S P E C F I L E The PT-DZ8700U is not equipped with a lens. P ro d u c t N u m b e r : PT-DZ8700U P ro d u c t N a m e : 3-Chip DLP ™ Projector As of May 2011. Specifications and appearance are subject to change without notice.
S P E C F I L E 3-Chip DLP ™ Projector PT-DZ8700U Specifications Main unit Power supply Power consumption DLP™ chip Panel size Display method Pixels Lens Lamp Screen size Brightness* 2 Center-to-corner uniformity* 2 Contrast* 2 Resolution Scanning frequency SDI HDMI/DVI-D/RGB YPBPR (YCBCR) Video/S-Video Optical axis shift Keystone correction range Installation As of May 2011 SFD10M001-2 Vertical Horizontal 120 V AC, 9.5 A, 60 Hz 970 W (1,000 VA) (0.2 W with standby mode set to eco.
S P E C F I L E 3-Chip DLP ™ Projector Terminals SDI IN HDMI IN PT-DZ8700U BNC × 1, SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i Single-link HD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p HDMI 19-pin × 1, Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only)
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Remote control unit Power supply Operation range* 8 Dimensions (W × H × D) Weight 3 V DC (AA type battery × 2) Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor 51 × 176 × 28 mm (2˝ × 6-15/16˝ × 1-3/32˝) Approx. 134 g (4.
S P E F C I L E PT-DZ8700U 3-Chip DLP ™ Projector 540 (21-1/4) 548.5 (21-19/32) Dimensions 462 (18-3/16 ) 100 ( 3-15/16 ) 200 (7-7/8 ) 8.5 (11/32) unit : mm (inch) NOTE: This illustration is not drawn to scale.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector ∅60.5 (2-3/8) H Upper edge of projected image *2 340–420 (13-3/8– 16-17/32) *2 436–516 (17-5/32– 20-5/16) Standard setting-up position L * 1 198 342 (7-25/32) (13-15/32) Projected image *1 When the lens protrudes to the maximum.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Projection distance for 16:10 aspect ratio screen (ET-D75LE6/D75LE10/D75LE20/D75LE30/D75LE4/D75LE8/D75LE5) Unit: meters Screen size (diagonal) Distance to screen (L) Zoom Fixed-focus ET-D75LE6 Zoom lens ET-D75LE10 Zoom lens ET-D75LE20 Zoom lens ET-D75LE30 Zoom lens ET-D75LE4 Zoom lens [m] / [in] min. max. min. max. min. max. min. max. 1.78 / 70 1.35 1.62 1.90 2.46 2.46 3.58 3.56 6.94 6.91 2.03 / 80 1.56 1.86 2.19 2.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Projection distance for 16:10 aspect ratio screen (ET-D75LE1/D75LE2/D75LE3) Unit: meters Screen size (diagonal) Distance to screen (L) ET-D75LE3 Zoom lens Height from the edge of screen to center of lens (H) ET-D75LE1 Zoom lens ET-D75LE2 Zoom lens [m] / [in] min. max. min. max. min. max. 1.78 / 70 2.01 2.69 2.72 4.10 4.11 6.90 -0.05 – 0.99 2.03 / 80 2.31 3.09 3.12 4.70 4.71 7.90 -0.05 – 1.13 2.29 / 90 2.61 3.49 3.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Projection distance for 16:9 aspect ratio screen (ET-D75LE6/D75LE10/D75LE20/D75LE30/D75LE4/D75LE8/D75LE5) Unit: meters Screen size (diagonal) Distance to screen (L) Zoom Fixed-focus ET-D75LE6 Zoom lens ET-D75LE10 Zoom lens ET-D75LE20 Zoom lens ET-D75LE30 Zoom lens ET-D75LE4 Zoom lens [m] / [in] min. max. min. max. min. max. min. max. 1.78 / 70 1.39 1.66 1.96 2.53 2.53 3.68 3.66 7.14 7.10 2.03 / 80 1.60 1.91 2.25 2.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Projection distance for 16:9 aspect ratio screen (ET-D75LE1/D75LE2/D75LE3) Unit: meters Screen size (diagonal) Distance to screen (L) ET-D75LE3 Zoom lens Height from the edge of screen to center of lens (H) ET-D75LE1 Zoom lens ET-D75LE2 Zoom lens [m] / [in] min. max. min. max. min. max. 1.78 / 70 2.07 2.77 2.80 4.22 4.23 7.10 -0.09 – 0.96 2.03 / 80 2.38 3.18 3.21 4.83 4.84 8.13 -0.10 – 1.10 2.29 / 90 2.69 3.59 3.62 5.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 16:10 Zoom lenses ET-D75LE6 minimum maximum L (m) = (diagonal screen size in inches) × 0.0201 – 0.0566 L (m) = (diagonal screen size in inches) × 0.0241 – 0.0736 ET-D75LE10 minimum maximum L (m) = (diagonal screen size in inches) × 0.0284 – 0.
