LCD Projector Specification Sheet

ManualsBrandsPanasonic ManualsProjectorPT-LB80

< 1 >

S PEC F ILE

Product Number : PT-LB80

Product Name : LCD Projector

As of October 2008. Specifications subject to change without notice.

Summary of content (9 pages)

PAGE 1
S P E P ro d u c t N u m b e r : PT-LB80 P ro d u c t N a m e : LCD Projector C F I As of October 2008. Specifications subject to change without notice.
PAGE 2
S P E C F I L E Portable LCD Projector PT-LB80 Specifications 100–240 V AC, 50/60 Hz 300 W (approx. 3 W in standby mode with fan stopped. 28 W in standby mode when controlled by a Web browser.) Dichroic mirror separation/prism synthesis system Optical system 0.
PAGE 3
S P E F C I L E PT-LB80 Portable LCD Projector Remote control unit Power supply Operation range*3 Dimensions (W x H x D) Weight* 2 Supplied accessories Optional accessories 3 V DC (AA battery x 2) Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) Approx. 117 g (4.1 oz) (including batteries) Power cord Power cord secure lock Wireless remote control Batteries for remote control VGA cable for RGB signals (1.
PAGE 4
S P E F C I L E PT-LB80 Portable LCD Projector Standard setting-up positions 357–437 (14-1/16˝– 17-7/32˝) Adjustable in 20-mm (15/32-inch) step. unit : mm (inch) ø49 Upper edge of projected image H (1-15/16˝) ø43 (1-11/16˝) L 117 Projected image L: Distance to screen H: Height from the edge of screen to center of lens (4-19/32˝) H L Lower edge of projected image NOTE: L Projection size Projection distance (L) (diagonal) 0.84 1.02 1.27 1.52 1.78 2.03 2.29 2.54 3.05 3.81 5.08 6.35 7.
PAGE 5
S P E C F I L E PT-LB80 Portable LCD Projector Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 100 MHz. The display resolution of this projector is 1,024 x 768 pixels. Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
PAGE 6
S P E F C I L E PT-LB80 Portable LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names 6 9 1 5 No. Signal name Description No.
PAGE 7
S P E C F I L E PT-LB80 Portable LCD Projector Control commands Command: Function Callback: P O N *1 P O F *1 AVL: IIS: OST OFZ: OEN OXG: VPM: VPM: VPM: VPM: VXX:DLVI0=<+00000> VXX:DLVI0=<+00001> VXX:DLVI0=<+00002> AUU AUD OMN OCU OCD OCL OCR OAS O S H * 1/* 2 OIX DZU DZD Power on (standby mode on) Power off (standby mode off) Volume control Input signal selection The same function as “default” button Freeze Enter Wid
PAGE 8
S P E C F I L E PT-LB80 Portable LCD Projector Parameter format Parameter format Size (Byte) Definition 3 (1 or 2 bytes also possible when under control) 1 3 1 3 3 1 4 1 8 6 Decimal without signs: 0 to 999 (000, 001, 002...999) Decimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) Callback from the projector is 3 Byte.
PAGE 9
S P E C F I L E PT-LB80 Portable LCD Projector Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 150 mm (5-29/32˝) or more around the projector’s exhaust openings. 3.