Datasheet

S P E C F I L E
PT-DW740S/DW740K/DW740LS/DW740LK
DLP
™
Projectors
As of July 2012
SFD12M008
4 / 1 6
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
*
1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi-
nal cannot be used. Also, only certain commands can be received for external control using the serial terminal.
*
2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*
3 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*
4 With legs at shortest position.
*
5 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m
to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode)
when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately
20% to protect the projector.
*
6 Operation range differs depending on environments.
Supplied accessories
Optional accessories
Zoom lens (0.8–1.0:1)
Zoom lens (1.4–2.0:1)
Zoom lens (2.4 – 3.8:1)
Zoom lens (3.8 – 5.7:1)
Zoom lens (5.6 – 9.0:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket
Replacement lamp unit
Replacement filter unit
Power cord (× 1)
(× 2 for PT-DW740ES/DW740EK/DW740ELS/DW740ELK)
Power cord security lock (× 1)
Wireless/wired remote control unit (× 1)
Batteries for remote control (R6/AA type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
ET-DLE080
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
ET-LAD60A
ET-LAD60AW (Twin Pack)
ET-EMF300