Projector User Manual
10
NETWORK menu (continued)
Connecting with Wired LAN
Computer operation
Connection can be made with wired LAN. However, conrm to your system administrator on network settings
before changing any settings.
Turn on the computer.
1
Make the network setting according to your system administrator.
2
If the projector settings are the default settings, the computer can be used with the following network
settings.
DHCP Off
IP address 192.16 8.10.101
Subnet mask 255.255.255.0
Default gateway 192.16 8.10.1
DNS 1
DNS 2
Network factory default
You can reset the network setting to the factory default of the projector.
Press ▲▼ to select [Network factory default], and press <SELECT> button.
1
A conrmation box appears and select [Yes] and then press <SELECT> button. Another
2
conrmation box appears and select [Yes] and then press <SELECT> button.