Operating Instructions Network Operations LCD Projector Commercial Use Model No. PT-EX12KE PT-EX12KU This manual explains the network operation of the projector. For information other than the network operation, such as the usage, inspection and replacement of parts, see “Operating Instructions - Projector Operations”.
Contents Request Regarding Security · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 What you can do· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3 Check your computer· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Request Regarding Security When using this product, security breaches of the type described below are conceivable. • Leakage of your private information via this product • Illegal operation of this product by a malicious third-party • Harm to or cessation of operation of this product by a malicious third-party Be sure to implement sufficient security measures. • • • • • Set passwords, and limit the users that are permitted login access. Make sure the password is as hard to guess as possible.
Check your computer Necessary environment for computers to be connected • First, check your computer to see whether or not it has a wired LAN function. “Glossary” (See page 26) • Before connecting the projector to the computer, be sure to check the following settings. Wired LAN • • For LAN cable Is the cable properly connected? Use LAN cable that is compatible with category 5 or above.
NETWORK menu To connect the projector and the computer by changing the setting at the time of purchase, change the setting by displaying the menu with the following procedure. Displaying the NETWORK menu 1 Press the
NETWORK menu (continued) Projector name You can change the projector name to be displayed on the network. 1 Press ▲▼ to select [Projector name], and press button. Projector name Network setup Input PC adjust Network control Network status Network factory default Image select Image adjust Screen Setting Information Network Exit 2 3 Back Move Next Select characters with the ▲▼◄► buttons and press the button to enter the projector name.
NETWORK menu (continued) Network setup You can make detailed wired LAN settings. 1 Press ▲▼ to select [Network setup], and press button. The detailed [Network setup] screen will be displayed.
NETWORK menu (continued) Network control Set when you want to control the projector from a computer connected to the network. 1 Press ▲▼ to select [Network control]. Projector name Network setup Input PC adjust Network control Network status Network factory default Image select Image adjust Screen Setting Information Network Exit 2 Back Move Next Next Press button or the ► button to access the submenu. Select [WEB control], [PJLink control], [Command control], [AMX D.D.
NETWORK menu (continued) Network status This function shows the LAN setting environment of the currently selected projector. 1 Press ▲▼ to select [Network status]. Projector name Network setup Input PC adjust Network control Network status Network factory default Image select Image adjust Screen Setting Information Network Exit 2 Back Move Next Next Press button or the ► button to show the information of the current projector status.
NETWORK menu (continued) Network factory default You can reset the network setting to the factory default of the projector. 1 Press ▲▼ to select [Network factory default], and press button. 2 A confirmation box appears and select [Yes] and then press button. Another confirmation box appears and select [Yes] and then press button.
Using Web Browser Accessing from the Web browser 1 2 Activate the Web browser in the personal computer. Enter the IP address set by the projector into the URL input field of the Web browser. 3 Enter your “User name” and “Password”. 4 Click [OK]. The factory default settings are user1 (user privileges) or admin1 (administrator privileges) for the use name and panasonic (lowercase letters) for the password. “Projector status” page is displayed.
Using Web Browser (continued) Description of each item 1 2 3 4 5 6 1 Page selection tabs Click these to switch pages. 2 Monitor information button Click this item, and the status of the projector is displayed. 3 Projector control button Click this item to display the projector control page. 4 Detailed set up button Click this item to display the advanced settings page. 5 Change password button Click this button to display the password change page.
Using Web Browser (continued) Error information page If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, click the part to display the details of the error. • Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.
Using Web Browser (continued) Network status page Displays the current configuration information of the network. Displays the configuration details of wired LAN. Basic control page To move from another page, click [Projector control], then [Basic control].
Using Web Browser (continued) Detail control page Click [Projector control], then [Advanced control] to display the Detail control page.
Using Web Browser (continued) Change Password page Click [Change password].
Using Web Browser (continued) Network config page You can make detail network settings on projector, when connecting without the administrator authority or when connecting through an access point (infrastructure mode). 1 Click [Detailed set up] in the menu. 2 Click [Change] to change the LAN settings. 3 Complete the detailed settings and click [Next]. To return to the previous window, click [Back].
Using Web Browser (continued) Ping test page This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS server, etc. Click [Detailed set up], then [Ping test] to display the Ping test page. Display which appears when the connection was successful. 1 2 Display which appears when the connection failed. 1 Enter the IP address of the server to be tested. 2 Button for conducting the test.
Using Web Browser (continued) E-mail setup page With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Detailed set up], then [E-mail set up] to display the E-mail setup page. 1 2 3 4 5 6 1 Select [Enable] to use the e-mail function. 2 Enter the IP address or server name of the e-mail server (SMTP). The DNS server must be set if the server name is entered.
Using Web Browser (continued) E-mail setup page (continued) 1 2 3 1 Enter the E-mail Address2 of your desired recipient. 2 Select the conditions for sending e-mail. MAIL CONTENTS: Select [NORMAL] or [SIMPLE]. ERROR: An error is detected by self-diagnosis. LAMP 1-2 RUNTIME: Remaining lamp service time has reached the value set in the field. INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.
Using Web Browser (continued) Contents of mail sent Mail with the contents shown below is sent when the e-mail settings have been established.
Using Web Browser (continued) Mail with the contents shown below is sent when an error has occurred.
PJLink protocol The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer. Control commands The following table lists the PJLink protocol commands that can be used to control the projector.
Control commands via LAN When WEB Control administrator rights password is set (Protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No.
Control commands via LAN (continued) When WEB Control administrator rights password is not set (Non-protect mode) Connection method 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and make a request for connection to the projector. Acquire the IP address from the menu screen of the projector, and the port number from the WEB control page. IP address : Obtain from MAIN MENU → [Network] → [Network status] Port No.
Glossary Item Descriptions See page 7 10 DNS Abbreviation for Domain name system. This system is to identify targets on the internet with using a domain name, without using an IP address. DHCP Abbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP addresses to the connected equipment. If a device with the DHCP server function is present within a LAN, it automatically assigns IP addresses to the connected equipment.
ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ Web Site : http://panasonic.