S P E F C I L E PT-DZ8700U 3-Chip DLP ™ Projector Shift range Optical axis shift function allows to shift the position of a projected image as shown below. • When the lens except the ET-D75LE6 is mounted H 0.55V 0.2H 0.55V 0.12V 0.12V (Height of projected image) V 0.2H (Width of projected image) Standard postition of projected image • When the ET-D75LE6 is mounted H 0.44V 0.15H 0.44V 0.12V 0.12V V (Height of projected image) 0.
S P E F C I L E PT-DZ8700U 3-Chip DLP ™ Projector List of compatible signals The signals that can be input to this projector are shown in the table below. Horizontal scanning frequencies of 15 kHz to 100 kHz, vertical scanning frequencies of 24 Hz to 120 Hz, and a dot clock of 162 MHz maximum can be input. NOTE: The native resolution of this projector is 1,920 × 1,200 pixels.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Display mode 1280 × 800 Display resolution (dots)1 1280 x 800 1280 x 800 2 1280 x 800 MSXGA SXGA 1366×768 1280 x 960 1280 × 1024 1280 × 768 SXGA+ 1400 × 1050 WXGA+ 1440 × 900 UXGA60 WSXGA+ 1600 × 1200 1680 × 1050 1920×1080 1920 1920 1920 1920 1920 1920 WUXGA × × × × × × 1080 2 1080 1080 1200 2 1200 1200 Scanning frequency H V (kHz) (kHz) 41.3 49.7 49.3 62.8 71.6 60.0 52.4 64.0 72.3 78.2 80.0 91.1 47.7 39.6 54.1 64.0 65.2 65.3 78.
S P E F C I L E PT-DZ8700U 3-Chip DLP ™ Projector Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names 6 No. 1 2 3 4 5 9 1 5 Signal name – TXD RXD – GND Description NC Send data Receive data Connected internally Ground No.
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Cable specifications Projector 1 PC (DTE) NC NC 2 2 3 3 4 NC NC NC NC 6 7 7 8 8 9 4 5 5 6 1 NC NC 9 Control commands * Command : Parameter Function P ON P OF I IS:SDI I IS:HD1 IIS:DVI IIS:RG1 IIS:RG2 IIS:VID IIS:SVD LPM:0 LPM:1 OSH:0 OSH:1 OPP:0 OPP:1 OPP:2 OPP:3 OAS VPM:NAT VPM:STD VPM:DYN VPM:CIN VPM:GRA VPM:DIC VXX:DLVI0=+0 0000 VXX:DLVI0=+0 0001 VXX:DLVI0=+0 0002 VXX:DLVI0=+0 0003 OTE:4 OTE:9 OTE:10 OTE:p1p2p3p4 TSD:y1
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Status request commands Command : Parameter Q PW Function Main power status QSH Shutter function status Q FZ Freeze function status QIN Input signal status QOS On-screen display status QST Q$L:1 Q$L:2 QSL Projector run time Lamp 1 run time Lamp 2 run time Lamp operation mode status QLP Lamp power mode status QPM Picture mode status QVX:DLVI0 System daylight view status QPP P in P status QTM:0 QTM:1 QTM:2 QGD QGT Temperature stat
S P E C F I L E PT-DZ8700U 3-Chip DLP ™ Projector Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm (19-11/16˝) or more around the projector’s exhaust openings. 3. Do not stack projector units directly on top of one another.
S P E C F I L E 3-Chip DLP ™ Projector PT-DZ8700U Operating the projector continuously 1. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system’s alternating lamp operation (lamp relay) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode. Allow a minimum of two hours per day of non-operation time for each lamp if the projector is to be operated continuously for more than 22 hours. 2.
