LCD Projector Operating Instructions
Table Of Contents
- Important Safety Notice
- Contents
- Precautions with regard to safety
- Read this first
- About Your Projector
- Setting up
- Connections
- Switching the projector on/off
- Projecting an image
- Remote control operation
- Operating range
- Setting up the image position automatically
- Switching the input signal
- Enlarging the centred area
- Capturing an image
- Stopping the projection
- Resetting to the factory default settings
- Projecting an image in INDEX-WINDOW mode
- Using an assigned function
- Projecting 2 different source image at a time
- Using the laser pointer
- Controlling the volume of the speaker
- Menu Navigation
- PICTURE menu
- POSITION menu
- DISPLAY OPTION menu
- PROJECTOR SETUP menu
- SECURITY menu
- NETWORK menu
- TEMP, LAMP and FILTER Indicators
- Care and Replacement
- Troubleshooting
- Technical Information
- Index
Settings
DISPLAY OPTION menu
ENGLISH - 42
From menu operation, you can apply to the functions,
which are only for the remote control.
OTHER FUNCTIONS
Menu items Refer
AUTO SETUP See page 27.
FREEZE See page 29.
AV MUTE See page 29.
SIDE BY SIDE See page 30.
INDEX-WINDOW See page 29.
DIGITAL ZOOM
You can enlarge the projected
image. Press I H to adjust the
size, and press the ENTER
button.
Press the RETURN button to
return to the normal projection.