Hints and Tips

6.6. Communication Cable Specifications

6.7. Signal Selector Connecting Cable Specifications

When connecting to a signal selector (ex. TW-SWS62J), use a cable with specifications

below.

Connecting method:

Connects a video signal cable from the signal selector to "VIDEO IN", and an RGB

signal cable to "RGB1 IN".

7. Using the WIRED Connector

Two or more projectors can be controlled by a single remote control unit when WIRED

connector, which is on the side interface panel of the projector, is connected as

shown in "7.1. Connection".

7.1. Connection