S P E C F P ro d u c t N u m b e r : PT-ST10 P ro d u c t N a m e : Short-Throw LCD Projector As of July 2010. Specifications subject to change without notice.
S P E C F I L E Short-Throw LCD Projector PT-ST10 Specifications Power supply Power consumption Optical system LCD panel Panel size Display method Drive method Pixels Pixel configuration Lens Lamp Projection size Colors Brightness* 2 Center-to-corner uniformity ratio* 2 Contrast ratio* 2 Resolution RGB Scanning frequency RGB YPBPR S-Video/Video Optical axis shift Keystone correction range On-screen menu Installation Built-in speakers Terminals Size Output power COMPUTER (RGB) IN RGB YPBPR
S P E C F I L E PT-ST10 Short-Throw LCD Projector Dimensions (W × H × D) Weight Operating environment Temperature Humidity 327 × 135 × 307 mm (12-7/8˝ × 5-11/32˝ × 12-3/32˝)*3 Approx. 3.1 kg (6.8 lbs.)* 4 0°– 40°C (32°–104°F)* 5 20%–80% (no condensation) Remote control unit 3 V DC (R03/AAA type battery × 2) Approx. 7 m (23 ft) when operated from directly in front of the signal receptor 46 × 115 × 21 mm (1-13/16˝ × 4-17/32˝ × 27/32˝) Approx. 64 g (2.
S P E F C I L E PT-ST10 Short-Throw LCD Projector Dimensions 11 (7/16 ) 80 ( 3-5/32) 135 ( 5-5/16 ) 124 (4-7/8 ) 50 (1-31/32) 307 (12-3/32) unit : mm (inch) NOTE: This illustration is not drawn to scale. 69 (2-23/32) 214.
S P E F C I L E PT-ST10 Short-Throw LCD Projector Standard setting-up positions unit : mm (inch) 337– 414* (13-9/32– 16-5/16 )* ø49 (1-15/16 ) H ø42 (1-11/16 ) Upper edge of projected image L L: Distance to screen H: Height from the edge of screen to center of lens 174 ( 6-7/8 ) Projected image 284.5 (11-7/32) L Lower edge of projected image NOTE: L Illustrations show the projector installed using optional ceiling bracket.
S P E C F I L E PT-ST10 Short-Throw LCD Projector Installable angle Install the projector at an angle within the range shown below. Note: 10° 10° +30° • Horizontal direction The projector may be installed at a horizontal angle of ±10°. -30° • Vertical direction The projector may be installed at a vertical angle of ±30°. Vertical keystone correction is effective only when the projector is installed at a vertical angle of ±10° or less.
S P E C F I L E PT-ST10 Short-Throw LCD Projector Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 193 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz. The display resolution of this projector is 1,024 × 768 pixels. Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.
S P E F C I L E PT-ST10 Short-Throw LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names 6 9 1 5 No. Signal name Description No.
S P E C F I L E PT-ST10 Short-Throw LCD Projector Control commands Command: Function Callback: PO N * 1/* 2 PO F * 1/* 2 AV L : < p l > II S : < i n p u t s i g n a l > OS T OF Z : < o f f o n > OE N OX G : 0 OX G : 1 OX G : 2 VP M : < N A T > VP M : < S T D > VP M : < D Y N > VP M : < B B D > VP M : < W B D > VX X : D L V I 0 = < + 0 0 0 0 0 > VX X : D L V I 0 = < + 0 0 0 0 1 > VX X : D L V I 0 = < + 0 0 0 0 2 > AU U AU D OM N OC U OC D OC L OC R OA S OS H * 1 OI X DZ U
S P E C F I L E PT-ST10 Short-Throw LCD Projector Status asking commands Command Description QPW Q$S QIN QAV QVC QVT QVB QVR QVS QWR QWG QWB QHP QVP QCP QDC QSP QLG QXG Standby power status Lamp status Input signal status Volume adjustment value Color adjustment value Tint adjustent value Brightness adjustment value Contrast adjustment value Sharpness adjustment value White balance: R adjustment value White balance: G adjustment value White balance: B adjustment value Horizontal position adjustm
S P E C F I L E PT-ST10 Short-Throw LCD Projector Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector’s exhaust openings. 3. Make sure that nothing blocks the projector’s air intake and exhaust openings.
