S P E P ro d u c t N u m b e r : PT-F200 P ro d u c t N a m e : LCD Projector C F I L E As of October 2008. Appearance and specifications are subject to change without notice.
S P E C F LCD Projector I L E PT-F200 Specifications Power supply Power consumption Optical system LCD panel 100–240 V AC, 50/60 Hz 330 W (Approx. 4.5 W in standby mode with fan stopped.) Dichroic mirror separation/prism synthesis system Panel size 0.7˝ (17.78 mm) diagonal, 4:3 aspect ratio Display method Transparent LCD panel (x 3, R/G/B) Drive method Active matrix Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels Pixel configuration Stripe Lens Manual zoom (1:1–1:2), manual focus F 1.
S P E C F I L E PT-F200 LCD Projector Dimensions (W x H x D) Weight Operating environment Remote control unit Temperature Humidity Power supply Operation range* 2 Dimensions (W x H x D) Weight 432 x 124.5 x 319 mm (17˝ x 4-29/32˝ x 12-9/16˝) 6.2 kg (13.7 lbs.) 0°– 40°C (32°–104°F) 20%– 80% (no condensation) 3 V DC (AA battery x 2) Approx. 15 m (49´3˝) when operated from directly in front of the signal receptor 48 x 163 x 24.5 mm (1-7/8˝ x 6-13/32˝ x 31/32˝) 117 g (4.
S P E F C I L E PT-F200 LCD Projector Terminals 3 1 7 8 2 9 5 4 6 11 10 1 LAN 2 Computer 1 input 3 Computer 2 input/computer 1 output 4 S-Video input 5 Video input 6 Component input 7 Audio input for component/S-Video/video 8 Serial input 9 Remote input 10 Audio input for computer 1 11 Audio input for computer 2 12 Audio output Standard setting-up positions 369–449 H Upper edge of projected image (14-17/32˝– 17-11/16˝) Adjustable in 20-mm (15/32-inch) step unit
S P E F C I L E PT-F200 LCD Projector Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 4:3 minimum maximum L (m) = (diagonal screen size in inches) x 0.0304 - 0.048 L (m) = (diagonal screen size in inches) x 0.0606 - 0.057 NOTE: Distances calculated with the above equations will include a slight error.
S P E F C I L E PT-F200 LCD Projector Computer data compatibility This projector accepts up to 91 kHz horizontal scanning frequency and 162 MHz dot clock. NOTE: Pixel thinning is applied to signals that exceed a dot clock frequency of 110 MHz. The display resolution of this projector is 1,024 x 768 pixels. If the display resolution indicated in the above data exceeds this resolution, image compression will be used to convert the input signal to 1,024 x 768 pixels.
S P E F C I L E PT-F200 LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names 6 9 1 5 No. Signal name Description No.
S P E C F I L E PT-F200 LCD Projector Control commands Command: Function Callback: PON * 1 POF * 1 AVL: IIS: OST OFZ: OEN OXG: VPM: VPM: VPM: VPM: VXX:DLVI0=<+000 0 0 > VXX:DLVI0=<+000 0 1 > VXX:DLVI0=<+000 0 2 > AUU AUD OMN OCU OCD OCL OCR OAS OSH * 1/* 2 OIX DZU DZD TSD: TST:
S P E C F I L E PT-F200 LCD Projector Parameter format Parameter format Size (Byte) Difinition 3 (1 or 2 bytes also possible when under control) 1 3 1 3 3 1 4 1 8
S P E C F I L E PT-F200 LCD Projector Notes on Projector Placement and Operation: The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector's exhaust openings.
