LCD Projector Remote Control Operating Guide Model No. PT-AE900U ■ This remote control can be used to carry out simple setting operations for your home theatre system in addition to operating the projector (PT-AE900U). ■ Be sure to read this Remote Control Operating Guide carefully in order to use the devices safely. ■ Also be sure to read the instructions for the projector and the home theatre system carefully when using the remote control.
Features This remote control can be used to operate home theatre system devices with a single remote control instead of the inconvenience of having to use several remote controls. Note: Do not use the remote control to operate any other equipment apart from your home theatre system. BUp to a maximum of 8 devices can be operated. Up to a maximum of 8 devices (such as a projector, DVD player/recorder, video deck, TV and amplifier) can be operated.
Names and functions of each part ✱ Buttons shown in this colour are buttons that can be used for learnt functions. System power button This turns the projector power on and off. This turns the power supply for equipment other than the projector on and off. Liquid crystal display LIGHT button Projector power button The top shows the selected device, the bottom shows the functions of that device that can be operated. (✱ pp.
Operation Setting remote control signals for home theatre systems ■ Operating the projector 1 Press the button for the desired operation. BIf operating home theatre system devices When you press [PROJECTOR], operation will switch from the home theatre system back to the projector. ■ Operating the home theatre system 1 Press [SELECT]. This remote control is programmed with remote control signals for Panasonic products at the time of purchase.
Setting remote control signals for home theatre systems ■ Selecting and entering device codes B When “USER 1-3” is selected Note: BFor device codes that have a power remote control signal, the power remote control signal for the device will be transmitted when the device code is selected. Turn the power for the device on as a test. BTwo or more equipment codes cannot be entered for the same device. BDevice codes cannot be entered for “PJ”.
Setting remote control signals for home theatre systems B When “USER 1-3” is selected ■ Setting home theatre system devices when you do not know the device code 3-1 Press the up or down button to select “SEARCH?” and then press [ENTER]. When recording remote control signals for a home theatre system device when you do not know the device code for that device, you can use the search function to make the settings.
Setting remote control signals for home theatre systems ■ Learning remote control signals directly from home theatre system devices If operation is not possible using a device code, you can register other remote control signals for the USER 1-3 buttons. Note: BRemote control signals that are not infrared-type (wave format) signals cannot be recorded. BIt may not be possible to record some types of signal. 1 2 4 Select “USER 1-3” and then press [ENTER].
Deleting home theatre equipment remote control signals You can use either of two methods to delete remote control signals that have been recorded (learnt): by deleting button functions one by one (DELETE), or by deleting all settings for USER 1-3 (OPS RESET). Note: BIf device codes have already been entered for USER 1-3, the device codes will not be deleted. ■ Deleting button functions one by one (DELETE) 1 Press [SETUP] for 3 seconds or more. 2 Select “USER 1-3” and then press [ENTER].
Changing the LCD display contents When remote control signals for a home theatre system device have been learnt for the USER 1-3 function buttons, you can change the “-A-, -B-, -C-” displays on the LCD to your preferred displays. List of characters that can be displayed Upper-case letters: A-Z Numerals: 0-9 5 Use the left and right keys to move to the character to be changed, and use the up and down keys to select the character.
Turning the power for home theatre system devices on and off at once You can use the projector’s remote control to turn the power on and off for home theatre system devices that have been recorded in the remote control. 4 Select the device to be registered. Note: BAt the time of purchase, a macro for turning the power on and off for PJ, DVD, VCR and AMP all at once is set. (Example: When “USER3” is selected) ✱ If a registered device is selected, the display will flash faster.
LCD display list ■ Selected device displays ■ Function button guide Corresponding device Projector (PT-AE900E/U) DVD player/DVD recorder Video deck TV/Cable converter/Satellite receiver Audio amplifier/Receiver DVD, VCR, TV/TNR, AMP, other device (✱ may include devices that cannot be learnt) Selected device display PJ DVD VCR TV/TNR AMP USER1/2/3 Selected device ■ Display messages LCD display CODE ? CODE ? **** DELETE ? DELETED END ERROR EXIT SETUP KEY EDIT ? LEARN ? LEARNING MACRO ? OK OPS RESET ? RES
- : No signals are sent in the corresponding mode. ✱ : Remote control signals can be learnt. (Operation may not be correct for some devices.
Equipment code list Manufacturer name Equipment code Manufacturer name DENON GE HITACHI JVC LG Marantz MITSUBISHI ONKYO Philips Pioneer SAMSUNG SANYO SHARP SONY TOSHIBA YAMAHA 0490, 0503, 0703, 1010, 1011, 1362, 1462, 1490, 1762, 1834, 1905, 1908 0490, 1634 0522, 0717 0573, 0664, 0695, 0713 0503, 0539, 0623, 0867, 1164, 1940 0591, 0741, 0790, 0869 0539 0521, 0713, 1403 0503, 0627 0503, 0539, 0646, 0675, 1158, 1818 0490, 0525, 0571, 0631, 1965 0490, 0573, 1075, 1928 0670, 0695, 0713 0630, 0675, 0713, 075
Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/ C 2005 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
