S P E C F I L E P ro d u c t N u m b e r : PT-LB51S P ro d u c t N a m e : Micro-Portable Wireless LCD Projector As of October 2008. Specifications subject to change without notice.
S P E C F I L E Micro-Portable Wireless LCD Projector PT-LB51S Specifications Power supply Power consumption Optical system LCD panel 100–240 V AC, 50/60 Hz 240 W (approx. 4 W in standby mode with fan stopped.) Dichroic mirror separation/prism synthesis system Panel size 0.6˝ (15.
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Dimensions (W x H x D) Weight Operating environment Remote control unit Temperature Humidity Power supply Operation range*3 Dimensions (W x H x D) Weight 297 x 57 x 210 mm (11-11/16˝ x 2-7/32˝ x 8-1/4˝)* 2 1.8 kg (4.0 lbs.) 0°– 40°C (32°–104°F) 20%–80% (no condensation) 3 V DC (AA battery x 2) Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) 117 g (4.
S P E F C I L E PT-LB51S Micro-Portable Wireless LCD Projector Dimensions 57 (2-1/4˝) 7 (9/32˝) 69 (2-7/16˝) 69 (2-23/32˝) 39 (1-1/2˝) 210 (8-1/4˝) unit : mm (inch) NOTE: This illustration is not drawn to scale.
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Standard setting-up positions 328– 408 (12-29/32˝–16-1/16˝) Adjustable in 20-mm (15/32-inch) step. unit : mm (inch) ø49 (1-15/16˝) Upper edge of projected image E ø43 (1-11/16˝) L 93.5 (3-11/16˝) Projected image L: Distance to screen E: Height from the edge of screen to center of lens E L Lower edge of projected image NOTE: 65 70 (2-3/4˝) L Projection size (diagonal) 0.84 1.02 1.27 1.52 1.78 2.03 2.29 2.54 3.05 3.81 5.08 6.
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 100 MHz. The display resolution of this projector is 1,024 x 768 pixels. Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
S P E F C I L E PT-LB51S Micro-Portable Wireless LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. SERIAL 8-pin DIN (male) CAUTIION Be sure to see that an optional serial adapter ET-ADSER and a RS-232C communication cable match the PC to be connected.
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Control commands Command: Function Callback: PON * 1 POF * 1 AVL: IIS: OST OFZ: OEN VPM: : : :> : AUU AUD OMN OCU OCD OCL OCR OAS OSH * 1/* 2 OIX DZU DZD Power on (standby mode on) Power off (standby mode off) Volume control Input signal selection The same function as “default” button Freeze Enter Picture mode Natural Standard Dynamic Blackboard Volu
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Parameter format Parameter format Size (Byte) Difinition 3 (1 or 2 bytes also possible when under control) 1 3 1 3 3 1 4 1 1 Dicimal without signs: 0-999 (000, 001, 002...999) Dicimal with signs: -99 to +99 (-99...-01, +00, +01, +02...+99) Callback from the projector is 3 Byte.
S P E C F I L E PT-LB51S Micro-Portable Wireless LCD Projector Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 150 mm (5-29/32˝) or more around the projector’s exhaust openings. 3.
