S P E P ro d u c t N u m b e r : PT-EX16K P ro d u c t N a m e : LCD Projector C F I L E As of September 2011. Specifications and appearance are subject to change without notice.
S P E C F I L E PT-EX16K LCD Projector Specifications Main unit Power supply 200 –240 V AC, 11 A, 50/60 Hz (3-wire single-phase) NOTE: The projector should be connected to an independent circuit. Please consult your electrician for more details. Power consumption LCD panel 1,850 W (18 W with standby mode) 46 mm (1.
S P E C F I L E PT-EX16K LCD Projector Terminals INPUT 1 HDMI IN DVI-D IN RGB IN R, G, B Menu selection HDMI 19-pin × 1, Deep Color, HDCP compatible 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/25psf, 1125 (1080)/24p, 1125 (1080)/24psf, 1125 (1080)/30p, 1125 (1080)/30psf, 1125 (1080)/60p, 1125 (1080)/50p, VGA (640 × 480) – WUXGA* 2 (1,920 × 1,200) DVI-D 29-pin × 1, DVI 1.
S P E C F I L E PT-EX16K LCD Projector Remote control unit Power supply Operation range* 6 Dimensions (W × H × D) Weight 3 V DC (R03/LR03/AAA type battery × 2) Approximately 5 m (16 ft 5 in) when operated from directly in front of the signal receptor 48 × 145 × 27 mm (1-7/8˝ × 5-23/32˝ × 1-1/16˝) Approx. 102 g (3.
S P E F C I L E PT-EX16K LCD Projector Dimensions 25 ( 31/32) 275 (10-13/16 ) 48 (1-7/8 ) 325 (12-25/32) 275 (10-13/16 ) 301 (11-28-32) 176 ( 6-15/16 ) 349 (13-3/4) 815 ( 32-3/32) unit : mm (inch) NOTE: This illustration is not drawn to scale.
S P E F C I L E PT-EX16K LCD Projector Standard setting-up position 1172 –1532 * 2 (146-5-32–60-5/16) * 2 889–1249 * 2 (35 – 49-3/16)* 2 ∅70 (2-3/4) H Upper edge of projected image * 1 When the lens protrudes to the maximum.
S P E F C I L E PT-EX16K LCD Projector Projection distance for 4:3 aspect ratio screen unit: feet Screen size (diagonal) Distance to screen (L) Zoom ET-ELW06 Zoom lens ET-ELW02 Zoom lens ET-ELW04 Zoom lens ET-ELS02 Zoom lens Fixed-focus ET-ELS03 Zoom lens ET-ELM01 Zoom lens ET-ELT02 Zoom lens ET-ELT03 Zoom lens ET-ELW03 Fixed-focus lens [m] / [in] min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max. 1.02 / 40 3.0 3.8 3.5 4.7 3.8 5.1 4.
S P E F C I L E PT-EX16K LCD Projector Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance.
S P E C F I L E PT-EX16K LCD Projector Installable angle Install the projector at an angle within the range shown below. As of September 2011 SFL11M011-1 • Horizontal direction The projector may be installed at a horizontal angle of ±10°. -10°+10° 360 ° • Vertical direction The projector may be installed at a vertical angle of 360°.
S P E F C I L E PT-EX16K LCD Projector List of compatible signals The signals that can be input to this projector are shown in the table below. Horizontal scanning frequencies of 15 kHz to 100 kHz (15 kHz to 120 kHz for RGB signals), vertical scanning frequencies of 24 Hz to 120 Hz (48 Hz to 120 Hz for RGB signals), and a dot clock of 162 MHz maximum (230 MHz maximum for RGB signals) can be input. NOTE: The native resolution of this projector is 1,024 × 768 pixels.
S P E C F I L E PT-EX16K LCD Projector List of compatible signals Display mode WXGA Display resolution (dots)*1 1280 × 768 1280 × 800 1360 × 768 MAC21 SXGA 1366 1376 1152 1152 × × × × 768 768 870 900 1280 × 960 1280 × 1024 1280 × 1024i MAC SXGA+ 1280 × 960 1280 × 1024 1400 × 1050 WXGA+ 1440 × 900 UXGA UXGA* 2 1600 × 1200 WSXGA+ WUXGA WUXGA* 2 1680 × 1050 1920 × 1200 Scanning frequency H V (kHz) (kHz) 47.8 60.3 68.6 41.2 49.6 49.7 58.3 56.0 57.7 60.0 62.8 64.0 71.6 47.7 56.2 46.
S P E F C I L E PT-EX16K LCD Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names Serial input 5 1 9 6 No. Signal name Description No.
S P E C F I L E PT-EX16K LCD Projector Cable specifications Projector 1 PC (DTE) NC 1 NC 2 2 3 3 4 4 NC NC 6 NC NC 6 7 NC NC 7 8 NC NC 8 9 NC NC 9 5 5 Control commands Command : Parameter Function PON POF IIS:HD1 IIS:DVI IIS:DVI OED:1 IIS:RG1 IIS:SCT IIS:RG2 IIS:RG2 ORF:1 IIS:VID IIS:SVD IIS:AU1,SD1 IIS:AU1,SD2 IIS:AU2,SD1 IIS:AU2,SD2 LPM:0 LPM:3 LPM:2 LPM:1 OLP:2 OLP:0 OLP:3 OLP:4 OSH:0 OSH:1 OFZ:1 OFZ:0 OAS VSE:0 VSE:6 VSE:2 VSE:40 VSE:5 VSE:50 VPM:STD VPM:DYN VPM:
S P E C F I L E PT-EX16K LCD Projector Status request commands Command : Parameter Q PW Function Main power status Q IN Q IN Q ED Input signal status Callback 000 001 HD1 DVI 2 DVI 1 RG1 SCT RG2 0 RG2 1 VID SVD AU1,SD1 AU1,SD2 AU2,SD1 AU2,SD2 0 3 2 1 2 0 3 4 0 1 0 1 0 6 2 40 5 50 0 6 STD DYN CIN REA p1p2p3p4p5 p1p2p3p4 p1p2p3p4 p1p2p3p4 p1p2p3p4 p1p2p3p4/p5p6p7p8 * 1 p1p2p3p4/p5p6p7p8 * 1 Q IN Q IN Q ED Q IN Q SL Lamp operation mode status Q LP Lamp power mode status Q SH Shutter functi
S P E C F I L E PT-EX16K LCD Projector Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Make sure there is an unobstructed space of 1,000 mm (3 feet 3 inches) or more around the projector’s exhaust openings. 2. Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
S P E C F I L E LCD Projector PT-EX16K Operating the projector continuously 1. If the projector is to be operated continuously 24 hours, use the lamp relay mode. The projector cannot be operated continuously 24 hours in quad-lamp mode. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
