page 6. The password can be changed even through the PC. See page 4 for information on changing the password through the projector. Click [Change Password].
Professional/Industrial Video Panasonic Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 392-4443 3330 Cahuenga Blvd West Los Angels, CA 90068 (323) 436-3500 Technical Support: (800) 524-1448 (800) 526-6610 FAX: (201) 392-6514 E-Mail: pbtssupport@panasonic.com © 2004 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
