LCD Projector Operating Instructions
Table Of Contents
- Important Safety Notice
- Contents
- Precautions with regard to safety
- Read this first
- About Your Projector
- Setting up
- Connections
- Switching the projector on/off
- Projecting an image
- Remote control operation
- Operating range
- Setting up the image position automatically
- Switching the input signal
- Enlarging the centred area
- Capturing an image
- Stopping the projection
- Resetting to the factory default settings
- Projecting an image in INDEX-WINDOW mode
- Using an assigned function
- Projecting 2 different source image at a time
- Using the laser pointer
- Controlling the volume of the speaker
- Menu Navigation
- PICTURE menu
- POSITION menu
- DISPLAY OPTION menu
- PROJECTOR SETUP menu
- SECURITY menu
- NETWORK menu
- TEMP, LAMP and FILTER Indicators
- Care and Replacement
- Troubleshooting
- Technical Information
- Index
Precautions with regard to safety
ENGLISH - 12
Important
Information
Make sure the following accessories are provided with your projector.
* The protectors for enclosed products, such as a plug cover or foam cartons, must be treated properly.
* Contact to an Authorised Service Centre for lost accessories.
Accessories
Remote control for
PT-FW300NTE (x1)
N2QAYB000305
Remote control for
PT-FW300E (x1)
N2QAYB000367
AA batteries for remote
control (x2)
Safety cable
TTRA0141
Attachment screw (x1)
Safety cable (x1)
Mains lead (x1)
K2CM3DH00016
CD-ROM (x1)
TQBH9012
Power cord secure lock
(x1)
TTRA0183