Datasheet
Table Of Contents
- Front cover
- Specifications
- Dimensions
- Terminals
- Standard setting-up position
- Projection distance for 16:10 aspect ratio screen
- Projection distance for 16:9 aspect ratio screen
- Calculation of the projection distance
- Shift range
- Installable angle
- List of compatible signals
- Serial connector
- Pin assignments and signal names
- Communication conditions (factory setting)
- Basic format
- Cable specifications
- Control commands
- Status request commands
- Command example
- Notes on projector placement and operation
- Direction of air intake and exhaust
- Operating the projector continuously
S P E C F I L E
PT-DW740S/DW740K/DW740LS/DW740LK
DLP
™
Projectors
As of July 2012
SFD12M008
6 / 1 6
Standard setting-up position
C a u t i o n :
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or drop-
ping, attach the wire between the mounting bracket and the ceiling.
Upper edge of projected image
255
(10-1/32)
168
(6-5/8)
A*
1
*
2
Lower edge of projected image
Projected image
L
L
L
340–420
(13-3/8–
16-17/32)
416–496
(16-3/8–
19-17/32)
100
(3-15/16)
344
(13-17/32)
100
(3-15/16)
400
(15-3/4)
Projected image
HH
unit : mm (inch)
*1 When the lens protrudes to the maximum.
A: 84 mm (3-5/16 in) with the ET-DLE080
43 mm (1-11/16 in) with the supplied lens
44 mm (1-23/32 in) with the ET-DLE150
45 mm (1-25/32 in) with the ET-DLE250
51 mm (2 in) with the ET-DLE350
95 mm (3-3/4 in) with the ET-DLE450
27 mm (1-1/16 in) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16 in) steps.
NOTE:
Illustrations show the projector installed
using optional ceiling mount bracket
ET-PKD56H and an optional lens.
This illustration is not drawn to scale.