Operating instructions

36-ENGLISH
WHITE BALANCE R/G/B
(RGB only)
This is used to adjust the white
areas of the picture if they appear
colourised. Press the button to
make the selected colour lighter.
Press the button to make the
selected colour stronger.
Projecting sRGB-
compatible pictures
sRGB is an international colour
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colours in
sRGB-compatible pictures to be
reproduced more faithfully, make
the following settings.
qq
Press the or button to
select “PICTURE MODE”, and
then use the or button to
select “NATURAL”.
ww
Press the STANDARD (STD)
button on the remote control
unit.
ee
Press the or button to
select “COLOR TEMP.”, and
then use the or button to
select “STANDARD”.
NOTE:
• sRGB is only enabled when RGB
signals are being input (when
LAMP POWER has been set to
“HIGH”).