Specification Sheet

S P E C F I L E
PT-DX800S/DX800K/DX800LS/DX800LK
DLP
™
Projectors
As of December 2011
SFD11M002-1
8 / 1 4
H
(Width of
projected image)
V
(Height of
projected image)
0.5V
0.1H0.1H
Standard postition
of projected image
H
(Width of
V
(Height of
projected image)
0.5V
0.1H0.1H
Standard postition
of projected image
3 6 0 °
-15°
+15°
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±15°.
• Floor mount
(When the lens except the ET-DLE080 is mounted.)
• Ceiling mount
(When the lens except the ET-DLE080 is mounted.)
H
(Width of
projected image)
V
(Height of
projected image)
0.45V
0.34V
0.1H0.1H
Standard postition
of projected image
H
(Width of
projected image)
V
(Height of
projected image)
0.45V
0.34V
0.1H0.1H
Standard postition
of projected image
• Floor mount
(When the ET-DLE080 is mounted.)
• Ceiling mount
(When the ET-DLE080 is mounted.)
• The ET-DLE055 has a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.