LCD Projector Operating Instructions
Table Of Contents
- Important Safety Notice
- Contents
- Precautions with regard to safety
- Read this first
- About Your Projector
- Setting up
- Connections
- Switching the projector on/off
- Projecting an image
- Remote control operation
- Operating range
- Setting up the image position automatically
- Switching the input signal
- Enlarging the centred area
- Capturing an image
- Stopping the projection
- Resetting to the factory default settings
- Projecting an image in INDEX-WINDOW mode
- Using an assigned function
- Projecting 2 different source image at a time
- Using the laser pointer
- Controlling the volume of the speaker
- Menu Navigation
- PICTURE menu
- POSITION menu
- DISPLAY OPTION menu
- PROJECTOR SETUP menu
- SECURITY menu
- NETWORK menu
- TEMP, LAMP and FILTER Indicators
- Care and Replacement
- Troubleshooting
- Technical Information
- Index
Getting Started
Connections
ENGLISH - 22
J Connecting with VIDEO IN/S-VIDEO IN
J Connecting with DVI-D IN
Connecting example: AV equipment
NOTE:
• When you connect more than one AV equipment, switch the audio connection manually.
NOTE:
• DVI-D is single link.
• Prepare a HDMI - DVI-D cable for HDMI connection.
• You may need to change the setting of the DVI EDID in DISPLAY OPTION menu with some DVI-D IN connection. See
“DVI-D IN” on page 40.
• Malfunction may occur or other problems could be encountered with some kind of HDMI or DVI equipment.
• When connecting to the DVI-D IN terminal, you can switch the audio input terminal between COMPUTER AUDIO IN 2
and AUDIO IN. See “AUDIO SETTING” on page 44.
DVD player
Audio system
To S-VIDEO output
Video player
To video output or
audio output
OR
HDMI equipped DVD
player (HDCP)
Audio system
To audio output
To HDMI output
To computer output