Operating Instructions Network Operations LCD Projector Commercial Use Model No. PT-VW330U/PT-VX400U PT-VW330E/PT-VX400E PT-VW330EA/PT-VX400EA This manual explains the network operation of the projector. For information other than the network operation, such as the usage, inspection and replacement of parts, see “Operating Instructions - Projector Operations”.
Contents Request Regarding Security · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 What you can do· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Check your computer· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Request Regarding Security When using this product, security breaches of the type described below are conceivable. • Leakage of your private information via this product • Illegal operation of this product by a malicious third-party • Harm to or cessation of operation of this product by a malicious third-party Be sure to implement sufficient security measures. • • • • • Set passwords, and limit the users that are permitted login access. Make sure the password is as hard to guess as possible.
Check your computer Necessary environment for computers to be connected • First, check your computer to see whether or not it has a wired LAN function. “Glossary” (See page 26) • Before connecting the projector to the computer, be sure to check the following settings. Wired LAN • • For LAN cable Is the cable properly connected? Use LAN cable that is compatible with category 5 or above.
NETWORK menu To connect the projector and the computer by changing the setting at the time of purchase, change the setting by displaying the menu with the following procedure. Displaying the NETWORK menu Press the
NETWORK menu (continued) Projector name You can change the projector name to be displayed on the network. 1 Press ▲▼ to select [Projector name], and press
NETWORK menu (continued) Network setup You can make detailed wired LAN settings. 1 Press ▲▼ to select [Network setup], and press
NETWORK menu (continued) Network control Set when you want to control the projector from a computer connected to the network. 1 Press ▲▼ to select [Network control]. 2 Press
NETWORK menu (continued) AMX D.D. This function alows the projector to be detected by AMX Device Discovery. 1 2 Press ▲▼ to select [AMX D.D.]. Press
NETWORK menu (continued) Connecting with Wired LAN Computer operation Connection can be made with wired LAN. However, confirm to your system administrator on network settings before changing any settings. 1 Turn on the computer. 2 Make the network setting according to your system administrator. If the projector settings are the default settings (See page 7), the computer can be used with the following network settings. DHCP IP address Subnet mask Default gateway DNS 1 DNS 2 10 Off 192.168.10.101 255.
Using Web Browser Accessing from the Web browser 1 2 Activate the Web browser in the personal computer. Enter the IP address set by the projector into the URL input field of the Web browser. 3 Enter your “User name” and “Password”. 4 Click [OK] to display the Projector status page. The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the use name and panasonic (lowercase letters) for the password. “Projector status” page is displayed.
Using Web Browser (continued) Description of each item 1 2 3 4 5 6 1 Page selection tabs Click these to switch pages. 2 Monitor information button Click this item, and the status of the projector is displayed. 3 Projector control button Click this item to display the projector control page. 4 Detailed set up button Click this item to display the advanced settings page. 5 Change password button Click this button to display the password change page.
Using Web Browser (continued) Error information page If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click the part to display the details of the error. • Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
Using Web Browser (continued) Basic control page To move from another page, click [Projector control], then [Basic control]. 1 2 3 4 5 1 Power standby/on control 2 Use these to select the input signals 3 Volume adjust 4 Switches image mode 5 Operation of AV mute Detail control page Click [Projector control], then [Advanced control] to display the Detail control page.
Using Web Browser (continued) Change Password page Click [Change password]. 1 1 Administrator 2 User 2 Administrator mode 1 2 3 4 5 6 7 User account 1 2 3 4 5 User mode A user can change password only.
Using Web Browser (continued) Network config page LAN settings You can make detailed wired LAN settings. 1 Click [Detailed set up] in the menu. 2 Click [Change] to change the LAN settings. To return to the previous window, click [Back]. 3 Complete the detailed settings and click [Next]. When [Next] is clicked, the next page appears, enabling you to complete the detailed settings as desired. Settings performed here are the same as the settings performed with the [Network] menu of the projector.
Using Web Browser (continued) Ping test page This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Display which appears when the connection was successful. 1 2 Display which appears when the connection failed. 1 Enter the IP address of the server to be tested. 2 Button for conducting the test.
Using Web Browser (continued) E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Detailed set up], then [E-mail set up] to display the E-mail setup page. 1 2 3 4 5 6 1 Select Enable to use the e-mail function. 2 Enter the IP address or server name of the e-mail server (SMTP). The DNS server must be set if the server name is entered.
Using Web Browser (continued) E-mail setup page (continued) 1 2 1 Enter the E-mail Address2 of your desired recipient. 2 Select the conditions for sending e-mail. MAIL CONTENTS: Select [NORMAL] or [SIMPLE]. ERROR: An error is detected by self-diagnosis. LAMP RUNTIME: Remaining lamp service time has reached the value set in the field. INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
Using Web Browser (continued) Contents of mail sent Mail with the contents shown below is sent when the e-mail settings have been established.
Using Web Browser (continued) Mail with the contents shown below is sent when an error has occurred. Command port set up page Set the port number to be used with command control. Click [Detailed set up] → [Command port set up].
PJLink protocol The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands The following table lists the PJLink protocol commands that can be used to control the projector.
Control commands via LAN When WEB Control administrator rights password is set (Protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No.
Control commands via LAN (continued) When WEB Control administrator rights password is not set (Non-protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No.
Glossary Item Descriptions See page 7 10 DNS Abbreviation for Domain name system. This function sets IP address of the DNS server. DHCP Abbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP addresses to the connected equipment. If a device with the DHCP server function is present within a LAN, it automatically assigns IP addresses to the connected equipment 7 10 Default gateway The devices that are used for different network standards from yours.
ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ Web Site : http://panasonic.
