Operating instructions

54
Obsluha cez webový prehliadač
Obsah odoslanej e-mailovej správy
• Ak boli uskutočnené nastavenia e-mailu, odošle sa správa s
uvedeným obsahom.
• Ak nastane chyba, odošle sa správa s
uvedeným obsahom.
Subject: Panasonic projector report(CONFIGURE)
=== Panasonic projector report(CONFIGURE) ===
Projector Type : D3500
–––––
E-mail setup data –––––
TEMPERATURE WARNING SETUP
MINIMUM TIME at [ 60] minutes interval
INPUT AIR TEMPERATURE Over [ 45C / 113F ]
ERROR [ ON ]
LAMP RUNTIME [ OFF ] at REMAIN [ 0] H
LAMP RUNTIME [ OFF ] at REMAIN [ 0] H
INPUT AIR TEMPERATURE [ OFF ]
PERIODIC REPORT
Sunday [ OFF ] Monday [ OFF ] Tuesday [ OFF ] Wednesday [ OFF ]
Thursday [ OFF ] Friday [ OFF ] Saturday [ OFF ]
00:00 [ OFF ] 01:00 [ OFF ] 02:00 [ OFF ] 03:00 [ OFF ]
04:00 [ OFF ] 05:00 [ OFF ] 06:00 [ OFF ] 07:00 [ OFF ]
08:00 [ OFF ] 09:00 [ OFF ] 10:00 [ OFF ] 11:00 [ OFF ]
12:00 [ OFF ] 13:00 [ OFF ] 14:00 [ OFF ] 15:00 [ OFF ]
16:00 [ OFF ] 17:00 [ OFF ] 18:00 [ OFF ] 19:00 [ OFF ]
20:00 [ OFF ] 21:00 [ OFF ] 22:00 [ OFF ] 23:00 [ OFF ]
––––– check system –––––
MAIN CPU BUS [ OK ]
FAN [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
INPUT AIR TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
•
•
•
Subject: Panasonic projector report(ERROR)
=== Panasonic projector report(ERROR) ===
Projector Type : D3500
––––– check system –––––
MAIN CPU BUS [ OK ]
FAN [ OK ]
OPTICS MODULE TEMPERATURE [ OK ]
INPUT AIR TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
LAMP STATUS [ FAILED
]
SHUTTER [ OK ]
OPTICS MODULE TEMP.SENSOR [ OK ]
INPUT AIR TEMP.SENSOR [ OK ]
AROUND LAMP TEMP.SENSOR [ OK ]
BATTERY [ OK ]
COLOR WHEEL [ OK ]
(Error code 00 40 00 00 00 00 00 00)
Input air temperature : 27 degC / 80 degF
Optics module temperature : 65 degC /149 degF
Around lamp temperature : 27 degC / 80 degF
SET RUNTIME
1857 H
POWER ON 248 times
LAMP ON 177 times
LAMP LOW
0 H
LAMP HIGH
68 H
LAMP REMAIN
1432 H
––––– Network configuration –––––
IP address 192.168.0.8
MAC address 00:00:00:00:00:00
Wed Jan 26 18:54:31 2005
––––– Memo –––––
Nastavenie času
Postupným zvolením položiek [Network set up] a [Adjust clock] vyvolajte stránku nastavenia času.
Výber časového pásma
Tlačidlo aktualizácie nastavenia
časového pásma
Políčko nového dátumu
Tlačidlo aktualizácie nastavenia
času a dátumu
Políčko nového času
Poznámka:
• Ak sa ihneď po zadaní času indikácia zmení na nesprávny čas, je potrebné vymeniť batérie. Obráťte sa na predajcu,
u ktorého ste kúpili projektor, a nechajte si vymeniť batériu.