Datasheet
Table Of Contents
- Front cover
- Specifications
- Dimensions
- Terminals
- Standard setting-up position
- Projection distance for 16:10 aspect ratio screen
- Projection distance for 16:9 aspect ratio screen
- Calculation of the projection distance
- Shift range
- Installable angle
- List of compatible signals
- Serial connector
- Pin assignments and signal names
- Communication conditions (factory setting)
- Basic format
- Cable specifications
- Control commands
- Status request commands
- Command example
- Notes on projector placement and operation
- Direction of air intake and exhaust
- Operating the projector continuously
S P E C F I L E
PT-EZ570/EZ570L
LCD Projectors
As of July 2012
SFL12M004-2
1 0 / 1 7
H
(Width of
projected image)
V
(Height of
projected image)
0.6V0.6V
0.1H0.1H
Standard postition
of projected image
360°
-10°
+10°
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±10°.
• The ET-ELW21 is a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.