Datasheet
Table Of Contents
- Front cover
- Specifications
- Dimensions
- Terminals
- Standard setting-up position
- Projection distance for 16:10 aspect ratio screen
- Projection distance for 16:9 aspect ratio screen
- Calculation of the projection distance
- Shift range
- Installable angle
- List of compatible signals
- Serial connector
- Pin assignments and signal names
- Communication conditions (factory setting)
- Basic format
- Cable specifications
- Control commands
- Status request commands
- Command example
- Notes on projector placement and operation
- Direction of air intake and exhaust
- Operating the projector continuously
S P E C F I L E
PT-EZ570/EZ570L
LCD Projectors
As of July 2012
SFL12M004-2
6 / 1 7
Standard setting-up position
C a u t i o n :
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or drop-
ping, attach the wire between the mounting bracket and the ceiling.
Upper edge of projected image
Lower edge of projected image
Projected image
L
L
L
Projected image
HH
∅ 54
(2-1/8)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
860–1,460
*
2
*
2
*
2
*
2
(33-27/32–
57-15/ 32)
951–1,551
(37-7/16 – 61-1/16 )
184.5
(7-1/4)
185.5A*
1
(7-5/16 )
unit : mm (inch)
*1 When the lens protrudes to the maximum.
A: 83.5 mm (3-9/32 in) with the ET-ELW20
64 mm (2-17/32 in) with the supplied lens
88 mm (3-15/32 in) with the ET-ELT20
84 mm (3-5/16 in) with the ET-ELT21
54 mm (2-1/8 in) with the ET-ELW21
*2 Adjustable in 30 mm (1-3/16 in) steps.
NOTE:
Illustrations show the projector
i nstalled using optional ceiling mount
bracket ET-PKE200H and bracket assembly
ET-PKE200B.
This illustration is not drawn to scale.